[SOLVED] P0Bd3 Code: Fix Low Drive Motor Inverter Temperature Sensor ‘c’ Circuit

The automobile fault code P0BD3 indicates a problem with the Inverter With Converter Assembly. The most common symptom is the Engine Light being ON or the Service Engine Soon Warning Light.

The cause of this fault code can be a faulty Inverter With Converter Assembly, an open or shorted harness, a poor electrical connection in the circuit, or a faulty HV Control ECU.

To fix this issue, you should visually inspect the wiring harness and connectors for any damage. Look for broken, bent, pushed out, or corroded pins in the connectors.

The repair time for this issue is estimated to be around 1.0. It is important to address this problem promptly to prevent further damage to the vehicle.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

When the engine light is on or the service engine soon warning light is illuminated, it could be a sign of the p0bd3 fault code.

  • The symptoms of the automobile fault code p0bd3 include the Engine Light being ON or the Service Engine Soon Warning Light being illuminated.

The automobile fault code p0bd3 can be caused by a faulty inverter with converter assembly, an open or shorted harness, a poor electrical connection in the circuit, or a faulty HV control ECU.

  • The fault code p0bd3 can be caused by: a faulty Inverter With Converter Assembly, an open or shorted Inverter With Converter Assembly harness, a poor electrical connection in the Inverter With Converter Assembly circuit, or a faulty HV Control ECU.

To fix the automobile fault code p0bd3, start by visually inspecting the wiring harness, connectors, and components for any damage or corrosion.

  • To fix the automobile fault code p0bd3, first, check the possible causes mentioned above.
  • Then, visually inspect the wiring harness and connectors related to the issue.
  • Look for any damaged components and check for broken, bent, pushed out, or corroded pins in the connectors.
  • This fix is estimated to take approximately 1.0 hour.

The factors influencing the cost of diagnosing and fixing the automobile fault code p0bd3 are the estimated repair time and the hourly rate charged by auto repair shops. The estimated repair time for this fault code is 1.0 hour.

Auto repair shops typically charge between $75 and $150 per hour for their services.

These factors will determine the overall cost of diagnosing and fixing the p0bd3 fault code.

The P0BD3 fault code refers to a problem with the Drive Motor Inverter Temperature Sensor ‘C’ Circuit. This sensor is located in the inverter of the HV control ECU and is responsible for detecting the temperature of the motor inverter. The motor inverter temperature sensor operates similarly to the boost converter temperature sensor.

It helps regulate the load on the inverter by transmitting signals to the HV control ECU.

This ensures the effectiveness of the inverter cooling system and prevents overheating. The P0BD3 fault code can indicate a malfunction in the wiring of the motor inverter temperature sensor or a problem with the sensor itself. It is important to address this issue promptly to avoid potential damage to the inverter and ensure optimal performance of the vehicle.

What are the possible causes for the automobile fault code p0bd3?

If you see the engine light or service engine soon warning light on, the fault code P0BD3 could be the culprit. This code is often caused by a faulty inverter with converter assembly, an open or shorted harness, a poor electrical connection in the inverter with converter assembly circuit, or a faulty HV control ECU. To fix the issue, visually inspect the wiring harness and connectors, checking for any damage or corrosion. Also, look out for broken, bent, pushed out, or corroded connector pins.

How can I visually inspect the wiring harness and connectors to fix the p0bd3 fault code?

If you’re dealing with the p0bd3 fault code and your engine light is on, it’s time to take a closer look at the wiring harness and connectors. The possible causes include a faulty inverter with converter assembly, an open or shorted harness, a poor electrical connection in the circuit, or a faulty HV control ECU. To fix the issue, visually inspect the wiring harness and connectors for any signs of damage. Check for broken, bent, pushed out, or corroded pins on the connectors. Don’t forget to examine the components as well.

What should I look for when checking for damaged components or corroded connector pins to resolve the p0bd3 fault code?

If you’re dealing with a p0bd3 fault code and your engine light is on, it’s time to roll up your sleeves and get to work. The culprit could be a faulty Inverter With Converter Assembly or an issue with the harness or circuit connection. To resolve this, start by visually inspecting the wiring harness and connectors. Look out for any damaged components and pay close attention to the connector pins – they might be broken, bent, pushed out, or corroded. Don’t forget to check the “Possible Causes” mentioned earlier for a comprehensive fix.

p0bd3 error fault code explained

If you’re seeing the Engine Light ON or the Service Engine Soon Warning Light, the p0bd3 fault code might be the culprit. This code is usually caused by a faulty Inverter With Converter Assembly or issues with the wiring harness and connectors.

To fix it, visually inspect the wiring and connectors for any damage, and check for broken or corroded pins.

Scroll to Top