The automobile fault code P0B47 indicates a problem with the hybridelectric vehicle battery pack or the battery interface control module.

The most common symptom is the engine light being illuminated or the service engine soon warning light.

To fix this issue, you should visually inspect the wiring harness and connectors for any damage. Look out for broken, bent, pushed out, or corroded connector pins. The repair time for this fault code is estimated to be around 1.0.

It is important to address this issue promptly to ensure the proper functioning of your vehicle.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

When the engine light is on or the service engine soon warning light is illuminated, it could be a sign of the p0b47 fault code.

  • The symptoms of the automobile fault code p0b47 include the Engine Light being ON or the Service Engine Soon Warning Light being illuminated.

The automobile fault code p0b47 can be caused by a faulty HybridElectric Vehicle Battery Pack or a faulty HybridElectric Vehicle Battery Interface Control Module.

  • The fault code p0b47 can be caused by a faulty Hybrid/Electric Vehicle Battery Pack or a faulty Hybrid/Electric Vehicle Battery Interface Control Module.

To fix the automobile fault code p0b47, start by visually inspecting the wiring harness and connectors for any damage or corrosion.

  • To fix the automobile fault code p0b47, first, check the possible causes mentioned above.
  • Then, visually inspect the wiring harness and connectors related to the issue.
  • Look for any damaged components and check for broken, bent, pushed out, or corroded pins in the connectors.
  • This fix is estimated to take approximately 1.0 hour.

The automobile fault code p0b47 diagnosis and fixing cost is influenced by the estimated repair time of 1.0 hour. Auto repair shops typically charge between $75 and $150 per hour for their services.

The P0B47 fault code refers to a performance issue in the third circuit of the hybridelectric vehicle battery. The battery pack in a hybridelectric vehicle consists of 288 cells, grouped in parallel sets of three.

These cell groups are connected in series to create a nominal system voltage of 355 V DC. The battery cells are divided into three sections: section one with 90 cells, section two with 72 cells, and section three with 126 cells. Each section has its own serviceable components. The battery energy control module monitors the voltage of the cell groups through hybridEV battery interface control modules.

These modules encode the voltage readings and transmit them to the battery energy control module. If a fault condition is detected, the battery energy control module communicates this information to the hybridEV powertrain control module 2, which acts as the diagnostic trouble code host controller. In summary, the P0B47 fault code indicates a performance issue in the third circuit of the hybridelectric vehicle battery.

It is important to address this issue to ensure the proper functioning of the vehicle’s powertrain.

What are the possible causes for the automobile fault code p0b47?

If you see the engine light or service engine soon warning light on, the fault code P0B47 could be the culprit. This code is often caused by a faulty hybrid/electric vehicle battery pack or a faulty hybrid/electric vehicle battery interface control module. To fix the issue, start by visually inspecting the wiring harness and connectors. Look for any damaged components and check for broken, bent, pushed out, or corroded connector pins. It’s important to address these possible causes to get your vehicle back on track.

How can I visually inspect the wiring harness and connectors to fix the p0b47 fault code?

If you’re dealing with the p0b47 fault code and your engine light is on, it’s time to take action. The most common causes for this code are a faulty hybrid/electric vehicle battery pack or a faulty hybrid/electric vehicle battery interface control module. To fix it, start by visually inspecting the wiring harness and connectors. Look for any damaged components and check for broken, bent, pushed out, or corroded connector pins. Don’t delay, get to the bottom of the issue and get your engine running smoothly again.

What should I look for when checking for damaged components and connector pins to resolve the p0b47 fault code?

When resolving the p0b47 fault code, start by checking for damaged components and connector pins. This can be done by visually inspecting the related wiring harness and connectors. Look for any signs of damage such as broken, bent, pushed out, or corroded connector pins. By identifying and addressing these issues, you can effectively resolve the fault code and prevent further complications.

p0b47 error fault code explained

If you see the Engine Light ON or the Service Engine Soon Warning Light, it could be due to a faulty HybridElectric Vehicle Battery Pack or a faulty HybridElectric Vehicle Battery Interface Control Module. To fix it, visually inspect the wiring harness and connectors, check for damaged components, and look for any broken, bent, pushed out, or corroded connector pins.

Scroll to Top