The automobile fault code P0B6E indicates a problem with the hybridelectric vehicle battery pack or the battery interface control module. The most common symptom is the engine light being illuminated or the service engine soon warning light.

To fix this issue, you should visually inspect the wiring harness and connectors for any damage. Look out for broken, bent, pushed out, or corroded connector pins. The repair time for this fault code is estimated to be around 1.0.

It is important to address this issue promptly to ensure the proper functioning of your vehicle.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

When the engine light is on or the service engine soon warning light is illuminated, it could be a sign of the p0b6e fault code.

  • The symptoms of the automobile fault code p0b6e include the Engine Light being ON or the Service Engine Soon Warning Light being illuminated.

The automobile fault code p0b6e can be caused by a faulty HybridElectric Vehicle Battery Pack or a faulty HybridElectric Vehicle Battery Interface Control Module.

  • The fault code p0b6e can be caused by a faulty Hybrid/Electric Vehicle Battery Pack or a faulty Hybrid/Electric Vehicle Battery Interface Control Module.

To fix the p0b6e fault code, start by visually inspecting the wiring harness, connectors, and components for any damage or corrosion.

  • To fix the automobile fault code p0b6e, you need to check the possible causes mentioned above.
  • Visually inspect the wiring harness and connectors related to the issue.
  • Look for any damaged components and check for broken, bent, pushed out, or corroded connector pins.
  • This fix should take approximately 1.0 hour.

The factors influencing the diagnosis and fixing cost of the automobile fault code p0b6e are the estimated repair time and the hourly rate charged by auto repair shops. The estimated repair time for this fault code is 1.0 hour. Auto repair shops typically charge between $75 and $150 per hour for their services.

These factors will determine the overall cost of diagnosing and fixing the p0b6e fault code.

The P0B6E fault code refers to a performance issue in the circuit of HybridElectric Vehicle Battery 11. The battery pack in a hybrid or electric vehicle consists of 288 cells, grouped in parallel sets of three.

These cell groups are connected in series to create a nominal system voltage of 355 V DC. The battery cells are divided into three sections: section one with 90 cells, section two with 72 cells, and section three with 126 cells.

Each section has its own serviceable components. The battery energy control module monitors the voltage of the cell groups through interface control modules. These modules encode the voltage readings and transmit them to the battery energy control module.

When a fault condition is detected, the battery energy control module communicates this information to the powertrain control module, which is responsible for diagnostic trouble code information.

What are the possible causes for the automobile fault code P0B6E and how can I visually inspect them?

If you’re seeing the engine light or service engine soon warning light and the fault code P0B6E, there are a couple of possible causes to consider. One is a faulty hybrid/electric vehicle battery pack, while another is a faulty hybrid/electric vehicle battery interface control module. To visually inspect these potential causes, check the related wiring harness and connectors. Look for any damaged components and examine the connector’s pins for any signs of being broken, bent, pushed out, or corroded. This inspection will help you identify any issues and determine the necessary fix.

How does a faulty Hybrid/Electric Vehicle Battery Pack or a faulty Hybrid/Electric Vehicle Battery Interface Control Module trigger the engine light to turn on?

When the engine light turns on in a hybrid or electric vehicle, it could be due to a faulty battery pack or a faulty battery interface control module. To fix this issue, start by checking the possible causes mentioned above. Take a close look at the wiring harness and connectors, visually inspect for any damage or broken components. Also, check for any bent, pushed out, or corroded pins in the connectors.

What steps should I take to check for damaged components and inspect the wiring harness and connectors when troubleshooting the fault code P0B6E?

To troubleshoot the fault code P0B6E, start by visually inspecting the wiring harness and connectors. Look for any signs of damage, such as broken or bent pins, or corrosion. Check the possible causes, which include a faulty hybrid/electric vehicle battery pack or a faulty battery interface control module. By thoroughly inspecting the components and connections, you can identify and fix the issue causing the engine light to come on.

p0b6e error fault code explained

If you see the Engine Light ON or the Service Engine Soon Warning Light, it could be due to a faulty HybridElectric Vehicle Battery Pack or a faulty HybridElectric Vehicle Battery Interface Control Module.

To fix this, visually inspect the wiring harness and connectors, check for damaged components, and look for any broken, bent, pushed out, or corroded connector pins.

Scroll to Top