The automobile fault code P0AC6 indicates a problem with the HybridEV Battery Assembly. The most common symptom is the Engine Light being ON or the Service Engine Soon Warning Light.

The cause of this fault code can be a faulty HybridEV Battery Assembly, an open or shorted harness, a poor electrical connection in the circuit, or a faulty HybridEV Battery Interface Control Module. To fix this issue, you should visually inspect the wiring harness and connectors for any damage. Look for broken, bent, pushed out, or corroded pins in the connectors.

The repair time for this issue is estimated to be around 1.0.

It is important to address this problem promptly to prevent further damage to the vehicle’s hybrid or electric system.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

When the engine light is on or the service engine soon warning light is illuminated, it could be a sign of the p0ac6 fault code.

  • The symptoms of the automobile fault code p0ac6 include the Engine Light being ON or the Service Engine Soon Warning Light being illuminated.

The automobile fault code p0ac6 can be caused by a faulty HybridEV Battery Assembly, an open or shorted HybridEV Battery Assembly harness, a poor electrical connection in the HybridEV Battery Assembly circuit, or a faulty HybridEV Battery Interface Control Module.

  • The fault code P0AC6 can be caused by a faulty Hybrid/EV Battery Assembly, an open or shorted Hybrid/EV Battery Assembly harness, a poor electrical connection in the Hybrid/EV Battery Assembly circuit, or a faulty Hybrid/EV Battery Interface Control Module.

To fix the automobile fault code p0ac6, start by visually inspecting the wiring harness, connectors, and components for any damage or corrosion.

  • To fix the automobile fault code p0ac6, start by checking the possible causes mentioned above.
  • Then, visually inspect the wiring harness and connectors related to the issue.
  • Look for any damaged components and check for broken, bent, pushed out, or corroded pins on the connectors.
  • This fix should take approximately 1.0 hour.

The factors influencing the cost of diagnosing and fixing the automobile fault code p0ac6 based on the estimated repair time of 1.0 hour include the hourly rate charged by auto repair shops, which typically ranges between $75 and $150.

The P0AC6 fault code refers to a problem with the HybridEV Battery Temperature Sensor 2.

This sensor is responsible for monitoring the temperature of the battery cell group within the battery sections of the hybrid or electric vehicle. There are two temperature sensors located in each battery section. The battery temperature sensor is a variable resistor that measures the temperature of the battery.

It works by changing its resistance as the temperature changes. When the temperature decreases, the sensor resistance increases, and when the temperature increases, the sensor resistance decreases. The HybridEV Battery Interface Control Module communicates the temperature sensor values to the HybridEV Powertrain Control Module through serial data. The Powertrain Control Module uses these temperature sensor values to determine the overall temperature of the HybridEV Battery Module and control the operation of the battery cooling system. The P0AC6 fault code is triggered when there is a significant difference between the temperature reading of one battery temperature sensor and the average of the other battery temperature sensors.

This difference must be greater than 25°C (45°F) for the code to be set. This fault code indicates a performance issue with the HybridEV Battery Temperature Sensor 2.

What are the possible causes for the automobile fault code p0ac6?

If you see the engine light or service engine soon warning light on, the fault code P0AC6 could be the culprit. This code is often caused by a faulty hybrid/EV battery assembly, an open or shorted harness, a poor electrical connection in the hybrid/EV battery assembly circuit, or a faulty hybrid/EV battery interface control module. To fix the issue, visually inspect the wiring harness and connectors, checking for any damage or broken, bent, pushed out, or corroded pins. Don’t forget to consider the possible causes mentioned above.

How can I visually inspect the wiring harness and connectors to fix the fault code p0ac6?

If you’re dealing with the fault code p0ac6 and your engine light is on, it’s time to take a closer look at the wiring harness and connectors. The possible causes include a faulty Hybrid/EV Battery Assembly, an open or shorted harness, a poor electrical connection in the circuit, or a faulty Hybrid/EV Battery Interface Control Module. To fix the issue, visually inspect the wiring harness and connectors for any signs of damage. Check for broken, bent, pushed out, or corroded pins on the connectors. Don’t forget to examine the components as well.

What should I look for when checking for damaged components and connector’s pins to resolve the fault code p0ac6?

If you’re dealing with the fault code p0ac6 and your engine light is on, it’s important to check for damaged components and connector’s pins. This code is often caused by a faulty Hybrid/EV Battery Assembly or issues with the wiring harness and connectors. To resolve the issue, visually inspect the wiring harness and connectors for any signs of damage. Look out for broken, bent, pushed out, or corroded connector’s pins. By addressing these potential causes, you can effectively fix the problem and get your engine running smoothly again.

p0ac6 error fault code explained

If you’re seeing the Engine Light ON or the Service Engine Soon Warning Light, the p0ac6 fault code might be the culprit.

This code is usually caused by a faulty HybridEV Battery Assembly or issues with the wiring harness and connectors.

To fix it, visually inspect the wiring and connectors for any damage, and check for broken or corroded pins.

Scroll to Top