The automobile fault code P0C85 indicates a problem with the HybridEV Battery Assembly. The most common symptom is the Engine Light being ON or the Service Engine Soon Warning Light. The cause of this fault code can be a faulty HybridEV Battery Assembly, an open or shorted harness, a poor electrical connection in the circuit, or a faulty HybridEV Battery Interface Control Module.
To fix this issue, you should visually inspect the wiring harness and connectors for any damage.
Look for broken, bent, pushed out, or corroded pins in the connectors.
The repair time for this issue is estimated to be around 1.0 hour. It is important to address this problem promptly to prevent further damage to the vehicle.
Repair Importance Level | 10.0 (Out of 10) |
Estimated Repair Time | Approximately 1.0 hour |
Repair Difficulty Level | 10.0 (Out of 10) |
Unveiling The Symptoms: Decoding Fault Code P0C85 In Your Automobile
When the engine light is on or the service engine soon warning light is illuminated, it could be a sign of the p0c85 fault code.
- The symptoms of the automobile fault code p0c85 include the Engine Light being ON or the Service Engine Soon Warning Light being illuminated.
Unraveling The Mystery: What Causes Fault Code P0C85?
The automobile fault code p0c85 can be caused by a faulty HybridEV Battery Assembly, an open or shorted HybridEV Battery Assembly harness, a poor electrical connection in the HybridEV Battery Assembly circuit, or a faulty HybridEV Battery Interface Control Module.
- The fault code P0C85 can be caused by a faulty Hybrid/EV Battery Assembly, an open or shorted Hybrid/EV Battery Assembly harness, a poor electrical connection in the Hybrid/EV Battery Assembly circuit, or a faulty Hybrid/EV Battery Interface Control Module.
Fixing Code P0C85: Simple Steps To Resolve The Fault
To fix the automobile fault code p0c85, start by visually inspecting the wiring harness, connectors, and components for any damage or corrosion.
- To fix the automobile fault code p0c85, start by checking the possible causes mentioned above.
- Then, visually inspect the wiring harness and connectors related to the issue.
- Look for any damaged components and check for broken, bent, pushed out, or corroded pins on the connectors.
- This fix is estimated to take approximately 1.0 hour.
Cracking The Code: P0C85 – Cost And Complexity Unveiled!
The factors influencing the cost of diagnosing and fixing the automobile fault code p0c85 are the estimated repair time and the hourly rate charged by auto repair shops. The estimated repair time for this fault code is 1.0 hour. Auto repair shops typically charge between $75 and $150 per hour for their services.
These factors will determine the overall cost of diagnosing and fixing the p0c85 fault code.
P0C85 Fault Code: Understanding The Description And Troubleshooting Steps
The P0C85 fault code refers to a problem with the HybridEV Battery Temperature Sensor 8 Circuit.
This sensor is responsible for monitoring the temperature of the battery in hybrid or electric vehicles. It is located within the battery sections and there are two temperature sensors in each section.
The sensor works by measuring the resistance of the battery cell group, which changes with temperature.
As the temperature decreases, the sensor resistance increases, and as the temperature increases, the sensor resistance decreases. The HybridEV Interface Control Module supplies 5V to the signal circuit and acts as a ground for the low reference circuit.
It communicates the temperature sensor values to the HybridEV Powertrain Control Module via serial data. When the HybridEV Powertrain Control Module detects that the hybrid battery temperature sensor is intermittent or has changed by 10°C (18°F) or more for 4 out of 5 seconds, it sets the P0C85 fault code.
This indicates a circuit error with the HybridEV Battery Temperature Sensor 8. If you encounter this fault code, it is important to have the sensor and circuit checked and repaired by a qualified technician. Ignoring this issue could lead to problems with the battery cooling system operation and potentially affect the overall performance of your hybrid or electric vehicle.
FAQ
If you see the engine light on or the service engine soon warning light, the fault code P0C85 could be the culprit. This code is often caused by a faulty hybrid/EV battery assembly, an open or shorted harness, a poor electrical connection in the hybrid/EV battery assembly circuit, or a faulty hybrid/EV battery interface control module. To fix this issue, visually inspect the wiring harness and connectors, checking for any damage or broken, bent, pushed out, or corroded pins in the connectors. Don’t forget to consider the possible causes mentioned above.
If you’re dealing with the fault code p0c85 and your engine light is on, it’s time to take a closer look at the wiring harness and connectors. The possible causes include a faulty Hybrid/EV Battery Assembly, an open or shorted harness, a poor electrical connection in the circuit, or a faulty Hybrid/EV Battery Interface Control Module. To fix the issue, visually inspect the wiring harness and connectors for any signs of damage. Pay attention to broken, bent, pushed out, or corroded pins on the connectors. Don’t forget to check the “Possible Causes” mentioned earlier.
If you’re dealing with the fault code p0c85 and your engine light is on, it’s important to check for damaged components and connector’s pins. This code is often caused by a faulty Hybrid/EV Battery Assembly or issues with the wiring harness and connectors. To resolve the issue, visually inspect the wiring harness and connectors, paying close attention to any signs of damage. Look for broken, bent, pushed out, or corroded connector’s pins. By identifying and addressing these issues, you can effectively fix the fault code p0c85.
![p0c85 error fault code explained](https://carmodnerd.com/wp-content/uploads/2023/07/P0C85-error-fault-code.jpg)
Wrap Up
If you’re seeing the Engine Light ON or the Service Engine Soon Warning Light, the p0c85 fault code might be the culprit.
This code is usually caused by a faulty HybridEV Battery Assembly, an open or shorted harness, a poor electrical connection in the circuit, or a faulty HybridEV Battery Interface Control Module.
To fix it, visually inspect the wiring harness and connectors, checking for any damage or corrosion. Look out for broken, bent, pushed out, or corroded pins on the connectors.