The automobile fault code P0C1D indicates a problem with the Auxiliary Transmission Fluid Pump Control Module.

This can be identified by the Engine Light or Service Engine Soon Warning Light being illuminated. The cause of this fault code could be a faulty module, an open or shorted harness, or a poor electrical connection. To fix this issue, it is recommended to visually inspect the wiring harness and connectors for any damage.

Additionally, check for broken, bent, pushed out, or corroded pins on the connectors. The repair time for this fault code is estimated to be 1.0. To interpret the fault code, it is important to check the “Possible Causes” listed above and perform the necessary inspections and repairs.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

When the p0c1d fault code appears, you may notice the Engine Light ON or the Service Engine Soon Warning Light illuminated.

  • The symptoms of the automobile fault code p0c1d include the Engine Light being ON or the Service Engine Soon Warning Light being illuminated.

The fault code p0c1d can be caused by a faulty Auxiliary Transmission Fluid Pump Control Module, an open or shorted harness, or a poor electrical connection in the module circuit.

  • The fault code p0c1d can be caused by: a faulty Auxiliary Transmission Fluid Pump Control Module, an open or shorted harness of the Auxiliary Transmission Fluid Pump Control Module, or a poor electrical connection in the circuit of the Auxiliary Transmission Fluid Pump Control Module.

To fix the p0c1d fault code, start by visually inspecting the wiring harness, connectors, and components for any damage or corrosion.

  • To fix the automobile fault code p0c1d, start by checking the possible causes mentioned above.
  • Then, visually inspect the wiring harness and connectors related to the issue.
  • Look for any damaged components and check for broken, bent, pushed out, or corroded pins on the connectors.
  • This fix should take approximately 1.0 hour.

The factors influencing the cost of diagnosing and fixing the automobile fault code p0c1d based on the estimated repair time of 1.0 hour include the hourly rate charged by auto repair shops, which typically ranges between $75 and $150.

The P0C1D fault code is related to the Auxiliary Transmission Fluid Pump Control Module. The Engine Control Module (ECM) keeps an eye on this module and triggers the OBDII code when it detects that the Auxiliary Transmission Fluid Pump Control Module is not functioning within the factory specifications. Specifically, the P0C1D code indicates an issue with the Internal Temperature Sensor Circuit RangePerformance of the Auxiliary Transmission Fluid Pump Control Module.

This means that there may be a problem with the temperature sensor circuitry inside the module, causing it to operate outside the expected range or not perform as intended. If you encounter this fault code, it is important to have the temperature sensor circuitry of the Auxiliary Transmission Fluid Pump Control Module checked and repaired if necessary. This will ensure that the module functions properly and helps maintain the optimal temperature of the transmission fluid, preventing potential damage to the transmission system.

What are the possible causes for the automobile fault code p0c1d?

If you see the engine light or service engine soon warning light on, the fault code P0C1D could be the culprit. This code is often caused by a faulty auxiliary transmission fluid pump control module or issues with the module’s harness and electrical connections. To fix the problem, visually inspect the wiring harness and connectors, checking for any damage or corrosion. Additionally, look out for broken, bent, pushed out, or corroded pins on the connectors.

How can I visually inspect the wiring harness and connectors to fix the fault code p0c1d?

If you’re dealing with the fault code p0c1d and your engine light is on, it’s time to visually inspect the wiring harness and connectors. This code is often caused by a faulty Auxiliary Transmission Fluid Pump Control Module or issues with the harness and electrical connections. To fix it, check for any damaged components and examine the wiring harness and connectors for any signs of damage like broken, bent, pushed out, or corroded pins. Don’t forget to address the possible causes mentioned earlier.

What should I look for when checking for damaged components and connector’s pins to resolve the fault code p0c1d?

To resolve the fault code p0c1d, start by visually inspecting the wiring harness and connectors. Look for any damaged components and check for broken, bent, pushed out, or corroded connector’s pins. These issues can cause a poor electrical connection or an open or shorted circuit in the Auxiliary Transmission Fluid Pump Control Module. By checking and addressing these possible causes, you can fix the problem and turn off the Engine Light or Service Engine Soon Warning Light.

p0c1d error fault code explained

If you see the Engine Light ON or the Service Engine Soon Warning Light, it could be due to a faulty Auxiliary Transmission Fluid Pump Control Module. To fix it, visually inspect the wiring harness and connectors for any damage. Also, check for broken, bent, pushed out, or corroded connector pins.

Scroll to Top