The automobile fault code P0B88 indicates a problem with the hybridelectric vehicle battery pack or the battery interface control module. The most common symptom is the engine light being illuminated or the service engine soon warning light. To fix this issue, start by visually inspecting the wiring harness and connectors for any damage.

Look for broken, bent, pushed out, or corroded pins on the connectors.

The repair time for this fault code is estimated to be around 1.0 hour.

It is important to address this issue promptly to ensure the proper functioning of the hybridelectric vehicle system.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

When the engine light is on or the service engine soon warning light is illuminated, it could be a sign of the p0b88 fault code.

  • The symptoms of the automobile fault code p0b88 include the Engine Light being ON or the Service Engine Soon Warning Light being illuminated.

The automobile fault code p0b88 can be caused by a faulty HybridElectric Vehicle Battery Pack or a faulty HybridElectric Vehicle Battery Interface Control Module.

  • The fault code p0b88 can be caused by a faulty Hybrid/Electric Vehicle Battery Pack or a faulty Hybrid/Electric Vehicle Battery Interface Control Module.

To fix the automobile fault code p0b88, start by visually inspecting the wiring harness, connectors, and components for any damage or corrosion.

  • To fix the automobile fault code p0b88, start by checking the possible causes mentioned above.
  • Then, visually inspect the wiring harness and connectors related to the issue.
  • Look for any damaged components and check for broken, bent, pushed out, or corroded connector pins.
  • This fix is estimated to take approximately 1.0 hour.

The factors influencing the cost of diagnosing and fixing the automobile fault code p0b88 are the estimated repair time and the hourly rate charged by auto repair shops.

The estimated repair time for this fault code is 1.0 hour.

Auto repair shops typically charge between $75 and $150 per hour for their services.

These factors will determine the overall cost of diagnosing and fixing the p0b88 fault code.

The P0B88 fault code refers to a low voltage condition in the HybridElectric Vehicle battery circuit 16.

The battery pack consists of 288 cells, grouped in parallel sets of three.

There are a total of 96 cell groups connected in series, with each group rated at 3.7V.

The battery cells are divided into three sections: section one with 90 cells, section two with 72 cells, and section three with 126 cells. Each section is individually serviceable. The battery energy control module monitors the voltage of the cell groups through hybridEV battery interface control modules.

These modules encode and transmit the voltage readings to the battery energy control module. When a fault condition is detected, the battery energy control module communicates the diagnostics and system status to the hybridEV powertrain control module 2, which is responsible for trouble code information. In the case of the P0B88 code, it indicates a low voltage issue in the HybridElectric Vehicle battery circuit 16.

What are the possible causes for the automobile fault code P0B88?

If you see the engine light on or the service engine soon warning light, the fault code P0B88 could be the culprit. This code is often caused by a faulty hybrid/electric vehicle battery pack or a faulty hybrid/electric vehicle battery interface control module. To fix the issue, start by visually inspecting the wiring harness and connectors. Look for any damaged components and check for broken, bent, pushed out, or corroded connector pins. It’s important to address these possible causes to get your vehicle back on track.

How can I visually inspect the wiring harness and connectors to fix the P0B88 fault code?

If you’re dealing with the P0B88 fault code and your engine light is on, it’s time to visually inspect the wiring harness and connectors. This code is often caused by a faulty hybrid/electric vehicle battery pack or a faulty battery interface control module. To fix it, check the possible causes mentioned earlier and carefully examine the wiring harness and connectors. Look for any signs of damage, such as broken, bent, pushed out, or corroded pins on the connectors. This visual inspection can help you identify and resolve the issue.

What should I look for when checking for damaged components and connector pins to resolve the P0B88 fault code?

When resolving the P0B88 fault code, start by visually inspecting the wiring harness and connectors. Look for any damaged components and check for broken, bent, pushed out, or corroded connector pins. This can help identify any issues with the Hybrid/Electric Vehicle Battery Pack or the Hybrid/Electric Vehicle Battery Interface Control Module, which are common causes of this fault code. Don’t forget to check the “Possible Causes” listed above for further troubleshooting.

p0b88 error fault code explained

If you see the Engine Light ON or the Service Engine Soon Warning Light, it could be due to a faulty HybridElectric Vehicle Battery Pack or a faulty HybridElectric Vehicle Battery Interface Control Module. To fix it, visually inspect the wiring harness and connectors, check for damaged components, and look for any broken, bent, pushed out, or corroded connector pins.

Scroll to Top