The automobile fault code P0C2D indicates a problem with the Electronic Transmission Fluid Auxiliary Pump.

The most common symptom is the Engine Light being ON or the Service Engine Soon Warning Light. This fault code can be caused by a faulty pump, an open or shorted harness, or poor electrical connections in the pump circuit.

To fix this issue, it is recommended to visually inspect the wiring harness and connectors for any damage. Check for broken, bent, pushed out, or corroded pins in the connectors.

The repair time for this issue is estimated to be around 1.0 hour. To interpret the fault code, it is important to check the “Possible Causes” listed above and perform the necessary inspections and repairs.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

When the engine light is on or the service engine soon warning light is illuminated, it could be a sign of the p0c2d fault code.

  • The symptoms of the automobile fault code p0c2d include the Engine Light being ON or the Service Engine Soon Warning Light being illuminated.

The fault code p0c2d can be caused by a faulty electronic transmission fluid auxiliary pump, an open or shorted harness, or a poor electrical connection in the pump circuit.

  • The fault code p0c2d can be caused by the following: a faulty Electronic Transmission Fluid Auxiliary Pump, an open or shorted harness for the Electronic Transmission Fluid Auxiliary Pump, and a poor electrical connection in the Electronic Transmission Fluid Auxiliary Pump circuit.

To fix the p0c2d fault code, start by visually inspecting the wiring harness, connectors, and components for any damage or corrosion.

  • To fix the automobile fault code p0c2d, you need to first check the possible causes mentioned above.
  • Then, visually inspect the wiring harness and connectors related to the issue.
  • Look for any damaged components and check if there are any broken, bent, pushed out, or corroded pins in the connectors.
  • This fix should take approximately 1.0 hour.

The factors influencing the cost of diagnosing and fixing the automobile fault code p0c2d are the estimated repair time and the hourly rate charged by auto repair shops. The estimated repair time for this fault code is 1.0 hour.

Auto repair shops typically charge between $75 and $150 per hour for their services.

These factors will determine the overall cost of diagnosing and fixing the p0c2d fault code.

The P0C2D fault code refers to a problem with the Electric Transmission Fluid Pump Control Module Feedback Signal. This signal is monitored by the Transmission Control Module (TCM) in order to ensure that the transmission remains engaged when the engine is off and the transmission is in drive. When the signal from the control module is lower than the specified factory range, the TCM sets the P0C2D fault code.

This indicates that there is an issue with the control circuit of the electric transmission fluid pump.

It is important to address this issue promptly to ensure proper functioning of the transmission.

What are the possible causes for the automobile fault code p0c2d?

If you see the engine light or service engine soon warning light on, the fault code P0C2D could be the culprit. This code is often caused by a faulty electronic transmission fluid auxiliary pump or issues with the pump’s harness. To fix the problem, visually inspect the wiring harness and connectors, checking for any damage or corrosion. Look out for broken, bent, pushed out, or corroded pins on the connectors. Don’t forget to consider the possible causes mentioned above.

How can I visually inspect the wiring harness and connectors to fix the fault code p0c2d?

If you’re dealing with the fault code p0c2d and your engine light is on, it’s time to visually inspect the wiring harness and connectors. This could be caused by a faulty electronic transmission fluid auxiliary pump or an open or shorted harness. To fix it, check for damaged components and look for any broken, bent, pushed out, or corroded pins in the connectors. Don’t forget to also check the “Possible Causes” listed above.

What should I look for when checking for damaged components and connector’s pins to resolve the fault code p0c2d?

If you’re dealing with the fault code p0c2d and your engine light is on, it’s time to roll up your sleeves and get to work. The culprit could be a faulty Electronic Transmission Fluid Auxiliary Pump or issues with the pump’s harness and electrical connection. To resolve this, start by visually inspecting the wiring harness and connectors. Look out for any damaged components and check for broken, bent, pushed out, or corroded connector’s pins. Don’t forget to address the possible causes mentioned earlier.

p0c2d error fault code explained

If your engine light is on or you see the service engine soon warning light, it could be due to a faulty electronic transmission fluid auxiliary pump or issues with the pump’s harness and electrical connection. To fix it, visually inspect the wiring harness and connectors, checking for any damage or corrosion. Look out for broken or bent pins on the connectors.

Scroll to Top