The automobile fault code P0ACB indicates a problem with the HybridEV Battery Assembly. The most common symptom is the Engine Light being ON or the Service Engine Soon Warning Light.

The cause of this fault code can be a faulty HybridEV Battery Assembly, an open or shorted harness, a poor electrical connection in the circuit, or a faulty HybridEV Battery Interface Control Module.

To fix this issue, you should visually inspect the wiring harness and connectors for any damage. Look for broken, bent, pushed out, or corroded pins in the connectors. The repair time for this issue is estimated to be around 1.0 hour.

It is important to address this problem promptly to prevent further damage to the vehicle’s hybrid or electric system.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

When the engine light is on or the service engine soon warning light is illuminated, it could be a sign of the p0acb fault code.

  • The symptoms of the automobile fault code p0acb include the Engine Light being ON or the Service Engine Soon Warning Light being illuminated.

The automobile fault code p0acb can be caused by a faulty HybridEV Battery Assembly, an open or shorted HybridEV Battery Assembly harness, a poor electrical connection in the HybridEV Battery Assembly circuit, or a faulty HybridEV Battery Interface Control Module.

  • The fault code p0acb can be caused by a faulty Hybrid/EV Battery Assembly, an open or shorted Hybrid/EV Battery Assembly harness, a poor electrical connection in the Hybrid/EV Battery Assembly circuit, or a faulty Hybrid/EV Battery Interface Control Module.

To fix the automobile fault code p0acb, start by visually inspecting the wiring harness, connectors, and components for any damage or corrosion.

  • To fix the automobile fault code p0acb, start by checking the possible causes mentioned above.
  • Then, visually inspect the wiring harness and connectors related to the issue.
  • Look for any damaged components and check for broken, bent, pushed out, or corroded connector pins.
  • This fix is estimated to take approximately 1.0 hour.

The automobile fault code p0acb diagnosis and fixing cost is influenced by the estimated repair time of 1.0 hour. Most auto repair shops charge between $75 and $150 per hour for their services.

The P0ACB fault code refers to a problem with the HybridEV Battery Temperature Sensor 3. This sensor is responsible for monitoring the temperature of the battery cell group within the battery sections of a hybrid or electric vehicle.

There are two temperature sensors located in each battery section, and they function as variable resistors that measure the battery temperature.

The sensor resistance changes with the temperature, increasing as the temperature decreases and decreasing as the temperature increases.

The HybridEV interface control module supplies 5V to the signal circuit and acts as a ground for the low reference circuit. The temperature sensor values are communicated to the HybridEV Powertrain Control Module via serial data. The Powertrain Control Module uses these temperature sensor values to determine the overall battery module temperature and control the operation of the battery cooling system.

The P0ACB fault code is triggered when the difference between one battery temperature sensor and the average of the other sensors exceeds 25°C (45°F).

This indicates a performance issue with the HybridEV Battery Temperature Sensor 3.

What are the possible causes for the automobile fault code p0acb?

If you see the engine light on or the service engine soon warning light, the fault code P0ACB could be the culprit. This code is often caused by a faulty hybrid/EV battery assembly, an open or shorted harness, a poor electrical connection in the hybrid/EV battery assembly circuit, or a faulty hybrid/EV battery interface control module. To fix this issue, visually inspect the wiring harness and connectors, checking for any damage or broken, bent, pushed out, or corroded pins. Don’t forget to consider the possible causes mentioned above.

How can I visually inspect the wiring harness and connectors to fix the p0acb fault code?

If you’re dealing with the p0acb fault code and your engine light is on, it’s time to take a closer look at the wiring harness and connectors. The possible causes include a faulty Hybrid/EV Battery Assembly, an open or shorted harness, a poor electrical connection in the circuit, or a faulty Hybrid/EV Battery Interface Control Module. To fix the issue, visually inspect the wiring harness and connectors for any signs of damage. Pay attention to broken, bent, pushed out, or corroded pins on the connectors.

What should I look for when checking for damaged components and connector pins to resolve the p0acb fault code?

If you’re dealing with the p0acb fault code and your engine light is on, it’s time to take action. The culprit could be a faulty Hybrid/EV Battery Assembly or a poor electrical connection in the Hybrid/EV Battery Assembly circuit. To resolve this issue, visually inspect the wiring harness and connectors. Pay close attention to damaged components and check for broken, bent, pushed out, or corroded connector pins. Don’t delay, get to the bottom of this problem and fix it ASAP.

p0acb error fault code explained

If you see the Engine Light ON or the Service Engine Soon Warning Light, the p0acb fault code might be the culprit.

This code is usually caused by a faulty HybridEV Battery Assembly, an open or shorted harness, a poor electrical connection in the circuit, or a faulty HybridEV Battery Interface Control Module.

To fix it, visually inspect the wiring harness and connectors, check for damaged components, and look for any broken, bent, pushed out, or corroded connector pins.

Scroll to Top