The automobile fault code P0C67 indicates a problem with the hybrid system in your vehicle. The most common symptom is the Engine Light being ON or the Service Engine Soon Warning Light.

This fault code can be caused by a faulty inverter with converter assembly, hybrid vehicle generator assembly, motor assembly, or a wire harness or connector issue. To fix this, you should visually inspect the wiring harness and connectors for any damage.

Look for broken, bent, pushed out, or corroded pins on the connectors. The repair time for this issue is estimated to be around 1.0 hour. It is important to address this fault code promptly to prevent further damage to the hybrid system.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

When the engine light is on or the service engine soon warning light is illuminated, it could be a sign of the p0c67 fault code.

  • The symptoms of the automobile fault code p0c67 include the Engine Light being ON or the Service Engine Soon Warning Light being illuminated.

The fault code p0c67 can be caused by a faulty inverter with converter assembly, hybrid vehicle generator assembly, motor assembly, or wire harnessconnector.

  • The fault code P0C67 can be caused by a faulty inverter with converter assembly, a faulty hybrid vehicle generator assembly, a faulty hybrid vehicle motor assembly, or a problem with the wire harness or connector.

To fix the automobile fault code p0c67, start by visually inspecting the wiring harness, connectors, and components for any damage or corrosion.

  • To fix the automobile fault code p0c67, start by checking the possible causes mentioned above.
  • Then, visually inspect the wiring harness and connectors related to the issue.
  • Look for any damaged components and check if there are any broken, bent, pushed out, or corroded pins in the connectors.
  • This fix is estimated to take approximately 1.0 hour.

The automobile fault code P0C67 diagnosis and fixing cost is influenced by the estimated repair time of 1.0 hour. Auto repair shops typically charge between $75 and $150 per hour for their services.

The P0C67 fault code refers to a malfunction in the Generator Position Sensor Circuit ‘A’. This sensor, also known as a resolver, is responsible for detecting the position of the magnetic poles in the rotor of a motor generator. It is crucial for precise control of MG2 and MG1. The resolver consists of a stator with an excitation coil and two detection coils (S, C).

As the rotor turns, the gap between the stator and rotor changes due to the oval shape of the rotor.

An alternating current flows through the excitation coil, and the detection coils output alternating currents based on the rotor’s position. The MG ECU, which is the inverter with converter assembly, uses the phases and waveforms of the detection coils to determine the absolute position of the rotor. It also calculates the amount of change in position over a specific time to utilize the resolver as a speed sensor.

However, when the MG ECU detects high readings in the Generator Position Sensor Circuit ‘A’, it indicates a malfunction, triggering the P0C67 fault code.

What are the possible causes of the automobile fault code P0C67?

If you see the engine light or service engine soon warning light on, the fault code P0C67 could be the culprit. This code is often caused by a faulty inverter with converter assembly, hybrid vehicle generator assembly, hybrid vehicle motor assembly, or a problem with the wire harness or connector. To fix it, start by visually inspecting the wiring harness and connectors. Look for any damaged components and check for broken, bent, pushed out, or corroded connector pins. Don’t forget to check the possible causes mentioned earlier.

How can I visually inspect the wiring harness and connectors to fix the P0C67 fault code?

If you’re dealing with the P0C67 fault code and your engine light is on, it’s time to visually inspect the wiring harness and connectors. This fault code can be caused by a faulty inverter with converter assembly, hybrid vehicle generator assembly, motor assembly, or even a problem with the wire harness or connector. To fix it, check the possible causes mentioned earlier and give the wiring harness and connectors a thorough visual inspection. Look out for any damaged components and check for broken, bent, pushed out, or corroded connector pins.

What should I look for when checking for damaged components or broken, bent, pushed out, or corroded connector’s pins to resolve the P0C67 fault code?

When resolving the P0C67 fault code, start by visually inspecting the wiring harness and connectors. Look for any damaged components and check for broken, bent, pushed out, or corroded connector’s pins. These issues can often be the cause of the problem. By thoroughly examining these areas, you can identify and address any issues that may be contributing to the fault code.

p0c67 error fault code explained

If you’re seeing the Engine Light ON or the Service Engine Soon Warning Light, it could be due to a faulty Inverter with converter assembly, Hybrid vehicle generator assembly, Hybrid vehicle motor assembly, or a problem with the wire harness or connector. To fix it, visually inspect the wiring harness and connectors for any damage or corrosion. Check for broken, bent, pushed out, or corroded connector pins.

Scroll to Top