The automobile fault code P0C35 indicates a problem with the HybridEV Battery Assembly. The most common symptom is the Engine Light being ON or the Service Engine Soon Warning Light.

The cause of this fault code can be a faulty HybridEV Battery Assembly, an open or shorted harness, a poor electrical connection in the circuit, or a faulty HybridEV Battery Interface Control Module. To fix this issue, you should visually inspect the wiring harness and connectors for any damage.

Look for broken, bent, pushed out, or corroded pins in the connectors.

The repair time for this issue is estimated to be around 1.0.

It is important to address this problem promptly to avoid further damage to the vehicle’s hybrid or electric system.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

When the engine light is on or the service engine soon warning light is illuminated, it could be a sign of the p0c35 fault code.

  • The symptoms of the automobile fault code p0c35 include the Engine Light being ON or the Service Engine Soon Warning Light being illuminated.

The automobile fault code p0c35 can be caused by a faulty HybridEV Battery Assembly, an open or shorted HybridEV Battery Assembly harness, a poor electrical connection in the HybridEV Battery Assembly circuit, or a faulty HybridEV Battery Interface Control Module.

  • The fault code P0C35 can be caused by a faulty Hybrid/EV Battery Assembly, an open or shorted Hybrid/EV Battery Assembly harness, a poor electrical connection in the Hybrid/EV Battery Assembly circuit, or a faulty Hybrid/EV Battery Interface Control Module.

To fix the automobile fault code p0c35, start by visually inspecting the wiring harness, connectors, and components for any damage or corrosion.

  • To fix the automobile fault code p0c35, start by checking the possible causes mentioned above.
  • Then, visually inspect the wiring harness and connectors for any damage.
  • Look for broken, bent, pushed out, or corroded pins on the connectors.
  • This fix should take approximately 1.0 hour.

The factors influencing the cost of diagnosing and fixing the automobile fault code p0c35 are the estimated repair time and the hourly rate charged by auto repair shops. The estimated repair time for this fault code is 1.0 hour.

Auto repair shops typically charge between $75 and $150 per hour for their services. These factors will determine the overall cost of diagnosing and fixing the p0c35 fault code.

The P0C35 fault code refers to a problem with the HybridEV Battery Temperature Sensor 6 Circuit.

This sensor is responsible for monitoring the temperature of the battery in hybrid or electric vehicles.

It is located within the battery sections and there are two temperature sensors in each section. The sensor works by measuring the resistance of the battery cell group, which changes with temperature. As the temperature decreases, the sensor resistance increases, and as the temperature increases, the sensor resistance decreases. The HybridEV Interface Control Module supplies 5V to the signal circuit and acts as a ground for the low reference circuit. It communicates the temperature sensor values to the HybridEV Powertrain Control Module via serial data. When the hybrid battery temperature sensor exceeds 160°C (320°F), the Diagnostic Trouble Code (DTC) P0C35 is set.

This code indicates a low voltage issue with the HybridEV Battery Temperature Sensor 6 Circuit. It is important to address this issue promptly to ensure proper operation of the battery cooling system.

What are the possible causes for the automobile fault code p0c35?

If you see the engine light on or the service engine soon warning light, the fault code P0C35 could be the culprit. This code is often caused by a faulty hybrid/EV battery assembly, an open or shorted harness, a poor electrical connection in the hybrid/EV battery assembly circuit, or a faulty hybrid/EV battery interface control module. To fix this issue, visually inspect the wiring harness and connectors, checking for any damage or broken, bent, pushed out, or corroded pins. Don’t forget to consider the possible causes mentioned above.

How can I visually inspect the wiring harness and connectors to fix the fault code p0c35?

If you’re dealing with the fault code p0c35 and your engine light is on, it’s time to take action. The cause could be a faulty Hybrid/EV Battery Assembly or a poor electrical connection in the Hybrid/EV Battery Assembly circuit. To fix this issue, start by visually inspecting the wiring harness and connectors. Look for any signs of damage, such as broken or bent pins, corrosion, or components that are out of place. This simple step can help you identify and resolve the problem. Don’t delay, get to the bottom of it now!

What should I look for when checking for damaged components and connector’s pins to resolve the fault code p0c35?

If you’re dealing with the fault code p0c35 and your engine light is on, it’s important to check for damaged components and connector’s pins. This code is often caused by a faulty Hybrid/EV Battery Assembly or issues with the wiring harness and connectors. To resolve the issue, visually inspect the wiring harness and connectors, paying close attention to any signs of damage. Look for broken, bent, pushed out, or corroded connector’s pins. By identifying and addressing these issues, you can effectively fix the fault code p0c35.

p0c35 error fault code explained

If you’re seeing the Engine Light ON or the Service Engine Soon Warning Light, it could be due to a faulty HybridEV Battery Assembly or issues with the wiring harness and connectors.

To fix it, visually inspect the wiring and connectors for any damage, and check for broken or corroded pins.

Scroll to Top