The automobile fault code P0B65 indicates a problem with the HybridElectric Vehicle Battery Pack or the HybridElectric Vehicle Battery Interface Control Module. The most common symptom is the Engine Light being ON or the Service Engine Soon Warning Light. To fix this issue, you should visually inspect the wiring harness and connectors for any damage.

Look out for broken, bent, pushed out, or corroded connector pins.

The repair time for this fault code is estimated to be around 1.0. It is important to address this issue promptly to ensure the proper functioning of your vehicle.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

When the engine light is on or the service engine soon warning light is illuminated, it could be a sign of the p0b65 fault code.

  • The symptoms of the automobile fault code p0b65 include the Engine Light being ON or the Service Engine Soon Warning Light being illuminated.

The automobile fault code p0b65 can be caused by a faulty HybridElectric Vehicle Battery Pack or a faulty HybridElectric Vehicle Battery Interface Control Module.

  • The fault code p0b65 can be caused by a faulty Hybrid/Electric Vehicle Battery Pack or a faulty Hybrid/Electric Vehicle Battery Interface Control Module.

To fix the automobile fault code p0b65, start by visually inspecting the wiring harness, connectors, and components for any damage or corrosion.

  • To fix the automobile fault code p0b65, first, check the possible causes mentioned above.
  • Then, visually inspect the wiring harness and connectors related to the issue.
  • Look for any damaged components and check for broken, bent, pushed out, or corroded pins in the connectors.
  • This fix is estimated to take approximately 1.0 hour.

The factors influencing the diagnosis and fixing cost of the automobile fault code p0b65 are the estimated repair time and the hourly rate charged by auto repair shops. The estimated repair time for this fault code is 1.0 hour. Auto repair shops typically charge between $75 and $150 per hour for their services.

These factors will determine the overall cost of diagnosing and fixing the p0b65 fault code.

The P0B65 fault code refers to a low voltage condition in the HybridElectric Vehicle battery circuit 9.

The battery pack consists of 288 cells, grouped in parallel sets of three.

There are a total of 96 cell groups connected in series, with each group rated at 3.7V. The nominal system voltage is 355V DC.

The battery cells are divided into three sections. Section one has 90 cells (30 cell groups), section two has 72 cells (24 cell groups), and section three has 126 cells (42 cell groups). Each section is individually serviceable.

The battery energy control module monitors the voltage of the cell groups through hybridEV battery interface control modules. Voltage sense circuits are attached to each group, and the readings are transmitted to the control module. When a fault condition is detected, the battery energy control module communicates with the hybridEV powertrain control module 2 to indicate the issue.

The powertrain control module is responsible for diagnostic trouble code information.

What are the possible causes for the automobile fault code p0b65?

If you see the engine light on or the service engine soon warning light, the fault code P0B65 could be the culprit. This code is often caused by a faulty hybrid/electric vehicle battery pack or a faulty hybrid/electric vehicle battery interface control module. To fix the issue, start by visually inspecting the wiring harness and connectors. Look for any damaged components and check for broken, bent, pushed out, or corroded connector pins. Don’t forget to check the possible causes listed above for a more comprehensive solution.

How can I visually inspect the wiring harness and connectors to fix the fault code p0b65?

If you’re dealing with the fault code p0b65 and your engine light is on, it’s time to visually inspect the wiring harness and connectors. This could be caused by a faulty hybrid/electric vehicle battery pack or a faulty hybrid/electric vehicle battery interface control module. To fix it, check the possible causes mentioned earlier and give the wiring harness and connectors a thorough visual inspection. Look out for any damaged components and check for broken, bent, pushed out, or corroded connector pins.

What should I look for when checking for damaged components and connector’s pins to resolve the fault code p0b65?

When resolving the fault code p0b65, start by checking for damaged components and connector’s pins. This can be done by visually inspecting the related wiring harness and connectors. Look for any signs of damage such as broken, bent, pushed out, or corroded pins. By identifying and addressing these issues, you can effectively resolve the problem and turn off the Engine Light or Service Engine Soon Warning Light. Don’t forget to also consider the possible causes mentioned above, such as a faulty Hybrid/Electric Vehicle Battery Pack or a faulty Hybrid/Electric Vehicle Battery Interface Control Module.

p0b65 error fault code explained

If you’re seeing the Engine Light ON or the Service Engine Soon Warning Light, the p0b65 fault code might be the culprit. This code is usually caused by a faulty HybridElectric Vehicle Battery Pack or a faulty HybridElectric Vehicle Battery Interface Control Module.

To fix it, visually inspect the wiring harness and connectors, check for damaged components, and look for any broken, bent, pushed out, or corroded connector pins.

Scroll to Top