The automobile fault code P0B60 indicates a problem with the HybridElectric Vehicle Battery Pack or the HybridElectric Vehicle Battery Interface Control Module. The most common symptom is the Engine Light being ON or the Service Engine Soon Warning Light. To fix this issue, you should visually inspect the wiring harness and connectors for any damage.

Look for broken, bent, pushed out, or corroded connector pins.

The repair time for this fault code is estimated to be around 1.0 hour. It is important to address this issue promptly to ensure the proper functioning of your vehicle.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

When the engine light is on or the service engine soon warning light is illuminated, it could be a sign of the p0b60 fault code.

  • The symptoms of the automobile fault code p0b60 include the Engine Light being ON or the Service Engine Soon Warning Light being illuminated.

The automobile fault code p0b60 can be caused by a faulty HybridElectric Vehicle Battery Pack or a faulty HybridElectric Vehicle Battery Interface Control Module.

  • The fault code p0b60 can be caused by a faulty Hybrid/Electric Vehicle Battery Pack or a faulty Hybrid/Electric Vehicle Battery Interface Control Module.

To fix the automobile fault code p0b60, start by visually inspecting the wiring harness, connectors, and components for any damage or corrosion.

  • To fix the automobile fault code p0b60, you need to check the possible causes mentioned above.
  • Inspect the wiring harness and connectors visually.
  • Look for any damaged components and check for broken, bent, pushed out, or corroded connector pins.
  • The estimated repair time for this fix is 1.0 hour.

The factors influencing the cost of diagnosing and fixing the automobile fault code p0b60 are the estimated repair time and the hourly rate charged by auto repair shops.

The estimated repair time for this fault code is 1.0 hour. Auto repair shops typically charge between $75 and $150 per hour for their services.

These factors will determine the overall cost of diagnosing and fixing the p0b60 fault code.

The P0B60 fault code refers to a low voltage condition in the HybridElectric Vehicle battery circuit 8.

The battery pack consists of 288 cells, grouped in parallel sets of three. There are a total of 96 cell groups connected in series, with each group rated at 3.7V. The nominal system voltage is 355V DC.

The battery cells are divided into three sections.

Section one has 90 cells (30 cell groups), section two has 72 cells (24 cell groups), and section three has 126 cells (42 cell groups). Each section is individually serviceable.

The battery energy control module monitors the voltage of the cell groups through hybridEV battery interface control modules. These modules encode the voltage readings and transmit them to the battery energy control module.

When a fault condition is detected, the battery energy control module communicates the diagnostics and system status to the hybridEV powertrain control module 2, which is responsible for trouble code information.

In the case of the P0B60 code, it indicates a low voltage issue in circuit 8 of the HybridElectric Vehicle battery.

What are the possible causes for the automobile fault code P0B60?

If you see the engine light on or the service engine soon warning light, the fault code P0B60 could be the culprit. This code is often caused by a faulty hybrid/electric vehicle battery pack or a faulty hybrid/electric vehicle battery interface control module. To fix the issue, start by visually inspecting the wiring harness and connectors. Look for any damaged components and check for broken, bent, pushed out, or corroded connector pins. Don’t forget to check the possible causes listed above for further troubleshooting.

How can I visually inspect the wiring harness and connectors to fix the P0B60 fault code?

If you’re dealing with the P0B60 fault code and your engine light is on, it’s time to take action. The most common causes for this code are a faulty hybrid/electric vehicle battery pack or a faulty hybrid/electric vehicle battery interface control module. To fix it, start by visually inspecting the wiring harness and connectors. Look for any damaged components and check for broken, bent, pushed out, or corroded connector pins. This step is crucial in identifying and resolving the issue. Don’t delay, get to work on those inspections!

What should I look for when checking for damaged components and connector pins to resolve the P0B60 fault code?

When resolving the P0B60 fault code, start by visually inspecting the wiring harness and connectors. Look for any damaged components and check for broken, bent, pushed out, or corroded connector pins. These issues can cause the Engine Light or Service Engine Soon Warning Light to turn on. By checking for these specific problems, you can identify and resolve the cause of the fault code.

p0b60 error fault code explained

If you see the Engine Light ON or the Service Engine Soon Warning Light, it could be due to a faulty HybridElectric Vehicle Battery Pack or a faulty HybridElectric Vehicle Battery Interface Control Module.

To fix it, visually inspect the wiring harness and connectors, check for damaged components, and look for any broken, bent, pushed out, or corroded connector pins.

Scroll to Top