The automobile fault code P0D39 indicates a problem with the battery charger. The most common symptom is the engine light being ON or the service engine soon warning light.

The cause of this fault code can be a faulty battery charger, an open or shorted battery charger harness, or a poor electrical connection in the battery charger circuit.

To fix this issue, you should visually inspect the wiring harness and connectors for any damage. Look for broken, bent, pushed out, or corroded connector pins. The repair time for this issue is estimated to be around 1.0 hour.

It is important to address this problem promptly to prevent further damage to the vehicle’s electrical system.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

When the engine light is on or the service engine soon warning light is illuminated, it could be a sign of the p0d39 fault code.

  • The symptoms of the automobile fault code p0d39 include the Engine Light being ON or the Service Engine Soon Warning Light being illuminated.

The automobile fault code p0d39 can be caused by a faulty battery charger, an open or shorted battery charger harness, or a poor electrical connection in the battery charger circuit.

  • The fault code p0d39 can be caused by the following: a faulty battery charger, an open or shorted battery charger harness, and poor electrical connection in the battery charger circuit.

To fix the automobile fault code p0d39, start by visually inspecting the wiring harness, connectors, and components for any damage or corrosion.

  • To fix the automobile fault code p0d39, start by checking the possible causes mentioned above.
  • Then, visually inspect the wiring harness and connectors related to the issue.
  • Look for any damaged components and check for broken, bent, pushed out, or corroded connector pins.
  • This fix is estimated to take approximately 1.0 hour.

The factors influencing the cost of diagnosing and fixing the automobile fault code p0d39 are the estimated repair time of 1.0 hour and the typical hourly rate charged by auto repair shops, which ranges from $75 to $150.

The P0D39 fault code refers to the Battery Charger Input Current Sensor Circuit RangePerformance.

This code is related to the battery charger in the vehicle’s hybrid or electric powertrain system. The battery charger is equipped with diagnostic capabilities to detect any faults within its own systems. It communicates the diagnostic and system status information to the hybridEV powertrain control module 2 through serial data. The purpose of this fault code is to monitor the internal measurements of the battery charger and ensure that it is functioning properly.

The charger measures internal voltages, currents, and temperatures and verifies that they are within the correct range. If the measurements fall outside the expected range, the P0D39 fault code is triggered, indicating a potential issue with the battery charger’s input current sensor circuit. When this fault code is detected, it is important to have the vehicle inspected and diagnosed by a qualified technician. They will be able to determine the exact cause of the issue and perform any necessary repairs or replacements to ensure the proper functioning of the battery charger and the overall powertrain system.

What are the possible causes for the automobile fault code p0d39?

If you see the engine light or service engine soon warning light on and you have a fault code of p0d39, it could be due to a faulty battery charger or issues with the battery charger harness. To fix this, visually inspect the wiring harness and connectors for any damage. Check for broken, bent, pushed out, or corroded connector pins. Make sure there are no poor electrical connections. Take a look at the possible causes mentioned above and address them accordingly.

How can I visually inspect the wiring harness and connectors to fix the fault code p0d39?

If you’re dealing with the fault code p0d39 and your engine light is on, it’s time to visually inspect the wiring harness and connectors. This could be caused by a faulty battery charger, an open or shorted battery charger harness, or a poor electrical connection in the battery charger circuit. To fix it, check the possible causes mentioned earlier and visually inspect the wiring harness and connectors. Look out for damaged components and check for any broken, bent, pushed out, or corroded pins in the connectors.

What should I look for when checking for damaged components and connector’s pins to resolve the fault code p0d39?

If you’re dealing with the fault code p0d39 and your engine light is on, it’s time to roll up your sleeves and get to work. The culprit could be a faulty battery charger, an open or shorted battery charger harness, or a poor electrical connection in the battery charger circuit. To fix this issue, start by visually inspecting the wiring harness and connectors. Look out for any damaged components and check for broken, bent, pushed out, or corroded connector’s pins. Don’t forget to check the “Possible Causes” listed above for further guidance.

p0d39 error fault code explained

If you’re seeing the Engine Light ON or the Service Engine Soon Warning Light, it could be due to a faulty Battery Charger. To fix this issue, visually inspect the wiring harness and connectors, checking for any damage or corrosion.

Look out for broken, bent, pushed out, or corroded connector pins.

Scroll to Top