The automobile fault code P0B73 indicates a problem with the hybridelectric vehicle battery pack or the battery interface control module.
The most common symptom is the engine light being illuminated or the service engine soon warning light. To fix this issue, you should visually inspect the wiring harness and connectors for any damage. Look out for broken, bent, pushed out, or corroded connector pins.
The repair time for this fault code is estimated to be around 1.0. It is important to address this issue promptly to ensure the proper functioning of your vehicle.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 10.0 (Out of 10) |
Decode The Symptoms: Unveiling The P0B73 Fault Code Mystery!
When the engine light is on or the service engine soon warning light is illuminated, it could be a sign of the p0b73 fault code.
- The symptoms of the automobile fault code p0b73 include the Engine Light being ON or the Service Engine Soon Warning Light being illuminated.
Unraveling The Mystery: What Causes Fault Code P0B73?
The automobile fault code p0b73 can be caused by a faulty HybridElectric Vehicle Battery Pack or a faulty HybridElectric Vehicle Battery Interface Control Module.
- The fault code P0B73 can be caused by a faulty Hybrid/Electric Vehicle Battery Pack or a faulty Hybrid/Electric Vehicle Battery Interface Control Module.
Fixing Code P0B73: Simple Steps To Resolve The Issue
To fix the automobile fault code p0b73, start by visually inspecting the wiring harness, connectors, and components for any damage or corrosion.
- To fix the automobile fault code p0b73, start by checking the possible causes mentioned above.
- Then, visually inspect the wiring harness and connectors for any damage.
- Look for broken, bent, pushed out, or corroded pins in the connectors.
- This fix should take approximately 1.0 hour.
Cracking The Code: P0B73 – Cost And Complexity Unveiled!
The factors influencing the cost of diagnosing and fixing the automobile fault code p0b73 are the estimated repair time of 1.0 hour and the typical auto repair shop charges of $75 to $150 per hour.
P0B73 Fault Code: Understanding The Description And Troubleshooting Steps
The P0B73 fault code refers to a performance issue with the 12th circuit of the HybridElectric Vehicle battery. The battery pack consists of 288 cells, grouped in parallel sets of three. There are a total of 96 cell groups connected in series, with each group rated at 3.7V.
The battery is divided into three sections: section one has 90 cells, section two has 72 cells, and section three has 126 cells. Each section contains a specific range of batteries.
The battery energy control module monitors the voltage of the cell groups through interface control modules. These modules encode the voltage readings and transmit them to the battery energy control module.
If a fault condition is detected, the battery energy control module communicates this information to the powertrain control module, which is responsible for diagnostic trouble code information.
In summary, the P0B73 fault code indicates a performance issue with the 12th circuit of the HybridElectric Vehicle battery, and the battery energy control module is responsible for monitoring and communicating this information.
FAQ
If you see the engine light or service engine soon warning light on, the fault code P0B73 could be the culprit. This code is often caused by a faulty hybrid/electric vehicle battery pack or a faulty hybrid/electric vehicle battery interface control module. To fix the issue, start by visually inspecting the wiring harness and connectors. Look for any damaged components and check for broken, bent, pushed out, or corroded connector pins. Don’t forget to check the possible causes listed above for further troubleshooting.
If you’re dealing with the P0B73 fault code and your engine light is on, it’s time to take action. The most common causes for this code are a faulty hybrid/electric vehicle battery pack or a faulty hybrid/electric vehicle battery interface control module. To fix it, start by visually inspecting the wiring harness and connectors. Look for any damaged components and check for broken, bent, pushed out, or corroded connector pins. This step is crucial in identifying and resolving the issue.
When resolving the P0B73 fault code, start by visually inspecting the wiring harness and connectors. Look for any damaged components and check for broken, bent, pushed out, or corroded connector pins. These issues can cause the Engine Light or Service Engine Soon Warning Light to turn on. By identifying and addressing these issues, such as a faulty Hybrid/Electric Vehicle Battery Pack or a faulty Hybrid/Electric Vehicle Battery Interface Control Module, you can effectively fix the problem.
Wrap Up
If you’re seeing the Engine Light ON or the Service Engine Soon Warning Light, the p0b73 fault code might be the culprit.
This code is usually caused by a faulty HybridElectric Vehicle Battery Pack or a faulty HybridElectric Vehicle Battery Interface Control Module. To fix it, visually inspect the wiring harness and connectors, check for damaged components, and look for any broken, bent, pushed out, or corroded connector pins.
