The automobile fault code P0B0C indicates a problem with the Auxiliary Transmission Fluid Pump. This can be identified by the Engine Light being ON or the Service Engine Soon Warning Light. The cause of this fault code could be a faulty pump, an open or shorted harness, or a poor electrical connection in the pump circuit.

To fix this issue, it is recommended to visually inspect the wiring harness and connectors for any damage. Look out for broken, bent, pushed out, or corroded pins in the connectors.

The repair time for this fault code is estimated to be 1.0. It is important to address this issue promptly to prevent further damage to the transmission system.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

When the engine light is on or the service engine soon warning light is illuminated, it could indicate the presence of fault code p0b0c.

  • The symptoms of the automobile fault code p0b0c include the Engine Light being ON or the Service Engine Soon Warning Light being illuminated.

The automobile fault code p0b0c can be caused by a faulty auxiliary transmission fluid pump, an open or shorted harness, or a poor electrical connection in the pump circuit.

  • The fault code p0b0c can be caused by: a faulty auxiliary transmission fluid pump, an open or shorted harness for the auxiliary transmission fluid pump, and a poor electrical connection in the auxiliary transmission fluid pump circuit.

To fix the p0b0c fault code, start by visually inspecting the wiring harness, connectors, and components for any damage or corrosion.

  • To fix the automobile fault code p0b0c, you need to follow these steps: – Check the possible causes mentioned above.
  • – Visually inspect the wiring harness and connectors related to the fault code.
  • – Look for any damaged components.
  • – Check for broken, bent, pushed out, or corroded pins in the connectors.
  • – Estimated repair time for this fix is 1.0 hour.

The factors influencing the cost of diagnosing and fixing the automobile fault code p0b0c based on the estimated repair time of 1.0 hour include the hourly rate charged by auto repair shops, which typically ranges between $75 and $150.

The P0B0C fault code refers to a hydraulic leakage in the Auxiliary Transmission Fluid Pump.

This code is set by the Engine Control Module (ECM) when it detects that the signal from the pump is not within the specifications set by the manufacturer.

When this fault code appears, it indicates that there is a problem with the hydraulic system of the Auxiliary Transmission Fluid Pump. This pump is responsible for maintaining the proper fluid pressure in the transmission, ensuring smooth gear shifts and overall performance. If left unaddressed, a hydraulic leakage in the pump can lead to a loss of fluid pressure, resulting in erratic shifting, slipping gears, and potential damage to the transmission.

It is important to have this issue diagnosed and repaired promptly to avoid further complications and ensure the optimal functioning of your vehicle’s transmission system.

What are the possible causes for the automobile fault code p0b0c?

If you see the engine light or service engine soon warning light on, the fault code P0B0C could be the culprit. This code is often caused by a faulty auxiliary transmission fluid pump, an open or shorted harness, or a poor electrical connection in the pump circuit. To fix the issue, visually inspect the wiring harness and connectors, checking for any damage or corrosion. Also, look out for broken, bent, pushed out, or corroded pins in the connectors.

How can I visually inspect the wiring harness and connectors to fix the fault code p0b0c?

If you’re dealing with the fault code p0b0c and your engine light is on, it’s time to visually inspect the wiring harness and connectors. This code can be caused by a faulty auxiliary transmission fluid pump, an open or shorted harness, or a poor electrical connection. To fix it, check the possible causes mentioned earlier and give the wiring harness and connectors a thorough visual inspection. Look out for any damaged components and check for broken, bent, pushed out, or corroded pins on the connectors.

What should I look for when checking for damaged components and connector’s pins to resolve the fault code p0b0c?

When dealing with the fault code p0b0c, it’s important to address the symptoms and causes effectively. If you notice the Engine Light ON or the Service Engine Soon Warning Light, the issue may lie with a faulty Auxiliary Transmission Fluid Pump or an open/shorted harness. To resolve this, visually inspect the wiring harness and connectors, paying close attention to any damaged components. Look out for broken, bent, pushed out, or corroded connector’s pins. This thorough examination will help identify and rectify the problem.

p0b0c error fault code explained

To fix the p0b0c fault code, start by visually inspecting the wiring harness and connectors. Look for any damage or corrosion.

Check for broken, bent, or pushed out pins on the connectors.

This will help identify any issues with the faulty auxiliary transmission fluid pump or poor electrical connections.

Scroll to Top