The automobile fault code P0C2C indicates a problem with the Electronic Transmission Fluid Auxiliary Pump. The most common symptom is the Engine Light being ON or the Service Engine Soon Warning Light. The cause of this fault code can be a faulty pump, an open or shorted harness, or a poor electrical connection in the pump circuit.

To fix this issue, you should visually inspect the wiring harness and connectors for any damage. Look for broken, bent, pushed out, or corroded pins in the connectors. The repair time for this problem is estimated to be around 1.0 hour.

It is important to address this issue promptly to prevent further damage to the transmission system.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

When the p0c2c fault code appears, you may notice the Engine Light ON or the Service Engine Soon Warning Light illuminated.

  • The symptoms of the automobile fault code p0c2c include the Engine Light being ON or the Service Engine Soon Warning Light being illuminated.

The automobile fault code p0c2c can be caused by a faulty electronic transmission fluid auxiliary pump, an open or shorted harness, or a poor electrical connection in the pump circuit.

  • The fault code p0c2c can be caused by: – Faulty Electronic Transmission Fluid Auxiliary Pump – Open or shorted harness of the Electronic Transmission Fluid Auxiliary Pump – Poor electrical connection in the Electronic Transmission Fluid Auxiliary Pump circuit.

To fix the automobile fault code p0c2c, start by visually inspecting the wiring harness, connectors, and components for any damage or corrosion.

  • To fix the automobile fault code p0c2c, you need to first check the possible causes mentioned above.
  • Then, visually inspect the wiring harness and connectors related to the issue.
  • Look for any damaged components and check for broken, bent, pushed out, or corroded connector pins.
  • This fix is estimated to take approximately 1.0 hour.

The factors influencing the cost of diagnosing and fixing the automobile fault code p0c2c based on the estimated repair time of 1.0 hour include the hourly rate charged by auto repair shops, which typically ranges between $75 and $150.

The P0C2C fault code refers to an issue with the Electric Transmission Fluid Pump Control Module Feedback Signal RangePerformance. This code is set by the Transmission Control Module (TCM) when it detects that the signal from the Electric Transmission Fluid Auxiliary Pump Control Circuit is not within the specified range. The Electric Transmission Fluid Auxiliary Pump is responsible for keeping the transmission engaged when the engine is stopped and the transmission is in drive.

It ensures smooth operation and prevents any potential damage.

However, if the TCM detects that the signal from the control circuit is not within the expected range, it triggers the P0C2C fault code. When this fault code is present, it indicates that there may be an issue with the Electric Transmission Fluid Pump Control Module Feedback Signal.

It is important to address this issue promptly to ensure proper functioning of the transmission and avoid any potential damage.

A qualified technician should diagnose and repair the underlying cause of this fault code.

What are the possible causes for the automobile fault code P0C2C?

If you see the engine light or service engine soon warning light on, the fault code P0C2C could be the culprit. This code is often caused by a faulty electronic transmission fluid auxiliary pump or issues with the pump’s harness. To fix the problem, visually inspect the wiring harness and connectors, checking for any damage or corrosion. Look out for broken, bent, pushed out, or corroded pins on the connectors as well. It’s important to address these possible causes to resolve the issue.

How can I visually inspect the wiring harness and connectors to fix the P0C2C fault code?

If you’re dealing with the P0C2C fault code and your engine light is on, it’s time to take a closer look at the wiring harness and connectors. The possible causes include a faulty electronic transmission fluid auxiliary pump, an open or shorted harness, or a poor electrical connection. To fix the issue, visually inspect the wiring harness and connectors for any signs of damage. Check for broken, bent, pushed out, or corroded pins on the connectors. Don’t forget to examine the components as well.

What should I look for when checking for damaged components and connector’s pins to resolve the P0C2C fault code?

When resolving the P0C2C fault code, start by checking for damaged components and connector’s pins. This can be done by visually inspecting the related wiring harness and connectors. Look for any signs of damage such as broken, bent, pushed out, or corroded pins. By doing this, you can identify any issues with the Electronic Transmission Fluid Auxiliary Pump or its harness, which may be causing the engine light to turn on.

p0c2c error fault code explained

If your engine light is on or you see the service engine soon warning light, it could be due to a faulty electronic transmission fluid auxiliary pump or issues with the pump’s harness.

To fix this, visually inspect the wiring harness and connectors, checking for any damage or corrosion.

Look out for broken or bent pins as well.

Scroll to Top