The automobile fault code P0C2A indicates a problem with the Electronic Transmission Fluid Auxiliary Pump.

The most common symptom is the Engine Light being ON or the Service Engine Soon Warning Light. The cause of this fault code can be a faulty pump, an open or shorted harness, or a poor electrical connection in the pump circuit. To fix this issue, you should visually inspect the wiring harness and connectors for any damage.

Look for broken, bent, pushed out, or corroded pins in the connectors. The repair time for this problem is estimated to be around 1.0 hour. It is important to address this issue promptly to prevent further damage to the transmission system.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

When the engine light is on or the service engine soon warning light is illuminated, it could be a sign of the p0c2a fault code.

  • The symptoms of the automobile fault code p0c2a include the Engine Light being ON or the Service Engine Soon Warning Light being illuminated.

The fault code p0c2a can be caused by a faulty electronic transmission fluid auxiliary pump, an open or shorted harness, or a poor electrical connection in the pump circuit.

  • The fault code p0c2a can be caused by: – Faulty Electronic Transmission Fluid Auxiliary Pump – Open or shorted harness of the Electronic Transmission Fluid Auxiliary Pump – Poor electrical connection in the Electronic Transmission Fluid Auxiliary Pump circuit.

To fix the automobile fault code p0c2a, start by visually inspecting the wiring harness, connectors, and components for any damage or corrosion.

  • To fix the automobile fault code p0c2a, start by checking the possible causes mentioned above.
  • Then, visually inspect the wiring harness and connectors related to the issue.
  • Look for any damaged components and check for broken, bent, pushed out, or corroded connector pins.
  • This fix is estimated to take approximately 1.0 hour.

The automobile fault code P0C2A has an estimated repair time of 1.0 hour. Auto repair shops typically charge between $75 and $150 per hour for their services.

The P0C2A fault code refers to an issue with the Electric Transmission Fluid Pump Motor. This motor is responsible for keeping the transmission engaged when the engine is stopped and the transmission is in drive.

The Transmission Control Module (TCM) monitors the control circuit of this pump. If the signal from the control circuit is not within the factory specifications, the TCM will set the P0C2A code.

This code indicates that the motor of the electric transmission fluid pump has stalled.

What are the possible causes for the automobile fault code p0c2a and how can I visually inspect them?

If you’re seeing the engine light or service engine soon warning light and the fault code is p0c2a, there are a few possible causes to consider. It could be a faulty electronic transmission fluid auxiliary pump, an open or shorted harness for the pump, or a poor electrical connection in the pump circuit. To visually inspect these potential issues, check the wiring harness and connectors related to the pump. Look for any signs of damage, such as broken or bent components, pushed out pins, or corrosion. This will help you identify and address the problem effectively.

How does a faulty Electronic Transmission Fluid Auxiliary Pump contribute to the engine light being ON and what steps can I take to fix it?

If you notice that your engine light is ON or you see a Service Engine Soon Warning Light, it could be due to a faulty Electronic Transmission Fluid Auxiliary Pump. This can happen if the pump harness is open or shorted, or if there is a poor electrical connection in the pump circuit. To fix this issue, you should check the possible causes mentioned above. Take a close look at the wiring harness and connectors, and inspect for any damage or corrosion. Also, check if any components are broken, bent, pushed out, or have corroded connector pins.

What should I look for when inspecting the wiring harness and connectors related to the Electronic Transmission Fluid Auxiliary Pump circuit to resolve the fault code p0c2a?

When dealing with fault code P0C2A related to the Electronic Transmission Fluid Auxiliary Pump circuit, it’s important to inspect the wiring harness and connectors. Start by visually examining the harness and connectors for any signs of damage. Look out for broken, bent, pushed out, or corroded pins in the connectors. These issues can cause poor electrical connections and lead to the engine light being on. By checking and addressing these possible causes, you can resolve the fault code and ensure smooth operation of the auxiliary pump circuit.

p0c2a error fault code explained

If your engine light is on, it could be due to a faulty Electronic Transmission Fluid Auxiliary Pump or issues with the pump’s harness and electrical connection.

To fix it, visually inspect the wiring harness and connectors, checking for any damage or corrosion. Look out for broken or bent pins as well.

Scroll to Top