The automobile fault code P0CC4 indicates a problem with the StarterGenerator Coolant Pump. When this fault code appears, the Engine Light or Service Engine Soon Warning Light will turn on.

The possible causes for this issue include a faulty StarterGenerator Coolant Pump, an open or shorted harness, poor electrical connection in the StarterGenerator Coolant Pump circuit, or a faulty StarterGenerator Control Module. To fix this problem, you should visually inspect the wiring harness and connectors, checking for any damage or corrosion. Additionally, look for any broken, bent, pushed out, or corroded pins in the connectors.

The repair time for this issue is estimated to be 1.0. It is important to address this fault code promptly to prevent further damage to your vehicle.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

When the engine light is on or the service engine soon warning light is illuminated, it could be a sign of the p0cc4 fault code.

  • The symptoms of the automobile fault code p0cc4 include the Engine Light being ON or the Service Engine Soon Warning Light being illuminated.

The automobile fault code p0cc4 can be caused by a faulty StarterGenerator Coolant Pump, an open or shorted harness, a poor electrical connection in the circuit, or a faulty StarterGenerator Control Module.

  • The fault code p0cc4 can be caused by a faulty Starter/Generator Coolant Pump, an open or shorted harness for the Starter/Generator Coolant Pump, a poor electrical connection in the Starter/Generator Coolant Pump circuit, or a faulty Starter/Generator Control Module.

To fix the automobile fault code p0cc4, start by visually inspecting the wiring harness, connectors, and components for any damage or corrosion.

  • To fix the automobile fault code p0cc4, you need to follow these steps: – Check the possible causes mentioned above.
  • – Visually inspect the wiring harness and connectors related to the fault code.
  • – Look for any damaged components.
  • – Check for broken, bent, pushed out, or corroded pins in the connectors.
  • – Estimated repair time for this fix is 1.0 hour.

The factors influencing the cost of diagnosing and fixing the automobile fault code p0cc4 are the estimated repair time and the hourly rate charged by auto repair shops.

The estimated repair time for this fault code is 1.0 hour.

Auto repair shops typically charge between $75 and $150 per hour for their services.

These factors will determine the overall cost of diagnosing and fixing the p0cc4 fault code.

The P0CC4 fault code refers to a problem with the Drive Motor Coolant Pump Control Circuit.

This circuit controls the coolant pump that circulates coolant through the startergenerator to regulate its temperature. The coolant pump is separate from the engine cooling system and is controlled by a relay. The StarterGenerator Control Module uses a calculation method called exponentially weighted moving average to monitor temperature fluctuations in the startergenerator cooling system.

It also compares the rate of temperature change within a specific time frame when the coolant pump is activated.

If the temperature changes too quickly, the StarterGenerator Control Module will detect a fault and trigger the P0CC4 code.

This fault code indicates that there is a high voltage issue in the Drive Motor Coolant Pump Control Circuit. It could be caused by a faulty relay, a problem with the control module, or a wiring issue. It is important to address this issue promptly to prevent further damage to the startergenerator cooling system.

What are the possible causes for the automobile fault code p0cc4?

If you see the engine light on or the service engine soon warning light, the fault code P0CC4 could be the culprit. This code is often caused by a faulty starter/generator coolant pump, an open or shorted harness, a poor electrical connection in the pump circuit, or a faulty starter/generator control module. To fix the issue, start by visually inspecting the wiring harness and connectors. Look for any damaged components and check for broken, bent, pushed out, or corroded connector pins. Don’t forget to check the possible causes mentioned above.

How can I visually inspect the wiring harness and connectors to fix the fault code p0cc4?

If you’re dealing with the fault code p0cc4 and your engine light is on, it’s time to take action. The cause could be a faulty Starter/Generator Coolant Pump or issues with the harness and connectors. To fix it, visually inspect the wiring harness and connectors for any damage or corrosion. Look out for broken, bent, pushed out, or corroded pins on the connectors. Don’t delay, check for these possible causes and get your engine back in top shape.

What should I look for when checking for damaged components and connector’s pins to resolve the fault code p0cc4?

When resolving the fault code p0cc4, start by checking for damaged components and connector’s pins. This can be done by visually inspecting the related wiring harness and connectors. Look for any signs of damage such as broken, bent, pushed out, or corroded pins. By doing so, you can identify any issues with the Starter/Generator Coolant Pump or its control module, as well as any open or shorted circuits. Take the necessary steps to repair or replace any faulty components or connectors to resolve the issue.

p0cc4 error fault code explained

If you’re seeing the Engine Light ON or the Service Engine Soon Warning Light, the p0cc4 fault code might be the culprit. This code is usually caused by a faulty StarterGenerator Coolant Pump or issues with the harness, circuit connection, or the StarterGenerator Control Module. To fix it, visually inspect the wiring harness and connectors for any damage, and check for broken, bent, pushed out, or corroded pins on the connectors.

Scroll to Top