The automobile fault code P0BFE indicates a problem with the Hybrid Vehicle Motor Assembly. The most common symptom is the Engine Light being ON or the Service Engine Soon Warning Light. The cause of this fault code can be a faulty Hybrid Vehicle Motor Assembly, an open or shorted harness, or a poor electrical connection in the circuit.

To fix this issue, it is recommended to visually inspect the wiring harness and connectors for any damage. Check for broken, bent, pushed out, or corroded pins in the connectors.

The repair time for this fault code is estimated to be around 1.0.

It is important to address this issue promptly to prevent further damage to the vehicle’s hybrid system.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

If you see the Engine Light ON or the Service Engine Soon Warning Light, it could be a sign of the p0bfe fault code.

  • The symptoms of the automobile fault code p0bfe include the Engine Light being ON or the Service Engine Soon Warning Light being illuminated.

The automobile fault code p0bfe can be caused by a faulty Hybrid Vehicle Motor Assembly, an open or shorted harness, or a poor electrical connection in the circuit.

  • The fault code p0bfe can be caused by a faulty Hybrid Vehicle Motor Assembly, an open or shorted Hybrid Vehicle Motor Assembly harness, or a poor electrical connection in the Hybrid Vehicle Motor Assembly circuit.

To fix the p0bfe fault code, start by visually inspecting the wiring harness, connectors, and components for any damage or corrosion.

  • To fix the automobile fault code p0bfe, start by checking the possible causes mentioned above.
  • Then, visually inspect the wiring harness and connectors related to the issue.
  • Look for any damaged components and check for broken, bent, pushed out, or corroded connector pins.
  • This fix typically takes around 1.0 hour to complete.

The automobile fault code P0BFE has an estimated repair time of 1.0 hour.

Auto repair shops typically charge between $75 and $150 per hour for this type of repair.

The P0BFE fault code refers to a problem with the Drive Motor ‘B’ Phase U-V-W Current Sensor Correlation. This code is related to the three-phase alternating current that flows through the windings of the stator coil in the motor. The system controls the rotation of the magnetic field based on the position and speed of the rotor, which generates torque.

The code indicates that there is an issue with the correlation between the current sensor and the motor phase.

This can affect the efficiency and performance of the motor, especially at high speeds.

It is important to address this fault code to ensure proper functioning of the motor.

What are the possible causes of the automobile fault code P0BFE?

If you see the engine light or service engine soon warning light on, the fault code P0BFE could be the culprit. This code is often caused by a faulty hybrid vehicle motor assembly or issues with the assembly’s harness or electrical connections. To fix the problem, visually inspect the wiring harness and connectors, checking for any damage or corrosion. Also, look out for broken, bent, pushed out, or corroded connector pins. Don’t forget to consider the possible causes mentioned above.

How can I visually inspect the wiring harness and connectors to fix the P0BFE fault code?

If you’re dealing with the P0BFE fault code and your engine light is on, it’s time to visually inspect the wiring harness and connectors. This fault code can be caused by a faulty hybrid vehicle motor assembly, an open or shorted harness, or a poor electrical connection. To fix it, check the possible causes mentioned earlier and give the wiring harness and connectors a thorough inspection. Look out for any damaged components and check for broken, bent, pushed out, or corroded pins on the connectors.

What should I look for when checking for damaged components and connector pins to resolve the P0BFE fault code?

When resolving the P0BFE fault code, start by visually inspecting the wiring harness and connectors. Look for any damaged components and check for broken, bent, pushed out, or corroded connector pins. These issues can cause a poor electrical connection or an open or shorted circuit in the Hybrid Vehicle Motor Assembly. By thoroughly checking for these issues, you can identify and resolve the cause of the fault code.

p0bfe error fault code explained

If you see the Engine Light ON or the Service Engine Soon Warning Light, it could be due to a faulty Hybrid Vehicle Motor Assembly or issues with the wiring harness and electrical connections. To fix it, visually inspect the wiring harness and connectors for any damage or corrosion. Check for broken or bent pins as well.

Scroll to Top