The automobile fault code P0C1C indicates a problem with the Auxiliary Transmission Fluid Pump Control Module. This can be identified by the Engine Light or Service Engine Soon Warning Light being illuminated.

The cause of this fault code could be a faulty module, an open or shorted harness, or a poor electrical connection. To fix this issue, it is recommended to visually inspect the wiring harness and connectors for any damage.

Additionally, check for broken, bent, pushed out, or corroded pins on the connectors. The repair time for this fault code is estimated to be 1.0. To interpret the fault code, it is important to check the “Possible Causes” listed above and perform the necessary inspections and repairs.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

When the engine light is on or the service engine soon warning light is illuminated, it could indicate the presence of fault code p0c1c.

  • The symptoms of the automobile fault code p0c1c include the Engine Light being ON or the Service Engine Soon Warning Light being illuminated.

The automobile fault code p0c1c can be caused by a faulty Auxiliary Transmission Fluid Pump Control Module, an open or shorted harness, or a poor electrical connection in the module circuit.

  • The fault code p0c1c can be caused by: a faulty Auxiliary Transmission Fluid Pump Control Module, an open or shorted harness for the Auxiliary Transmission Fluid Pump Control Module, and a poor electrical connection in the Auxiliary Transmission Fluid Pump Control Module circuit.

To fix the automobile fault code p0c1c, start by visually inspecting the wiring harness, connectors, and components for any damage or corrosion.

  • To fix the automobile fault code p0c1c, start by checking the possible causes mentioned above.
  • Then, visually inspect the wiring harness and connectors related to the issue.
  • Look for any damaged components and check for broken, bent, pushed out, or corroded connector pins.
  • This fix is estimated to take approximately 1.0 hour.

The factors influencing the cost of diagnosing and fixing the automobile fault code p0c1c based on the estimated repair time of 1.0 hour include the hourly rate charged by auto repair shops, which typically ranges between $75 and $150.

The P0C1C fault code refers to the Auxiliary Transmission Fluid Pump Control Module Internal Temperature Sensor Circuit. This code is set by the Engine Control Module (ECM) when the Auxiliary Transmission Fluid Pump Control Module does not meet the factory specifications. The ECM constantly monitors the Auxiliary Transmission Fluid Pump Control Module to ensure it is functioning properly.

If the internal temperature sensor circuit is not operating as it should, the P0C1C code will be triggered. When this fault code appears, it indicates that there may be an issue with the temperature sensor circuit within the Auxiliary Transmission Fluid Pump Control Module.

It is important to address this issue promptly to ensure the proper functioning of the transmission system.

What are the possible causes for the automobile fault code p0c1c?

If you’re seeing the fault code P0C1C on your automobile, it’s likely that your engine light is on or you have a service engine soon warning light. The possible causes for this code include a faulty auxiliary transmission fluid pump control module, an open or shorted harness for the control module, or a poor electrical connection in the control module circuit. To fix this issue, you should visually inspect the wiring harness and connectors, checking for any damage or broken, bent, pushed out, or corroded pins in the connectors.

How can I visually inspect the wiring harness and connectors to fix the fault code p0c1c?

If you’re dealing with the fault code p0c1c and your engine light is on, it’s time to visually inspect the wiring harness and connectors. The cause could be a faulty Auxiliary Transmission Fluid Pump Control Module or an open or shorted harness. To fix it, check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins. Don’t forget to check the “Possible Causes” listed above for a comprehensive solution.

What should I look for when checking for damaged components and connector’s pins to resolve the fault code p0c1c?

When troubleshooting the fault code p0c1c, start by checking for damaged components and connector’s pins. This can be done by visually inspecting the related wiring harness and connectors. Look for any signs of damage such as broken, bent, pushed out, or corroded pins. These issues can cause a poor electrical connection or an open/short circuit, leading to the engine light being on. By addressing these potential causes, you can resolve the fault code and ensure proper functioning of the auxiliary transmission fluid pump control module.

p0c1c error fault code explained

To fix the p0c1c fault code, start by visually inspecting the wiring harness and connectors. Look for any damage or corrosion. Check the Auxiliary Transmission Fluid Pump Control Module for any issues.

Make sure the harness is not open or shorted and that the circuit has a good electrical connection.

Scroll to Top