The automobile fault code P0C64 indicates a problem with the hybrid system.

When this code appears, the engine light or service engine soon warning light will turn on.

The possible causes of this fault code include a faulty inverter with converter assembly, hybrid vehicle generator assembly, motor assembly, or a wire harness or connector issue. To fix this problem, you should visually inspect the wiring harness and connectors for any damage.

Look for broken, bent, pushed out, or corroded pins on the connectors. The repair time for this issue is estimated to be around 1.0 hour.

It is important to address this fault code promptly to ensure the proper functioning of the hybrid system.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

When the engine light is on or the service engine soon warning light is illuminated, it could be a sign of the p0c64 fault code.

  • The symptoms of the automobile fault code p0c64 include the Engine Light being ON or the Service Engine Soon Warning Light being illuminated.

The fault code p0c64 can be caused by a faulty inverter with converter assembly, hybrid vehicle generator assembly, motor assembly, or wire harnessconnector.

  • The fault code P0C64 can be caused by the following: 1.
  • Faulty inverter with converter assembly.
  • 2.
  • Faulty hybrid vehicle generator assembly.
  • 3.
  • Faulty hybrid vehicle motor assembly.
  • 4.
  • Issues with the wire harness or connector.

To fix the automobile fault code p0c64, start by visually inspecting the wiring harness, connectors, and components for any damage or corrosion.

  • To fix the automobile fault code p0c64, first, check the possible causes mentioned above.
  • Then, visually inspect the wiring harness and connectors related to the issue.
  • Look for any damaged components and check for broken, bent, pushed out, or corroded pins in the connectors.
  • This fix is estimated to take approximately 1.0 hour.

The automobile fault code P0C64 diagnosis and fixing cost is influenced by the estimated repair time, which is 1.0 hour. Most auto repair shops charge between $75 and $150 per hour for their services.

The P0C64 fault code refers to a malfunction in the Generator Position Sensor Circuit ‘A’.

This code indicates an issue with the sensor that detects the position of the magnetic poles in the rotor of a motor generator. The resolver, which contains an excitation coil and two detection coils, is responsible for providing precise control of the motor generator.

The resolver works by sending an alternating current through the excitation coil and detecting the position of the rotor through the output of the detection coils.

The inverter with converter assembly, also known as the MG ECU, uses the signals from the detection coils to determine the absolute position of the rotor and calculate changes in position over time. When the MG ECU detects a malfunction in the signals output from the motor resolver, it triggers the P0C64 fault code. This code alerts the driver or technician to the issue with the Generator Position Sensor Circuit ‘A’ and indicates that further diagnosis and repair are needed to resolve the problem.

What are the possible causes of the automobile fault code p0c64?

If you see the engine light or service engine soon warning light on, the fault code P0C64 could be the culprit. This code is often caused by a faulty inverter with converter assembly, hybrid vehicle generator assembly, hybrid vehicle motor assembly, or a problem with the wire harness or connector. To fix it, start by visually inspecting the wiring harness and connectors. Look for any damaged components and check for broken, bent, pushed out, or corroded connector pins. Don’t forget to check the possible causes mentioned above.

How can I visually inspect the wiring harness and connectors to fix the fault code p0c64?

To fix fault code P0C64, start by visually inspecting the wiring harness and connectors. Look for any damaged components and check if there are any broken, bent, pushed out, or corroded pins in the connectors. This can help identify any issues with the inverter, converter assembly, hybrid vehicle generator assembly, hybrid vehicle motor assembly, or the wire harness itself. Take note of any findings and proceed with the necessary repairs or replacements.

What should I look for when checking for damaged components or corroded connector pins to resolve the fault code p0c64?

When dealing with the fault code p0c64, it’s important to address the symptoms and causes effectively. If you notice the engine light or service engine soon warning light is on, the possible causes could be a faulty inverter with converter assembly, hybrid vehicle generator assembly, motor assembly, or a wire harness or connector issue. To resolve this, visually inspect the wiring harness and connectors, paying close attention to damaged components and looking for broken, bent, pushed out, or corroded connector pins. This thorough check will help identify and resolve the issue.

p0c64 error fault code explained

If you’re seeing the Engine Light ON or the Service Engine Soon Warning Light, it could be due to a faulty Inverter with converter assembly, Hybrid vehicle generator assembly, Hybrid vehicle motor assembly, or a wire harness or connector issue. To fix it, visually inspect the wiring harness and connectors for any damage, broken or bent pins, or corrosion.

Scroll to Top