The automobile fault code P0C60 indicates a problem with the hybrid vehicle motor.

The most common symptom is the engine light being ON or the service engine soon warning light.

The cause of this fault code can be a faulty hybrid vehicle motor, an open or shorted motor harness, a poor electrical connection in the motor circuit, or a faulty HV control ECU. It is important to address this issue promptly as it can affect the performance and efficiency of the vehicle. The repair process involves visually inspecting the wiring harness and connectors, checking for damaged components, and looking for any broken, bent, pushed out, or corroded connector pins.

The repair time for this issue is estimated to be around 1.0 hour.

To interpret the fault code, it is recommended to check the “Possible Causes” listed above and perform the necessary inspections and repairs accordingly.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

When the engine light is on or the service engine soon warning light is illuminated, it could be a sign of the p0c60 fault code.

  • The symptoms of the automobile fault code p0c60 include the Engine Light being ON or the Service Engine Soon Warning Light being illuminated.

The fault code p0c60 can be caused by a faulty hybrid vehicle motor, an open or shorted motor harness, a poor electrical connection in the motor circuit, or a faulty HV control ECU.

  • The fault code P0C60 can be caused by the following: a faulty hybrid vehicle motor, an open or shorted hybrid vehicle motor harness, a poor electrical connection in the hybrid vehicle motor circuit, and a faulty HV control ECU.

To fix the automobile fault code p0c60, start by visually inspecting the wiring harness, connectors, and components for any damage or corrosion.

  • To fix the automobile fault code p0c60, first, check the possible causes mentioned above.
  • Then, visually inspect the wiring harness and connectors related to the issue.
  • Look for any damaged components and check for broken, bent, pushed out, or corroded pins in the connectors.
  • This fix is estimated to take approximately 1.0 hour.

The factors influencing the cost of diagnosing and fixing the automobile fault code p0c60 are the estimated repair time and the hourly rate charged by auto repair shops. The estimated repair time for this fault code is 1.0 hour. Auto repair shops typically charge between $75 and $150 per hour for their services.

These factors will determine the overall cost of diagnosing and fixing the p0c60 fault code.

The P0C60 fault code refers to the Drive Motor ‘B’ Position Sensor Circuit ‘B’ RangePerformance. This code indicates an issue with the position sensor in the drive motor. The motor resolver is a sensor that detects the position of the magnetic poles in the MG1 and MG2 motors.

It consists of a stator with an excitation coil and two detection coils.

The rotor, which has an oval shape, causes the gap between the stator and rotor to change as it turns.

The HV control ECU uses the detection coils to determine the absolute position of the rotor and calculate the amount of change in position over time.

This information is crucial for efficient control of the drive motor.

If the position sensor circuit is not performing within the expected range, the P0C60 fault code will be triggered.

What are the possible causes for the automobile fault code p0c60?

If you see the engine light on or the service engine soon warning light, the fault code P0C60 could be the culprit. This code is often caused by a faulty hybrid vehicle motor, an open or shorted hybrid vehicle motor harness, a poor electrical connection in the hybrid vehicle motor circuit, or a faulty HV control ECU. To fix this issue, start by visually inspecting the wiring harness and connectors. Look for any damaged components and check for broken, bent, pushed out, or corroded connector pins. Don’t forget to check the possible causes mentioned above.

How can I visually inspect the wiring harness and connectors to fix the fault code p0c60?

To fix fault code P0C60, start by visually inspecting the wiring harness and connectors. Look for any damaged components and check if there are any broken, bent, pushed out, or corroded pins in the connectors. This can help identify if the issue lies with a faulty hybrid vehicle motor, an open or shorted harness, a poor electrical connection in the motor circuit, or a faulty HV control ECU. Take a close look and address any issues found to resolve the problem.

What should I look for when checking for damaged components and connector’s pins to resolve the fault code p0c60?

When troubleshooting the fault code P0C60, start by visually inspecting the wiring harness and connectors. Look for any signs of damage, such as broken, bent, pushed out, or corroded connector pins. These issues can cause a poor electrical connection or an open/short circuit in the hybrid vehicle motor system. By checking for damaged components and inspecting the connector’s pins, you can identify and resolve the underlying cause of the fault code.

p0c60 error fault code explained

If you’re seeing the Engine Light ON or the Service Engine Soon Warning Light, it could be due to a faulty Hybrid vehicle motor, an open or shorted motor harness, a poor electrical connection in the motor circuit, or a faulty HV control ECU.

To fix it, visually inspect the wiring harness and connectors, check for damaged components, and look for any broken, bent, pushed out, or corroded connector pins.

Scroll to Top