The automobile fault code P0C77 indicates a problem with the inverter and converter assembly in the vehicle. This issue can be identified by the engine light or service engine soon warning light turning on.

The possible causes include a faulty inverter with converter assembly, an open or shorted harness, poor electrical connection in the circuit, or a faulty power management control ECU. To fix this problem, it is recommended to visually inspect the wiring harness and connectors for any damage.

Look for broken, bent, pushed out, or corroded pins in the connectors.

The repair time for this issue is estimated to be around 1.0.

It is important to address this fault code promptly to prevent further damage to the vehicle.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

When the engine light is on or the service engine soon warning light is illuminated, it could be a sign of the p0c77 fault code.

  • The symptoms of the automobile fault code p0c77 include the Engine Light being ON or the Service Engine Soon Warning Light being illuminated.

The automobile fault code p0c77 can be caused by a faulty inverter with converter assembly, open or shorted harness, poor electrical connection in the circuit, or a faulty power management control ECU.

  • The fault code P0C77 can be caused by the following: 1.
  • Faulty inverter with converter assembly.
  • 2.
  • Inverter with converter assembly harness is open or shorted.
  • 3.
  • Inverter with converter assembly circuit has a poor electrical connection.
  • 4.
  • Faulty power management control ECU.

To fix the automobile fault code p0c77, start by visually inspecting the wiring harness, connectors, and components for any damage or corrosion.

  • To fix the automobile fault code p0c77, first, check the possible causes mentioned above.
  • Then, visually inspect the wiring harness and connectors related to the issue.
  • Look for any damaged components and check for broken, bent, pushed out, or corroded pins in the connectors.
  • This fix is estimated to take approximately 1.0 hour.

The factors influencing the diagnosis and fixing cost of the automobile fault code p0c77 are the estimated repair time and the hourly rate charged by auto repair shops. The estimated repair time for this fault code is 1.0 hour. Auto repair shops typically charge between $75 and $150 per hour for their services.

These factors will determine the overall cost of diagnosing and fixing the p0c77 fault code.

The P0C77 fault code indicates that the hybrid battery system precharge time is too short. This fault code is related to the inverter in the hybrid vehicle. The inverter is responsible for converting high-voltage direct current from the HV battery into three-phase alternating current for the generator and motor.

It also converts three-phase alternating current from the generator and motor into direct current for the HV battery. The inverter contains power transistors (IGBTs) that are controlled by the MG ECU. The inverter transmits important information, such as amperage and voltage, to the MG ECU for control purposes.

When the precharge time of the hybrid battery system is too short, it can indicate a problem with the inverter’s functionality.

What are the possible causes of the automobile fault code p0c77?

If you see the engine light on or the service engine soon warning light, the fault code P0C77 could be the culprit. This code is often caused by a faulty inverter with converter assembly, an open or shorted harness, a poor electrical connection in the inverter with converter assembly circuit, or a faulty power management control ECU. To fix this issue, visually inspect the wiring harness and connectors, checking for any damage or broken, bent, pushed out, or corroded pins. Don’t forget to also consider the possible causes mentioned above.

How can I visually inspect the wiring harness and connectors to fix the fault code p0c77?

If you’re dealing with the fault code p0c77 and your engine light is on, it’s time to take a closer look at the wiring harness and connectors. The possible causes include a faulty inverter with converter assembly, an open or shorted harness, a poor electrical connection in the circuit, or a faulty power management control ECU. To fix the issue, visually inspect the wiring harness and connectors for any signs of damage. Pay attention to broken, bent, pushed out, or corroded pins on the connectors. This step will help you identify and address any issues with the electrical components.

What should I look for when checking for damaged components and connector’s pins to resolve the fault code p0c77?

When troubleshooting the fault code P0C77, start by checking for damaged components and connector’s pins. Visually inspect the wiring harness and connectors for any signs of damage. Look for broken, bent, pushed out, or corroded pins on the connectors. These issues can cause poor electrical connections and lead to the engine light being on. By addressing these potential causes, you can resolve the P0C77 fault code.

p0c77 error fault code explained

If you’re seeing the Engine Light ON or the Service Engine Soon Warning Light, the issue could be a faulty Inverter with converter assembly or a problem with the wiring harness or circuit connection. To fix it, visually inspect the wiring and connectors, checking for any damage or corrosion.

Scroll to Top