The automobile fault code P0B97 indicates a problem with the hybridelectric vehicle battery pack or the battery interface control module. The most common symptom is the engine light being illuminated or the service engine soon warning light. To fix this issue, you should visually inspect the wiring harness and connectors for any damage.

Look out for broken, bent, pushed out, or corroded connector pins.

The repair time for this fault code is estimated to be around 1.0. It is important to address this issue promptly to ensure the proper functioning of your vehicle.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

When the engine light is on or the service engine soon warning light is illuminated, it could be a sign of the p0b97 fault code.

  • The symptoms of the automobile fault code p0b97 include the Engine Light being ON or the Service Engine Soon Warning Light being illuminated.

The automobile fault code p0b97 can be caused by a faulty HybridElectric Vehicle Battery Pack or a faulty HybridElectric Vehicle Battery Interface Control Module.

  • The fault code p0b97 can be caused by a faulty Hybrid/Electric Vehicle Battery Pack or a faulty Hybrid/Electric Vehicle Battery Interface Control Module.

To fix the automobile fault code p0b97, start by visually inspecting the wiring harness, connectors, and components for any damage or corrosion.

  • To fix the automobile fault code p0b97, you need to check the possible causes mentioned above.
  • Inspect the wiring harness and connectors visually.
  • Look for any damaged components and check for broken, bent, pushed out, or corroded connector pins.
  • The estimated repair time for this fix is 1.0 hour.

The factors influencing the cost of diagnosing and fixing the automobile fault code p0b97 are the estimated repair time of 1.0 hour and the typical hourly rate charged by auto repair shops, which ranges between $75 and $150.

The P0B97 fault code refers to a low voltage condition in the 19th circuit of the HybridElectric Vehicle battery.

The battery pack consists of 288 cells, grouped in parallel sets of three. There are a total of 96 cell groups connected in series, with each group rated at 3.7V. The nominal system voltage is 355V DC.

The battery cells are divided into three sections.

Section one has 90 cells30 cell groups, located adjacent to the cowl and containing batteries 67 to 96.

Section two is behind section one, with 72 cells24 cell groups and batteries 43 to 66.

Section three is transverse, with 126 cells42 cell groups and batteries 1 to 42. The battery energy control module monitors the voltage of the cell groups through hybridEV battery interface control modules. Voltage sense circuits are attached to each group, terminating at a connector on the top surface of each section.

The voltage readings are encoded and transmitted to the battery energy control module.

When a fault condition is detected, the battery energy control module communicates diagnostics and system status to the hybridEV powertrain control module 2, which is responsible for trouble code information.

What are the possible causes for the automobile fault code P0B97?

If you see the engine light or service engine soon warning light on, the fault code P0B97 could be the culprit. This code is often caused by a faulty hybrid/electric vehicle battery pack or a faulty hybrid/electric vehicle battery interface control module. To fix the issue, start by visually inspecting the wiring harness and connectors. Look for any damaged components and check for broken, bent, pushed out, or corroded connector pins. Don’t forget to check the possible causes listed above for a more comprehensive solution.

How can I visually inspect the wiring harness and connectors to fix the P0B97 fault code?

If you’re dealing with the P0B97 fault code and your engine light is on, it’s time to take action. The most common causes for this code are a faulty hybrid/electric vehicle battery pack or a faulty hybrid/electric vehicle battery interface control module. To fix it, start by visually inspecting the wiring harness and connectors. Look for any signs of damage, such as broken or bent pins, corrosion, or components that are out of place. This simple step can help you identify and resolve the issue quickly.

What should I look for when checking for damaged components and connector pins to resolve the P0B97 fault code?

When resolving the P0B97 fault code, start by visually inspecting the wiring harness and connectors. Look for any damaged components and check for broken, bent, pushed out, or corroded connector pins. This can help identify any issues with the Hybrid/Electric Vehicle Battery Pack or the Hybrid/Electric Vehicle Battery Interface Control Module, which are common causes of this fault code. Don’t forget to check the “Possible Causes” listed above for further troubleshooting.

p0b97 error fault code explained

If you’re seeing the Engine Light ON or the Service Engine Soon Warning Light, the p0b97 fault code might be the culprit. This code is usually caused by a faulty HybridElectric Vehicle Battery Pack or a faulty HybridElectric Vehicle Battery Interface Control Module. To fix it, visually inspect the wiring harness and connectors, check for damaged components, and look for any broken, bent, pushed out, or corroded connector pins.

Scroll to Top