If you see the engine light on or the service engine soon warning light, it could be due to the automobile fault code P0C4F.

This code indicates a problem with the hybrid vehicle motor. The possible causes include a faulty hybrid vehicle motor, an open or shorted motor harness, a poor electrical connection in the motor circuit, or a faulty HV control ECU. To fix this issue, you should visually inspect the wiring harness and connectors for any damage.

Look out for broken, bent, pushed out, or corroded pins in the connectors. The repair time for this fault code is estimated to be around 1.0.

It’s important to address this issue promptly to ensure the proper functioning of your vehicle.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

When the engine light is on or the service engine soon warning light is illuminated, it could indicate the presence of fault code p0c4f.

  • The symptoms of the automobile fault code p0c4f include: Engine Light ON (or Service Engine Soon Warning Light).

The fault code p0c4f can be caused by a faulty hybrid vehicle motor, an open or shorted motor harness, a poor electrical connection in the motor circuit, or a faulty HV control ECU.

  • The fault code p0c4f can be caused by the following: a faulty hybrid vehicle motor, an open or shorted hybrid vehicle motor harness, a poor electrical connection in the hybrid vehicle motor circuit, and a faulty HV control ECU.

To fix the automobile fault code p0c4f, start by visually inspecting the wiring harness, connectors, and components for any damage or corrosion.

  • To fix the automobile fault code p0c4f, start by checking the possible causes mentioned above.
  • Then, visually inspect the wiring harness and connectors related to the issue.
  • Look for any damaged components and check for broken, bent, pushed out, or corroded pins on the connectors.
  • This fix is estimated to take approximately 1.0 hour.

The automobile fault code p0c4f diagnosis and fixing cost is influenced by the estimated repair time of 1.0 hour. Auto repair shops typically charge between $75 and $150 per hour for their services.

The P0C4F fault code indicates that the drive motor ‘B’ has exceeded its learning limit.

This fault code is related to the motor resolver, which is a sensor that detects the position of the magnetic poles in order to control the MG1 and MG2 efficiently. The resolver consists of a stator with an excitation coil and two detection coils, and a rotor with an oval shape. As the rotor turns, the gap between the stator and the rotor changes. The detection coils output alternating currents based on the position of the rotor. The HV control ECU uses the detection coils to determine the absolute position of the rotor and calculate the amount of change in position over time.

In the case of the P0C4F code, the drive motor ‘B’ has exceeded the learning limit, indicating a potential issue with the motor’s position control.

What are the possible causes for the automobile fault code p0c4f?

If you see the engine light or service engine soon warning light on, the fault code P0C4F could be the culprit. This code is often caused by a faulty hybrid vehicle motor, an open or shorted hybrid vehicle motor harness, a poor electrical connection in the hybrid vehicle motor circuit, or a faulty HV control ECU. To fix this issue, start by visually inspecting the wiring harness and connectors. Look for any damaged components and check for broken, bent, pushed out, or corroded connector pins. Don’t forget to check the possible causes mentioned above.

How can I visually inspect the wiring harness and connectors to fix the fault code p0c4f?

If you’re dealing with the fault code p0c4f and your engine light is on, it’s time to visually inspect the wiring harness and connectors. This could be caused by a faulty hybrid vehicle motor, an open or shorted harness, a poor electrical connection in the motor circuit, or a faulty HV control ECU. To fix it, check the possible causes mentioned earlier and give the wiring harness and connectors a thorough visual inspection. Look out for any damaged components and check for broken, bent, pushed out, or corroded pins in the connectors.

What should I look for when checking for damaged components or corroded connector pins to resolve the fault code p0c4f?

When resolving the fault code p0c4f, start by checking for damaged components or corroded connector pins. This can be done by visually inspecting the related wiring harness and connectors. Look for any broken, bent, pushed out, or corroded pins. By doing so, you can identify any faults in the hybrid vehicle motor or its circuit connections. This will help you fix the issue and turn off the engine light or service engine soon warning light.

p0c4f error fault code explained

If you’re seeing the Engine Light ON or the Service Engine Soon Warning Light, it could be due to a faulty Hybrid vehicle motor, an open or shorted motor harness, a poor electrical connection in the motor circuit, or a faulty HV control ECU. To fix it, visually inspect the wiring harness and connectors, check for damaged components, and look for any broken, bent, pushed out, or corroded connector pins.

Scroll to Top