The automobile fault code P0C29 indicates a problem with the Electronic Transmission Fluid Auxiliary Pump.
This can be identified by the Engine Light or Service Engine Soon Warning Light turning on. The cause of this fault code could be a faulty pump, an open or shorted harness, or a poor electrical connection in the pump circuit. To fix this issue, it is recommended to visually inspect the wiring harness and connectors for any damage.
Check for broken, bent, pushed out, or corroded pins in the connectors.
The repair time for this issue is estimated to be around 1.0 hour.
To interpret the fault code, it is important to check the “Possible Causes” listed above and perform the necessary inspections and repairs.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 10.0 (Out of 10) |
Decode The Symptoms: Unveiling The Mystery Of Code P0C29
When the engine light is on or the service engine soon warning light is illuminated, it could be a sign of the p0c29 fault code.
- The symptoms of the automobile fault code p0c29 include the Engine Light being ON or the Service Engine Soon Warning Light being illuminated.
Unraveling The Mystery: What Causes Fault Code P0C29?
The automobile fault code p0c29 can be caused by a faulty electronic transmission fluid auxiliary pump, an open or shorted harness, or a poor electrical connection in the pump circuit.
- The fault code p0c29 can be caused by: – Faulty Electronic Transmission Fluid Auxiliary Pump – Open or shorted harness of the Electronic Transmission Fluid Auxiliary Pump – Poor electrical connection in the Electronic Transmission Fluid Auxiliary Pump circuit.
Fixing Code P0C29: Simple Steps To Resolve The Issue
To fix the automobile fault code p0c29, start by visually inspecting the wiring harness, connectors, and components for any damage or corrosion.
- To fix the automobile fault code p0c29, start by checking the possible causes mentioned above.
- Then, visually inspect the wiring harness and connectors related to the issue.
- Look for any damaged components and check for broken, bent, pushed out, or corroded connector pins.
- This fix is estimated to take approximately 1.0 hour.
Cracking The Code: P0C29 – Cost And Complexity Unveiled!
The factors influencing the cost of diagnosing and fixing the automobile fault code p0c29 are the estimated repair time and the hourly rate charged by auto repair shops. The estimated repair time for this fault code is 1.0 hour. Auto repair shops typically charge between $75 and $150 per hour for their services.
These factors will determine the overall cost of diagnosing and fixing the p0c29 fault code.
P0C29: Understanding The Fault Code For Hybrid/Electric Vehicle Battery Cooling System
The P0C29 fault code refers to the Electric Transmission Fluid Pump Motor Current being too high. This code is related to the Electronic Transmission Fluid Auxiliary Pump, which is responsible for keeping the transmission engaged when the engine is stopped and the transmission is in drive. The Transmission Control Module (TCM) monitors the control circuit of this pump.
If the signal from the control circuit is outside of the factory specifications, the TCM will set the P0C29 code. This code indicates that the current flowing through the motor of the transmission fluid pump is higher than it should be.
FAQ
If you see the engine light or service engine soon warning light on, the fault code P0C29 could be the culprit. This code is often caused by a faulty electronic transmission fluid auxiliary pump or issues with the pump’s harness. To fix the problem, visually inspect the wiring harness and connectors, checking for any damage or corrosion. Look out for broken, bent, pushed out, or corroded pins on the connectors. Taking these steps can help you identify and resolve the issue.
If you’re dealing with the fault code p0c29 and your engine light is on, it’s time to visually inspect the wiring harness and connectors. This could be caused by a faulty electronic transmission fluid auxiliary pump or an open or shorted harness. To fix it, check for damaged components and look for any broken, bent, pushed out, or corroded pins on the connectors. Don’t forget to also check the “Possible Causes” listed above.
When dealing with the fault code p0c29, it’s important to address the issue of damaged components and connector’s pins. Start by visually inspecting the wiring harness and connectors, checking for any signs of damage. Look out for broken, bent, pushed out, or corroded pins on the connectors. These issues can often be the cause of the fault code. By thoroughly examining these areas, you can identify and resolve any problems, ensuring a smooth-running engine and avoiding further complications.
Wrap Up
If your engine light is on and you’re getting the P0C29 fault code, it could be due to a faulty electronic transmission fluid auxiliary pump or issues with the pump’s harness.
To fix it, visually inspect the wiring harness and connectors, checking for any damage or corrosion.
Look out for broken or bent pins as well.
