The automobile fault code P0D43 indicates a problem with the battery charger. The most common symptom is the engine light being ON or the service engine soon warning light.

This fault code can be caused by a faulty battery charger, an open or shorted battery charger harness, or a poor electrical connection in the battery charger circuit. To fix this issue, you should visually inspect the wiring harness and connectors, checking for any damage or corrosion. It is important to look for broken, bent, pushed out, or corroded connector pins.

The repair time for this issue is estimated to be around 1.0 hour.

To interpret the fault code, you can refer to the “Possible Causes” listed above.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

When the engine light is on or the service engine soon warning light is illuminated, it could be a sign of the p0d43 fault code.

  • The symptoms of the automobile fault code p0d43 include the Engine Light being ON and the Service Engine Soon Warning Light being illuminated.

The automobile fault code p0d43 can be caused by a faulty battery charger, an open or shorted battery charger harness, or a poor electrical connection in the battery charger circuit.

  • The fault code p0d43 can be caused by the following: a faulty battery charger, an open or shorted battery charger harness, and poor electrical connection in the battery charger circuit.

To fix the automobile fault code p0d43, start by visually inspecting the wiring harness, connectors, and components for any damage or corrosion.

  • To fix the automobile fault code p0d43, first, check the possible causes mentioned above.
  • Then, visually inspect the wiring harness and connectors related to the issue.
  • Look for any damaged components and check for broken, bent, pushed out, or corroded pins in the connectors.
  • This fix is estimated to take approximately 1.0 hour.

The factors influencing the cost of diagnosing and fixing the automobile fault code p0d43 are the estimated repair time of 1.0 hour and the typical auto repair shop charges of $75 to $150 per hour.

The P0D43 fault code is related to the battery charger control module in your automobile.

This module is responsible for diagnosing its own systems and detecting any fault conditions. It communicates diagnostics and system status to the hybrid powertrain control module 2 through serial data.

The specific DTC for the battery charger control module involves internal measurements that ensure the charger is functioning correctly. It measures internal voltages, currents, and temperatures to verify that they are within the proper range.

In summary, the P0D43 fault code indicates a performance issue with the battery charger’s 14V output voltage sensor.

It is important to address this issue promptly to ensure the proper functioning of your automobile’s charging system.

What are the possible causes for the automobile fault code p0d43?

If you see the engine light or service engine soon warning light on, the fault code P0D43 could be the culprit. This code is often caused by a faulty battery charger or issues with the battery charger harness, such as an open or shorted circuit. To fix the problem, start by visually inspecting the wiring harness and connectors. Look for any damaged components or broken, bent, pushed out, or corroded connector pins. Checking these possible causes can help you get your automobile back on track.

How can I visually inspect the wiring harness and connectors to fix the fault code p0d43?

If you’re dealing with the fault code p0d43 and your engine light is on, it’s time to visually inspect the wiring harness and connectors. This could be caused by a faulty battery charger, an open or shorted battery charger harness, or a poor electrical connection in the battery charger circuit. To fix it, check the possible causes mentioned earlier and give the wiring harness and connectors a thorough visual inspection. Look out for any damaged components and check for broken, bent, pushed out, or corroded connector pins.

What should I look for when checking for damaged components and connector’s pins to resolve the fault code p0d43?

When troubleshooting the fault code P0D43, start by checking for damaged components and connector’s pins. Visually inspect the wiring harness and connectors for any signs of damage. Look for broken, bent, pushed out, or corroded pins on the connectors. These issues can cause a poor electrical connection and lead to the engine light being on. By addressing these potential causes, you can resolve the P0D43 fault code.

p0d43 error fault code explained

If you’re seeing the Engine Light ON or the Service Engine Soon Warning Light, it could be due to a faulty Battery Charger. To fix this issue, visually inspect the wiring harness and connectors, checking for any damage or corrosion.

Look out for broken, bent, pushed out, or corroded connector pins.

Scroll to Top