The automobile fault code P0C79 indicates a problem with the Drive Motor ‘A’ Inverter. This can cause the Engine Light or Service Engine Soon Warning Light to turn on. The possible causes include a faulty inverter, an open or shorted inverter harness, or a poor electrical connection in the inverter circuit.

To fix this issue, you should visually inspect the wiring harness and connectors for any damage. Check for broken, bent, pushed out, or corroded pins in the connectors. The repair time for this problem is estimated to be around 1.0 hour.

It is important to address this issue promptly to prevent further damage to the vehicle.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

When the engine light is on or the service engine soon warning light is illuminated, it could be a sign of the p0c79 fault code.

  • The symptoms of the automobile fault code p0c79 include the Engine Light being ON or the Service Engine Soon Warning Light being illuminated.

The automobile fault code p0c79 can be caused by a faulty drive motor inverter, an open or shorted inverter harness, or a poor electrical connection in the inverter circuit.

  • The fault code P0C79 can be caused by the following: 1.
  • Faulty Drive Motor ‘A’ Inverter.
  • 2.
  • Drive Motor ‘A’ Inverter harness is open or shorted.
  • 3.
  • Drive Motor ‘A’ Inverter circuit has a poor electrical connection.

To fix the automobile fault code p0c79, start by visually inspecting the wiring harness, connectors, and components for any damage or corrosion.

  • To fix the automobile fault code p0c79, start by checking the possible causes mentioned above.
  • Then, visually inspect the wiring harness and connectors for any damage.
  • Look for broken, bent, pushed out, or corroded pins on the connectors.
  • This fix should take approximately 1.0 hour.

The factors influencing the cost of diagnosing and fixing the automobile fault code p0c79 are the estimated repair time and the hourly rate charged by auto repair shops. The estimated repair time for this fault code is 1.0 hour. Auto repair shops typically charge between $75 and $150 per hour for their services.

These factors will determine the overall cost of diagnosing and fixing the p0c79 fault code.

The P0C79 fault code refers to the Drive Motor ‘A’ Inverter Voltage being too high. This code is set by the Engine Control Module (ECM) when the Drive Motor ‘A’ Inverter does not meet the factory specifications. It indicates that there is an issue with the voltage level in the inverter, which can affect the performance of the drive motor.

When this fault code is triggered, it is important to address it promptly to prevent further damage to the vehicle.

The high voltage in the inverter can lead to various problems, such as overheating or malfunctioning of the drive motor. It is recommended to have a qualified technician diagnose and repair the issue to ensure the proper functioning of the inverter and drive motor.

Ignoring this fault code can result in reduced performance and potential safety hazards.

What are the possible causes for the automobile fault code P0C79?

If you see the engine light or service engine soon warning light on, the fault code P0C79 could be the culprit. This code is often caused by a faulty drive motor ‘A’ inverter, an open or shorted inverter harness, or a poor electrical connection in the inverter circuit. To fix this issue, start by visually inspecting the wiring harness and connectors. Look for any signs of damage or corrosion, and check for broken or bent pins. Taking these steps can help you identify and resolve the problem.

How can I visually inspect the wiring harness and connectors to fix the P0C79 fault code?

If you’re dealing with the P0C79 fault code and your engine light is on, it’s time to take action. The cause could be a faulty Drive Motor ‘A’ Inverter or an open or shorted harness. To fix it, start by visually inspecting the wiring harness and connectors. Look for any signs of damage, like broken or bent pins, corrosion, or components that are out of place. Don’t delay – check for these possible causes and get your car back on track.

What should I look for when checking for damaged components and connector’s pins to resolve the P0C79 fault code?

When resolving the P0C79 fault code, start by checking for damaged components and connector’s pins. This fault code is often caused by a faulty Drive Motor ‘A’ Inverter or an open or shorted harness. To fix the issue, visually inspect the wiring harness and connectors. Look for any signs of damage, such as broken, bent, pushed out, or corroded pins. By addressing these possible causes, you can resolve the issue and turn off the Engine Light or Service Engine Soon Warning Light.

p0c79 error fault code explained

If your engine light is on and you’re seeing the “p0c79” fault code, it could be due to a faulty Drive Motor ‘A’ Inverter or issues with the wiring harness and circuit connection.

To fix it, visually inspect the wiring harness and connectors for any damage, and check for broken or corroded pins.

Scroll to Top