The automobile fault code P0B67 indicates a problem with the battery smart unit or the HV battery assembly.

This issue is signaled by the engine light or service engine soon warning light turning on. To fix this, you should visually inspect the wiring harness and connectors for any damage. Look out for broken, bent, pushed out, or corroded pins on the connectors.

The repair time for this issue is estimated to be around 1.0. It is important to address this problem promptly to ensure the proper functioning of your vehicle.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

If you see the Engine Light ON or the Service Engine Soon Warning Light, it could be due to the p0b67 fault code.

  • The symptoms of the automobile fault code p0b67 include the Engine Light being ON or the Service Engine Soon Warning Light being illuminated.

The automobile fault code p0b67 can be caused by a faulty battery smart unit or a faulty HV battery assembly.

  • The fault code p0b67 can be caused by a faulty Battery smart unit or a faulty HV battery assembly.

To fix the automobile fault code p0b67, start by visually inspecting the wiring harness, connectors, and components for any damage or corrosion.

  • To fix the automobile fault code p0b67, start by checking the possible causes mentioned above.
  • Then, visually inspect the wiring harness and connectors for any damage.
  • Look for broken, bent, pushed out, or corroded pins on the connectors.
  • This fix should take approximately 1.0 hour.

The factors influencing the cost of diagnosing and fixing the automobile fault code p0b67 are the estimated repair time and the hourly rate charged by auto repair shops. The estimated repair time for this fault code is 1.0 hour. Auto repair shops typically charge between $75 and $150 per hour for their services.

These factors will determine the overall cost of diagnosing and fixing the p0b67 fault code.

The P0B67 fault code refers to the Hybrid Battery Voltage Sense ‘I’ Circuit IntermittentError. This code is related to the HV battery in hybrid vehicles, which uses nickel metal-hydride batteries and does not require external charging.

The power management control ECU is responsible for maintaining a constant state of charge (SOC) of the HV battery during driving.

The HV battery is made up of 28 modules, with each module consisting of eight 1.2V cells in series. The battery smart unit monitors the voltage of the battery blocks at 14 locations.

Each battery block is composed of 2 modules in a set. If the voltage difference between the battery blocks exceeds the standard, the battery smart unit detects a malfunction.

When the malfunction detection condition is met, the power management control ECU (HV CPU) will illuminate the Malfunction Indicator Lamp (MIL) and set the P0B67 Diagnostic Trouble Code (DTC).

This code indicates an intermittent or error in the Hybrid Battery Voltage Sense ‘I’ Circuit.

It is important to address this issue promptly to ensure the proper functioning of the hybrid vehicle’s battery system.

What are the possible causes for the automobile fault code P0B67?

If you see the engine light or service engine soon warning light on, the fault code P0B67 could be the culprit. This code is often caused by a faulty battery smart unit or a faulty HV battery assembly. To fix the issue, start by visually inspecting the wiring harness and connectors. Look for any damaged components and check for broken, bent, pushed out, or corroded connector pins. It’s important to address these possible causes to get your automobile back in top shape.

How can I visually inspect the wiring harness and connectors to fix the P0B67 fault code?

If you’re dealing with the P0B67 fault code and your engine light is on, it’s time to take action. The most common causes are a faulty battery smart unit or a faulty HV battery assembly. To fix this issue, start by visually inspecting the wiring harness and connectors. Look for any signs of damage, such as broken or bent pins, corrosion, or components that are out of place. This simple step can help you identify and resolve the problem. Don’t delay, get to the bottom of it now!

What should I look for when checking for damaged components or corroded connector pins to resolve the P0B67 fault code?

When resolving the P0B67 fault code, start by visually inspecting the wiring harness and connectors. Look for any damaged components and check for broken, bent, pushed out, or corroded connector pins. This can help identify any issues with the battery smart unit or the HV battery assembly, which are common causes of this fault code. Don’t forget to check the “Possible Causes” listed above for further guidance.

p0b67 error fault code explained

If you’re seeing the Engine Light ON or the Service Engine Soon Warning Light, it could be due to a faulty Battery smart unit or a faulty HV battery assembly. To fix this, visually inspect the wiring harness and connectors for any damage.

Also, check for broken, bent, pushed out, or corroded connector pins.

Scroll to Top