The automobile fault code P0D26 indicates a problem with the HybridEV Battery Charger Receptacle. The most common symptom is the Engine Light being ON or the Service Engine Soon Warning Light.

The cause of this fault code can be a faulty charger receptacle, an open or shorted harness, or a poor electrical connection in the circuit. To fix this issue, you should visually inspect the wiring harness and connectors for any damage. Look for broken, bent, pushed out, or corroded pins in the connectors.

The repair time for this problem is estimated to be around 1.0 hour. It is important to address this issue promptly to prevent further damage to the hybrid or electric vehicle system.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

If you see the Engine Light ON or the Service Engine Soon Warning Light, it could be due to the p0d26 fault code.

  • The symptoms of the automobile fault code p0d26 include the Engine Light being ON or the Service Engine Soon Warning Light being illuminated.

The automobile fault code p0d26 can be caused by a faulty HybridEV Battery Charger Receptacle, an open or shorted harness, or a poor electrical connection in the circuit.

  • The fault code p0d26 can be caused by a faulty Hybrid/EV Battery Charger Receptacle, an open or shorted Hybrid/EV Battery Charger Receptacle harness, or a poor electrical connection in the Hybrid/EV Battery Charger Receptacle circuit.

To fix the automobile fault code p0d26, start by visually inspecting the wiring harness, connectors, and components for any damage or corrosion.

  • To fix the automobile fault code p0d26, start by checking the possible causes mentioned above.
  • Then, visually inspect the wiring harness and connectors related to the issue.
  • Look for any damaged components and check for broken, bent, pushed out, or corroded pins on the connectors.
  • This fix is estimated to take approximately 1.0 hour.

The factors influencing the cost of diagnosing and fixing the automobile fault code p0d26 are the estimated repair time and the hourly rate charged by auto repair shops.

The estimated repair time for this fault code is 1.0 hour. Auto repair shops typically charge between $75 and $150 per hour for their services. These factors will determine the overall cost of diagnosing and fixing the p0d26 fault code.

The P0D26 fault code indicates that the battery charger system precharge time is too long.

Before connecting the battery charger to the hybridEV battery pack, the voltage level of the charger output needs to match the battery pack voltage. This is known as precharge.

During precharge, the charging positive contactor is closed, and the drive motor battery charger cable must be plugged into the hybridEV battery charger receptacle. Utility power also needs to be enabled to the vehicle.

The hybridEV powertrain control module 2 monitors the time it takes to achieve the proper precharge voltage.

If this time exceeds the expected duration, the P0D26 fault code is triggered.

What are the possible causes for the automobile fault code p0d26?

If you’re seeing the engine light on or the service engine soon warning light, the fault code P0D26 could be the culprit. This code is often caused by a faulty hybrid/EV battery charger receptacle, an open or shorted harness, or a poor electrical connection in the hybrid/EV battery charger receptacle circuit. To fix this issue, start by visually inspecting the wiring harness and connectors. Look out for any damaged components and check for broken, bent, pushed out, or corroded connector pins. Don’t forget to check the possible causes mentioned above for a comprehensive solution.

How can I visually inspect the wiring harness and connectors to fix the p0d26 fault code?

If you’re dealing with the p0d26 fault code and your engine light is on, it’s time to take action. The cause could be a faulty Hybrid/EV Battery Charger Receptacle or an open or shorted harness. To fix it, start by visually inspecting the wiring harness and connectors. Look for any damaged components and check for broken, bent, pushed out, or corroded pins on the connectors. Don’t delay, get to the bottom of this issue and ensure a smooth ride ahead.

What should I look for when checking the connector’s pins to resolve the p0d26 fault code?

When resolving the p0d26 fault code, it’s important to check the connector’s pins for any issues. Start by visually inspecting the wiring harness and connectors for any damage. Look out for broken, bent, pushed out, or corroded pins in the connector. These issues can cause a poor electrical connection and trigger the fault code. By identifying and addressing these problems, you can effectively fix the p0d26 fault code and prevent further complications.

p0d26 error fault code explained

If you’re seeing the Engine Light ON or the Service Engine Soon Warning Light, the p0d26 fault code might be the culprit.

This code is usually caused by a faulty HybridEV Battery Charger Receptacle or issues with the wiring harness and electrical connections. To fix it, visually inspect the wiring and connectors, checking for any damage or corrosion. Make sure to look out for broken, bent, pushed out, or corroded connector pins.

Scroll to Top