The automobile fault code P0CE0 indicates a problem with the HybridEV Battery Pack Coolant Control Solenoid Valve. The most common symptom is the Engine Light being ON or the Service Engine Soon Warning Light.

The possible causes include a faulty valve, an open or shorted harness, or a poor electrical connection. To fix this issue, you should visually inspect the wiring harness and connectors for any damage.

Look for broken, bent, pushed out, or corroded pins on the connectors. The repair time for this problem is estimated to be around 1.0 hour.

It is important to address this issue promptly to prevent further damage to the vehicle’s hybrid or electric system.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

When the engine light is on or the service engine soon warning light is illuminated, it could be a sign of the p0ce0 fault code.

  • The symptoms of the automobile fault code p0ce0 include the Engine Light being ON or the Service Engine Soon Warning Light being illuminated.

The automobile fault code p0ce0 can be caused by issues such as a faulty HybridEV Battery Pack Coolant Control Valve or a poor electrical connection in the circuit.

  • The fault code P0CE0 can be caused by the following: – Hybrid/EV Battery Pack Coolant Control Solenoid Valve Learn procedure.
  • – Faulty Hybrid/EV Battery Pack Coolant Control Valve.
  • – Hybrid/EV Battery Pack Coolant Control Valve harness is open or shorted.
  • – Hybrid/EV Battery Pack Coolant Control Valve circuit poor electrical connection.

To fix the automobile fault code p0ce0, start by visually inspecting the wiring harness, connectors, and components for any damage or corrosion.

  • To fix the automobile fault code p0ce0, start by checking the possible causes mentioned above.
  • Then, visually inspect the wiring harness and connectors related to the issue.
  • Look for any damaged components and check if there are any broken, bent, pushed out, or corroded pins in the connectors.
  • This fix is estimated to take approximately 1.0 hour.

The factors influencing the cost of diagnosing and fixing the automobile fault code p0ce0 are the estimated repair time and the hourly rate charged by auto repair shops. The estimated repair time for this fault code is 1.0 hour. Auto repair shops typically charge between $75 and $150 per hour for their services.

These factors will determine the overall cost of diagnosing and fixing the p0ce0 fault code.

The P0CE0 fault code refers to a problem with the hybridEV battery pack coolant control valve. This valve is responsible for controlling the flow of coolant in the battery pack. The control circuit in the powertrain control module can drive the valve motor in both forward and reverse directions.

The valve has three positions: radiator connection, bypass position, and chiller position.

The P0CE0 code indicates that there is a performance issue with this control valve.

What are the possible causes of the automobile fault code p0ce0?

If you’re seeing the engine light on or the service engine soon warning light, the fault code P0CE0 could be the culprit. This code is often caused by issues with the hybrid/EV battery pack coolant control solenoid valve. It could be faulty, or there may be an open or shorted circuit in the valve’s harness. To fix the problem, start by visually inspecting the wiring harness and connectors. Look for any signs of damage or corrosion. Additionally, check for broken, bent, pushed out, or corroded pins in the connectors.

How can I visually inspect the wiring harness and connectors to fix the p0ce0 fault code?

If you’re dealing with the p0ce0 fault code and your engine light is on, it’s time to visually inspect the wiring harness and connectors. This can help you identify and fix the issue. Check for any damaged components and look closely at the connectors for any broken, bent, pushed out, or corroded pins. By doing this, you can ensure a proper electrical connection and potentially resolve the problem. Don’t forget to also consider the other possible causes mentioned earlier.

What should I look for when checking for damaged components and connector’s pins to resolve the p0ce0 fault code?

If you’re dealing with the p0ce0 fault code and your engine light is on, it’s important to visually inspect the wiring harness and connectors. Look out for any damaged components and check for broken, bent, pushed out, or corroded connector’s pins. These issues could be the cause of the fault code. Take the time to thoroughly examine these areas to ensure a proper fix.

p0ce0 error fault code explained

If your engine light is on or you see a service engine soon warning, it could be due to a problem with the HybridEV Battery Pack Coolant Control Solenoid Valve.

To fix it, check the possible causes mentioned above, visually inspect the wiring harness and connectors, and look for any damaged components or corroded pins.

Scroll to Top