The automobile fault code P0B42 indicates a problem with the hybridelectric vehicle battery pack or the battery interface control module.

The most common symptom is the engine light being illuminated or the service engine soon warning light. To fix this issue, you should visually inspect the wiring harness and connectors for any damage. Look for broken, bent, pushed out, or corroded pins on the connectors.

The repair time for this fault code is estimated to be around 1.0 hour.

It is important to address this issue promptly to ensure the proper functioning of your vehicle.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

If you see the Engine Light ON or the Service Engine Soon Warning Light, it could be due to the p0b42 fault code.

  • The symptoms of the automobile fault code p0b42 include the Engine Light being ON or the Service Engine Soon Warning Light being illuminated.

The automobile fault code p0b42 can be caused by a faulty HybridElectric Vehicle Battery Pack or a faulty HybridElectric Vehicle Battery Interface Control Module.

  • The fault code p0b42 can be caused by a faulty Hybrid/Electric Vehicle Battery Pack or a faulty Hybrid/Electric Vehicle Battery Interface Control Module.

To fix the automobile fault code p0b42, start by visually inspecting the wiring harness, connectors, and components for any damage or corrosion.

  • To fix the automobile fault code p0b42, start by checking the possible causes mentioned above.
  • Then, visually inspect the wiring harness and connectors related to the issue.
  • Look for any damaged components and check for broken, bent, pushed out, or corroded connector pins.
  • This fix is estimated to take approximately 1.0 hour.

The factors influencing the cost of diagnosing and fixing the automobile fault code p0b42 are the estimated repair time and the hourly rate charged by auto repair shops. The estimated repair time for this fault code is 1.0 hour.

Auto repair shops typically charge between $75 and $150 per hour for their services.

These factors will determine the overall cost of diagnosing and fixing the p0b42 fault code.

The P0B42 fault code refers to a low voltage condition in the HybridElectric Vehicle Battery 2 Circuit.

The battery pack in a hybrid or electric vehicle consists of 288 cells, grouped in parallel sets of three.

These cell groups are connected in series to create a nominal system voltage of 355 V DC. The battery cells are divided into three sections: section one with 90 cells, section two with 72 cells, and section three with 126 cells.

Each section has its own serviceable components. The battery energy control module monitors the voltage of the cell groups through interface control modules. These modules encode the voltage readings and transmit them to the battery energy control module.

When a fault condition is detected, the battery energy control module communicates this information to the powertrain control module, which is responsible for diagnostic trouble code information.

In the case of the P0B42 code, it indicates a low voltage issue in the HybridElectric Vehicle Battery 2 Circuit.

What are the possible causes for the automobile fault code p0b42?

If you see the engine light or service engine soon warning light on, the fault code P0B42 could be the culprit. This code is often caused by a faulty hybrid/electric vehicle battery pack or a faulty hybrid/electric vehicle battery interface control module. To fix the issue, start by visually inspecting the wiring harness and connectors. Look for any damaged components and check for broken, bent, pushed out, or corroded connector pins. Don’t forget to check the possible causes listed above for a more comprehensive solution.

How can I visually inspect the wiring harness and connectors to fix the p0b42 fault code?

If you’re dealing with the p0b42 fault code and your engine light is on, it’s time to take action. The most common causes for this code are a faulty hybrid/electric vehicle battery pack or a faulty hybrid/electric vehicle battery interface control module. To fix it, start by visually inspecting the wiring harness and connectors. Look for any damaged components and check for broken, bent, pushed out, or corroded connector pins. This simple step can help you identify and resolve the issue. Don’t delay, get to it now!

What should I look for when checking for damaged components and connector pins to resolve the p0b42 fault code?

When resolving the p0b42 fault code, start by checking for damaged components and connector pins. This can be done by visually inspecting the related wiring harness and connectors. Look for any broken, bent, pushed out, or corroded connector pins. By doing this, you can identify any issues that may be causing the fault code and take the necessary steps to fix them.

p0b42 error fault code explained

If you see the Engine Light ON or the Service Engine Soon Warning Light, it could be due to a faulty HybridElectric Vehicle Battery Pack or a faulty HybridElectric Vehicle Battery Interface Control Module. To fix it, visually inspect the wiring harness and connectors, check for damaged components, and look for any broken, bent, pushed out, or corroded connector pins.

Scroll to Top