The automobile fault code P0BDC indicates a problem with the Inverter With Converter Assembly. The most common symptom is the Engine Light being ON or the Service Engine Soon Warning Light. The cause of this fault code can be a faulty Inverter With Converter Assembly, an open or shorted harness, a poor electrical connection in the circuit, or a faulty HV Control ECU.

To fix this issue, you should visually inspect the wiring harness and connectors for any damage.

Look for broken, bent, pushed out, or corroded pins in the connectors. The repair time for this issue is estimated to be around 1.0.

It is important to address this problem promptly to prevent further damage to the vehicle’s electrical system.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

When the engine light is on or the service engine soon warning light is illuminated, it could be a sign of the p0bdc fault code.

  • The symptoms of the automobile fault code p0bdc include the Engine Light being ON or the Service Engine Soon Warning Light being illuminated.

The automobile fault code p0bdc can be caused by a faulty inverter with converter assembly, open or shorted harness, poor electrical connection in the circuit, or a faulty HV control ECU.

  • The fault code p0bdc can be caused by: a faulty Inverter With Converter Assembly, an open or shorted Inverter With Converter Assembly harness, a poor electrical connection in the Inverter With Converter Assembly circuit, or a faulty HV Control ECU.

To fix the automobile fault code p0bdc, start by visually inspecting the wiring harness, connectors, and components for any damage or corrosion.

  • To fix the automobile fault code p0bdc, start by checking the possible causes mentioned above.
  • Then, visually inspect the wiring harness and connectors related to the issue.
  • Look for any damaged components and check for broken, bent, pushed out, or corroded connector pins.
  • This fix is estimated to take approximately 1.0 hour.

The automobile fault code P0BDC has an estimated repair time of 1.0 hour.

Auto repair shops typically charge between $75 and $150 per hour for this type of repair.

The P0BDC fault code refers to a problem with the Drive Motor Inverter Temperature Sensor ‘E’ Circuit RangePerformance.

This sensor is located in the inverter and is used by the HV control ECU to monitor the temperature of the motor inverter. The same cooling system that cools the MG1 and MG2 is also used to cool the inverter, and the sensor’s characteristics are similar to the boost converter temperature sensor.

The HV control ECU uses the signals from the motor inverter temperature sensor to limit the load and ensure the effectiveness of the inverter cooling system.

It also detects any issues with the wiring or the sensor itself.

This code indicates that there is a problem with the circuit range or performance of the temperature sensor, which could lead to overheating of the inverter. It is important to address this issue to prevent further damage and ensure proper functioning of the vehicle.

What are the possible causes for the automobile fault code p0bdc?

If you see the engine light or service engine soon warning light on, the fault code P0BDC could be the culprit. This code is often caused by a faulty inverter with converter assembly, an open or shorted harness, a poor electrical connection in the inverter with converter assembly circuit, or a faulty HV control ECU. To fix the issue, visually inspect the wiring harness and connectors, checking for any damage or corrosion. Also, look out for broken, bent, pushed out, or corroded connector pins.

How can I visually inspect the wiring harness and connectors to fix the p0bdc fault code?

If you’re dealing with the p0bdc fault code and your engine light is on, it’s time to take action. The possible causes include a faulty inverter with converter assembly, an open or shorted harness, a poor electrical connection in the circuit, or a faulty HV control ECU. To fix this issue, start by visually inspecting the wiring harness and connectors. Look for any signs of damage, such as broken, bent, pushed out, or corroded pins. This simple step can help you identify and resolve the problem.

What should I look for when checking for damaged components and connector’s pins to resolve the p0bdc fault code?

When resolving the p0bdc fault code, start by checking for damaged components and connector’s pins. This can be done by visually inspecting the related wiring harness and connectors. Look for any signs of damage such as broken, bent, pushed out, or corroded pins. By doing this, you can identify any issues that may be causing the fault code and take the necessary steps to fix them.

p0bdc error fault code explained

If you see the Engine Light ON or the Service Engine Soon Warning Light, it could be due to a faulty Inverter With Converter Assembly or issues with the wiring harness and connectors.

To fix it, visually inspect the wiring and connectors, check for damaged components, and look for any broken or corroded pins.

Scroll to Top