The automobile fault code P0C1E indicates a problem with the Auxiliary Transmission Fluid Pump Control Module.

The most common symptom is the Engine Light being ON or the Service Engine Soon Warning Light. The cause of this fault code can be a faulty control module, an open or shorted harness, or a poor electrical connection. To fix this issue, it is recommended to visually inspect the wiring harness and connectors for any damage.

Check for broken, bent, pushed out, or corroded pins in the connectors. The repair time for this fault code is estimated to be around 1.0 hour.

It is important to address this issue promptly to prevent further damage to the vehicle.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

When the engine light is on or the service engine soon warning light is illuminated, it could indicate the presence of fault code p0c1e.

  • The symptoms of the automobile fault code p0c1e include the Engine Light being ON or the Service Engine Soon Warning Light being illuminated.

The automobile fault code p0c1e can be caused by a faulty Auxiliary Transmission Fluid Pump Control Module, an open or shorted harness, or a poor electrical connection in the module circuit.

  • The fault code p0c1e can be caused by: a faulty Auxiliary Transmission Fluid Pump Control Module, an open or shorted harness for the Auxiliary Transmission Fluid Pump Control Module, and a poor electrical connection in the Auxiliary Transmission Fluid Pump Control Module circuit.

To fix the automobile fault code p0c1e, start by visually inspecting the wiring harness, connectors, and components for any damage or corrosion.

  • To fix the automobile fault code p0c1e, start by checking the possible causes mentioned above.
  • Then, visually inspect the wiring harness and connectors related to the issue.
  • Look for any damaged components and check for broken, bent, pushed out, or corroded pins on the connectors.
  • This fix typically takes around 1.0 hour to complete.

The factors influencing the cost of diagnosing and fixing the automobile fault code p0c1e are the estimated repair time and the hourly rate charged by auto repair shops.

The estimated repair time for this fault code is 1.0 hour. Auto repair shops typically charge between $75 and $150 per hour for their services. These factors will determine the overall cost of diagnosing and fixing the p0c1e fault code.

The P0C1E fault code refers to a problem with the Auxiliary Transmission Fluid Pump Control Module’s internal temperature sensor circuit. The Engine Control Module (ECM) is responsible for monitoring this module, and it triggers the OBDII code when the Auxiliary Transmission Fluid Pump Control Module does not meet the factory specifications.

This fault code indicates that the internal temperature sensor circuit is reading a low temperature. When this fault code appears, it means that there may be an issue with the temperature sensor circuit within the Auxiliary Transmission Fluid Pump Control Module.

This can lead to improper functioning of the module and potentially affect the transmission fluid pump’s performance. It is important to address this issue promptly to prevent further damage to the transmission system.

A professional diagnostic and repair service should be sought to accurately diagnose and fix the problem.

What are the possible causes for the automobile fault code p0c1e?

If you’re seeing the fault code P0C1E on your automobile, it means that the engine light or service engine soon warning light is on. This could be due to a faulty auxiliary transmission fluid pump control module, an open or shorted harness for the control module, or a poor electrical connection in the control module circuit. To fix this issue, you should visually inspect the wiring harness and connectors, checking for any damage or broken, bent, pushed out, or corroded pins in the connectors.

How can I visually inspect the wiring harness and connectors to fix the fault code p0c1e?

If you’re dealing with the fault code p0c1e and your engine light is on, it’s time to visually inspect the wiring harness and connectors. This code is often caused by a faulty Auxiliary Transmission Fluid Pump Control Module or issues with the harness and electrical connections. To fix it, check for any damaged components and examine the wiring harness and connectors for any signs of damage like broken, bent, pushed out, or corroded pins. Don’t forget to address the possible causes mentioned earlier.

What should I look for when checking for damaged components and connector’s pins to resolve the fault code p0c1e?

When troubleshooting the fault code p0c1e, start by visually inspecting the wiring harness and connectors. Look for any signs of damage or corrosion. Pay close attention to the connector’s pins and check for any that are broken, bent, pushed out, or corroded. These issues can cause a poor electrical connection and lead to the engine light being on. By checking for damaged components and inspecting the connector’s pins, you can identify and resolve the underlying cause of the fault code.

p0c1e error fault code explained

If you see the Engine Light ON or the Service Engine Soon Warning Light, it could be due to a faulty Auxiliary Transmission Fluid Pump Control Module. To fix it, visually inspect the wiring harness and connectors for any damage. Also, check for broken, bent, pushed out, or corroded connector pins.

Scroll to Top