The automobile fault code P0B6B indicates a problem with the hybridelectric vehicle battery pack or the battery interface control module. The most common symptom is the engine light being illuminated or the service engine soon warning light.

To fix this issue, you should visually inspect the wiring harness and connectors for any damage. Look out for broken, bent, pushed out, or corroded connector pins. The repair time for this fault code is estimated to be around 1.0.

It is important to address this issue promptly to ensure the proper functioning of your vehicle.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

When the engine light is on or the service engine soon warning light is illuminated, it could be a sign of the p0b6b fault code.

  • The symptoms of the automobile fault code p0b6b include the Engine Light being ON or the Service Engine Soon Warning Light being illuminated.

The automobile fault code p0b6b can be caused by a faulty HybridElectric Vehicle Battery Pack or a faulty HybridElectric Vehicle Battery Interface Control Module.

  • The fault code p0b6b can be caused by a faulty Hybrid/Electric Vehicle Battery Pack or a faulty Hybrid/Electric Vehicle Battery Interface Control Module.

To fix the automobile fault code p0b6b, start by visually inspecting the wiring harness, connectors, and components for any damage or corrosion.

  • To fix the automobile fault code p0b6b, start by checking the possible causes mentioned above.
  • Then, visually inspect the wiring harness and connectors related to the issue.
  • Look for any damaged components and check for broken, bent, pushed out, or corroded connector pins.
  • This fix is estimated to take approximately 1.0 hour.

The factors influencing the cost of diagnosing and fixing the automobile fault code p0b6b based on the estimated repair time of 1.0 hour include the following: 1. Repair Time: The estimated repair time for this fault code is 1.0 hour. 2. Labor Charges: Most auto repair shops charge between $75 and $150 per hour for labor. Considering these factors, the cost of diagnosing and fixing the p0b6b fault code would depend on the repair time and the labor charges of the auto repair shop.

The P0B6B fault code refers to a high voltage issue in the HybridElectric Vehicle battery circuit. The battery pack consists of 288 cells, grouped in parallel sets of three.

There are a total of 96 cell groups connected in series, with each group rated at 3.7V. The nominal system voltage is 355V DC. The battery cells are divided into three sections. Section one has 90 cells30 cell groups, section two has 72 cells24 cell groups, and section three has 126 cells42 cell groups.

Each section contains a specific range of batteries. The battery energy control module monitors the voltage of the cell groups through hybridEV battery interface control modules.

These modules encode the voltage readings and transmit them to the battery energy control module. If a fault condition is detected, the battery energy control module communicates this information to the hybridEV powertrain control module 2, which serves as the diagnostic trouble code host controller.

What are the possible causes for the automobile fault code P0B6B?

If you see the engine light or service engine soon warning light on, the fault code P0B6B could be the culprit. This code is often caused by a faulty hybrid/electric vehicle battery pack or a faulty hybrid/electric vehicle battery interface control module. To fix the issue, start by visually inspecting the wiring harness and connectors. Look for any damaged components and check for broken, bent, pushed out, or corroded connector pins. Don’t forget to check the possible causes listed above for a more comprehensive solution.

How can I visually inspect the wiring harness and connectors to fix the P0B6B fault code?

To fix the P0B6B fault code, start by visually inspecting the wiring harness and connectors. Look for any damaged components and check if there are any broken, bent, pushed out, or corroded pins in the connectors. This can help identify any issues with the Hybrid/Electric Vehicle Battery Pack or the Battery Interface Control Module, which could be causing the Engine Light to turn on. Don’t forget to check the “Possible Causes” listed above for further troubleshooting.

What should I look for when checking for damaged components and corroded connector pins to resolve the P0B6B fault code?

When resolving the P0B6B fault code, start by visually inspecting the wiring harness and connectors. Look for any damaged components and check for broken, bent, pushed out, or corroded connector pins. This can help identify any issues with the Hybrid/Electric Vehicle Battery Pack or the Hybrid/Electric Vehicle Battery Interface Control Module, which are common causes of this fault code. Don’t forget to check the “Possible Causes” listed above for further troubleshooting.

p0b6b error fault code explained

If you’re seeing the Engine Light ON or the Service Engine Soon Warning Light, the p0b6b fault code might be the culprit. This code is usually caused by a faulty HybridElectric Vehicle Battery Pack or a faulty HybridElectric Vehicle Battery Interface Control Module.

To fix it, visually inspect the wiring harness and connectors, check for damaged components, and look for any broken, bent, pushed out, or corroded connector pins.

Scroll to Top