The automobile fault code P0BA4 indicates a problem with the HybridElectric Vehicle Battery Pack or the HybridElectric Vehicle Battery Interface Control Module. The most common symptom is the Engine Light being ON or the Service Engine Soon Warning Light.

To fix this issue, you should visually inspect the wiring harness and connectors for any damage. Look out for broken, bent, pushed out, or corroded connector pins. The repair time for this fault code is estimated to be around 1.0.

It is important to address this issue promptly to prevent further damage to the vehicle’s battery system.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

When the engine light is on or the service engine soon warning light is illuminated, it could be a sign of the p0ba4 fault code.

  • The symptoms of the automobile fault code p0ba4 include the Engine Light being ON or the Service Engine Soon Warning Light being illuminated.

The automobile fault code p0ba4 can be caused by a faulty HybridElectric Vehicle Battery Pack or a faulty HybridElectric Vehicle Battery Interface Control Module.

  • The fault code p0ba4 can be caused by a faulty Hybrid/Electric Vehicle Battery Pack or a faulty Hybrid/Electric Vehicle Battery Interface Control Module.

To fix the automobile fault code p0ba4, start by visually inspecting the wiring harness, connectors, and components for any damage or corrosion.

  • To fix the automobile fault code p0ba4, start by checking the possible causes mentioned above.
  • Then, visually inspect the wiring harness and connectors related to the issue.
  • Look for any damaged components and check for broken, bent, pushed out, or corroded pins on the connectors.
  • This fix should take approximately 1.0 hour.

The factors influencing the cost of diagnosing and fixing the automobile fault code p0ba4 include the estimated repair time of 1.0 hour and the typical hourly rate charged by auto repair shops, which ranges between $75 and $150.

The P0BA4 fault code refers to a circuit issue in the HybridElectric Vehicle battery. The battery pack consists of 288 cells, grouped in parallel sets of three.

There are a total of 96 cell groups connected in series, with each group rated at 3.7V. The battery is divided into three sections: section one has 90 cells, section two has 72 cells, and section three has 126 cells.

Each section is individually serviceable. The battery energy control module monitors the voltage of the cell groups through hybridEV battery interface control modules. These modules encode and transmit the voltage readings to the battery energy control module.

When a fault condition is detected, the battery energy control module communicates the diagnostics and system status to the hybridEV powertrain control module 2. This module is responsible for storing and displaying diagnostic trouble code information. The P0BA4 fault code specifically indicates a circuit issue in HybridElectric Vehicle Battery 22.

What are the possible causes of the automobile fault code P0BA4?

If you see the engine light on or the service engine soon warning light, the fault code P0BA4 could be the culprit. This code is often caused by a faulty hybrid/electric vehicle battery pack or a faulty hybrid/electric vehicle battery interface control module. To fix the issue, start by visually inspecting the wiring harness and connectors. Look for any damaged components and check for broken, bent, pushed out, or corroded connector pins. Don’t forget to check the possible causes listed above for a more comprehensive solution.

How can I visually inspect the wiring harness and connectors to fix the P0BA4 fault code?

If you’re dealing with the P0BA4 fault code and your engine light is on, it’s time to visually inspect the wiring harness and connectors. This code is often caused by a faulty hybrid/electric vehicle battery pack or a faulty battery interface control module. To fix it, check for any damaged components and look closely for broken, bent, pushed out, or corroded pins in the connectors. Don’t forget to examine the possible causes mentioned earlier.

What should I look for when checking for damaged components and connector pins to resolve the P0BA4 fault code?

When resolving the P0BA4 fault code, start by visually inspecting the wiring harness and connectors. Look for any damaged components and check for broken, bent, pushed out, or corroded connector pins. This can help identify any issues with the Hybrid/Electric Vehicle Battery Pack or the Hybrid/Electric Vehicle Battery Interface Control Module, which are common causes of this fault code. Don’t forget to check the “Possible Causes” listed above for further troubleshooting.

p0ba4 error fault code explained

If you see the Engine Light ON or the Service Engine Soon Warning Light, it could be due to a faulty HybridElectric Vehicle Battery Pack or a faulty HybridElectric Vehicle Battery Interface Control Module. To fix this, visually inspect the wiring harness and connectors, check for damaged components, and look for any broken, bent, pushed out, or corroded connector pins.

Scroll to Top