The automobile fault code P0B8E indicates a problem with the hybridelectric vehicle battery pack or the battery interface control module.

The most common symptom is the engine light being illuminated or the service engine soon warning light. The cause of this fault code can be a faulty battery pack or a faulty control module. To fix this issue, you should visually inspect the wiring harness and connectors for any damage.

Look for broken, bent, pushed out, or corroded pins in the connectors. This repair is of moderate importance and difficulty, with an estimated repair time of 1.0. It is crucial to address this issue promptly to ensure the proper functioning of your hybridelectric vehicle.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

When the engine light is on or the service engine soon warning light is illuminated, it could be a sign of the p0b8e fault code.

  • The symptoms of the automobile fault code p0b8e include the Engine Light being ON or the Service Engine Soon Warning Light being illuminated.

The automobile fault code p0b8e can be caused by a faulty HybridElectric Vehicle Battery Pack or a faulty HybridElectric Vehicle Battery Interface Control Module.

  • The fault code p0b8e can be caused by a faulty Hybrid/Electric Vehicle Battery Pack or a faulty Hybrid/Electric Vehicle Battery Interface Control Module.

To fix the automobile fault code p0b8e, start by visually inspecting the wiring harness, connectors, and components for any damage or corrosion.

  • To fix the automobile fault code p0b8e, start by checking the possible causes mentioned above.
  • Then, visually inspect the wiring harness and connectors related to the issue.
  • Look for any damaged components and check for broken, bent, pushed out, or corroded connector pins.
  • This fix is estimated to take approximately 1.0 hour.

The automobile fault code P0B8E diagnosis and fixing cost is influenced by the estimated repair time, which is 1.0 hour. Auto repair shops typically charge between $75 and $150 per hour for their services.

The P0B8E fault code refers to a high voltage issue in the HybridElectric Vehicle battery circuit 17. The battery pack consists of 288 cells, grouped in parallel sets of three. There are a total of 96 cell groups connected in series, with each group rated at 3.7V.

The battery cells are divided into three sections: section one with 90 cells, section two with 72 cells, and section three with 126 cells.

Each section contains a specific range of batteries.

The battery energy control module monitors the voltage of the cell groups through interface control modules.

Voltage sense circuits are attached to each group, and the readings are transmitted to the control module. If a fault condition is detected, the battery energy control module communicates it to the powertrain control module, which is responsible for diagnostic trouble code information. In the case of the P0B8E code, it indicates a high voltage problem in circuit 17 of the HybridElectric Vehicle battery.

What are the possible causes for the automobile fault code P0B8E and how can I visually inspect them?

If you’re seeing the engine light on or the service engine soon warning light, the fault code P0B8E could be the culprit. This code is often caused by a faulty hybrid/electric vehicle battery pack or a faulty hybrid/electric vehicle battery interface control module. To visually inspect these possible causes, check the related wiring harness and connectors for any damage. Look out for broken, bent, pushed out, or corroded connector pins. It’s important to thoroughly examine these components to identify any issues and proceed with the necessary fix.

How does a faulty Hybrid/Electric Vehicle Battery Pack or a faulty Hybrid/Electric Vehicle Battery Interface Control Module trigger the engine light to turn on?

When the engine light turns on in a hybrid or electric vehicle, it could be due to a faulty battery pack or a faulty battery interface control module. To fix this issue, start by checking the possible causes mentioned above. Take a close look at the wiring harness and connectors, visually inspect for any damage or broken components. Also, check for any bent, pushed out, or corroded pins in the connectors.

What steps should I take to check for damaged components and inspect the wiring harness and connectors when troubleshooting the fault code P0B8E?

To troubleshoot the fault code P0B8E, start by visually inspecting the wiring harness and connectors. Look for any signs of damage, such as broken or bent pins, or corrosion. Check the hybrid/electric vehicle battery pack and the battery interface control module for faults. By following these steps, you can identify and fix the issue causing the engine light to come on.

p0b8e error fault code explained

If you see the Engine Light ON or the Service Engine Soon Warning Light, it could be due to a faulty HybridElectric Vehicle Battery Pack or a faulty HybridElectric Vehicle Battery Interface Control Module. To fix it, visually inspect the wiring harness and connectors, check for damaged components, and look for any broken, bent, pushed out, or corroded connector pins.

Scroll to Top