The automobile fault code P0C28 indicates a problem with the Electronic Transmission Fluid Auxiliary Pump. This can be identified by the Engine Light being ON or the Service Engine Soon Warning Light.
The cause of this fault code could be a faulty pump, an open or shorted harness, or a poor electrical connection in the pump circuit.
To fix this issue, it is recommended to visually inspect the wiring harness and connectors for any damage. Look out for broken, bent, pushed out, or corroded pins in the connectors. The repair time for this fault code is estimated to be 1.0.
To interpret the fault code, check the “Possible Causes” mentioned above and follow the suggested steps for inspection and repair.
Repair Importance Level | 10.0 (Out of 10) |
Estimated Repair Time | Approximately 1.0 hour |
Repair Difficulty Level | 10.0 (Out of 10) |
Decode The Symptoms: Unveiling The Mystery Of Code P0C28
When the engine light is on or the service engine soon warning light is illuminated, it could be a sign of the p0c28 fault code.
- The symptoms of the automobile fault code p0c28 include the Engine Light being ON or the Service Engine Soon Warning Light being illuminated.
Unraveling The Mystery: What Causes Fault Code P0C28?
The automobile fault code p0c28 can be caused by a faulty electronic transmission fluid auxiliary pump, an open or shorted harness, or a poor electrical connection in the pump circuit.
- The fault code p0c28 can be caused by: – Faulty Electronic Transmission Fluid Auxiliary Pump – Open or shorted harness of the Electronic Transmission Fluid Auxiliary Pump – Poor electrical connection in the Electronic Transmission Fluid Auxiliary Pump circuit.
Fixing Code P0C28: Simple Steps To Resolve The Issue
To fix the automobile fault code p0c28, start by visually inspecting the wiring harness, connectors, and components for any damage or corrosion.
- To fix the automobile fault code p0c28, you need to check the possible causes mentioned above.
- Inspect the wiring harness and connectors visually.
- Look for any damaged components and check for broken, bent, pushed out, or corroded connector pins.
- The estimated repair time for this fix is 1.0 hour.
Cracking The Code: P0C28 – Cost And Complexity Unveiled!
The factors influencing the cost of diagnosing and fixing the automobile fault code p0c28 are the estimated repair time of 1.0 hour and the typical auto repair shop charges between $75 and $150 per hour.
P0C28 Fault Code: Understanding The Description And Troubleshooting Steps
The P0C28 fault code refers to the Electric Transmission Fluid Pump Motor Current being low. This code is related to the Electronic Transmission Fluid Auxiliary Pump, which is responsible for keeping the transmission engaged when the engine is stopped and the transmission is in drive.
The Transmission Control Module (TCM) monitors the control circuit of this pump. If the signal from the control circuit is not within the factory specifications, the TCM will set the P0C28 code.
This code indicates that the current flowing through the motor of the electric transmission fluid pump is lower than it should be.
FAQ
If you see the engine light or service engine soon warning light on, the fault code P0C28 could be the culprit. This code is often caused by a faulty electronic transmission fluid auxiliary pump or issues with the pump’s harness. To fix the problem, visually inspect the wiring harness and connectors, checking for any damage or corrosion. Look out for broken, bent, pushed out, or corroded pins on the connectors. Don’t forget to consider the possible causes mentioned above.
If you’re dealing with the fault code p0c28 and your engine light is on, it’s time to visually inspect the wiring harness and connectors. This could be caused by a faulty electronic transmission fluid auxiliary pump or an open or shorted harness. To fix it, check for damaged components and look for any broken, bent, pushed out, or corroded pins on the connectors. Don’t forget to also check the “Possible Causes” listed above.
To resolve the fault code p0c28, start by visually inspecting the wiring harness and connectors. Look for any damaged components and check for broken, bent, pushed out, or corroded connector’s pins. These issues can cause a poor electrical connection or an open or shorted circuit in the Electronic Transmission Fluid Auxiliary Pump. By checking and addressing these possible causes, you can fix the problem and turn off the Engine Light or Service Engine Soon Warning Light.
![p0c28 error fault code explained](https://carmodnerd.com/wp-content/uploads/2023/07/P0C28-error-fault-code.jpg)
Wrap Up
If your engine light is on and you’re getting the P0C28 fault code, it could be due to a faulty electronic transmission fluid auxiliary pump or issues with the pump’s harness. To fix it, visually inspect the wiring harness and connectors for any damage or poor connections. Look out for broken, bent, pushed out, or corroded pins on the connectors.