The automobile fault code P0C1F indicates a problem with the Auxiliary Transmission Fluid Pump Control Module. This can be identified by the Engine Light or Service Engine Soon Warning Light being illuminated.

The cause of this fault code could be a faulty module, an open or shorted harness, or a poor electrical connection. To fix this issue, it is recommended to visually inspect the wiring harness and connectors for any damage. Additionally, check for broken, bent, pushed out, or corroded pins on the connectors.

The repair time for this problem is estimated to be around 1.0 hour. It is important to address this issue promptly to prevent further damage to the vehicle.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

When the engine light is on or the service engine soon warning light is illuminated, it could be a sign of the p0c1f fault code.

  • The symptoms of the automobile fault code p0c1f include the Engine Light being ON or the Service Engine Soon Warning Light being illuminated.

The automobile fault code p0c1f can be caused by a faulty Auxiliary Transmission Fluid Pump Control Module, an open or shorted harness, or a poor electrical connection in the module circuit.

  • The fault code p0c1f can be caused by the following: a faulty Auxiliary Transmission Fluid Pump Control Module, an open or shorted harness for the Auxiliary Transmission Fluid Pump Control Module, and a poor electrical connection in the Auxiliary Transmission Fluid Pump Control Module circuit.

To fix the automobile fault code p0c1f, start by visually inspecting the wiring harness, connectors, and components for any damage or corrosion.

  • To fix the automobile fault code p0c1f, start by checking the possible causes mentioned above.
  • Then, visually inspect the wiring harness and connectors related to the issue.
  • Look for any damaged components and check for broken, bent, pushed out, or corroded connector pins.
  • This fix is estimated to take approximately 1.0 hour.

The automobile fault code p0c1f has an estimated repair time of 1.0 hour.

The cost of fixing this fault code can vary depending on the auto repair shop, but it is common for them to charge between $75 and $150 per hour.

The P0C1F fault code refers to a problem with the Auxiliary Transmission Fluid Pump Control Module’s internal temperature sensor circuit. The Engine Control Module (ECM) is responsible for monitoring this module, and it triggers the OBDII code when the Auxiliary Transmission Fluid Pump Control Module does not meet the factory specifications. This fault code indicates that the internal temperature sensor circuit is reading a high temperature, suggesting a potential issue with the module’s temperature regulation.

It is important to address this problem promptly to ensure proper functioning of the transmission fluid pump and prevent any further damage.

What are the possible causes for the automobile fault code p0c1f?

If you see the engine light on or the service engine soon warning light, the fault code P0C1F could be the culprit. This code is often caused by a faulty auxiliary transmission fluid pump control module or issues with the module’s harness or electrical connections. To fix the problem, visually inspect the wiring harness and connectors, checking for any damage or corrosion. Additionally, look out for broken, bent, pushed out, or corroded pins on the connectors.

How can I visually inspect the wiring harness and connectors to fix the fault code p0c1f?

If you’re dealing with the fault code p0c1f and your engine light is on, it’s time to take a closer look at the wiring harness and connectors. The most likely cause of this issue is a faulty Auxiliary Transmission Fluid Pump Control Module or a problem with the harness itself. To fix it, visually inspect the wiring harness and connectors for any signs of damage or poor electrical connections. Keep an eye out for broken, bent, pushed out, or corroded pins on the connectors. Don’t forget to check for any damaged components as well.

What should I look for when checking for damaged components and connector’s pins to resolve the fault code p0c1f?

To resolve the fault code p0c1f, start by visually inspecting the wiring harness and connectors. Look for any damaged components and check for broken, bent, pushed out, or corroded connector’s pins. These issues can cause a poor electrical connection or an open or shorted circuit in the Auxiliary Transmission Fluid Pump Control Module. By checking and addressing these possible causes, you can fix the problem and turn off the Engine Light or Service Engine Soon Warning Light.

p0c1f error fault code explained

If you see the Engine Light ON or the Service Engine Soon Warning Light, it could be due to a faulty Auxiliary Transmission Fluid Pump Control Module. To fix it, visually inspect the wiring harness and connectors for any damage. Also, check for broken, bent, pushed out, or corroded connector pins.

Scroll to Top