The automobile fault code P0AA2 indicates a problem with the System Main Relay.

This can be identified by the Engine Light being ON or the Service Engine Soon Warning Light appearing. The cause of this fault code could be a faulty System Main Relay, an open or shorted System Main Relay harness, a poor electrical connection in the System Main Relay circuit, or a faulty HV control ECU.

To fix this issue, you should visually inspect the wiring harness and connectors, checking for any damage or broken, bent, pushed out, or corroded pins in the connectors. The repair time for this problem is estimated to be 1.0. It is important to address this issue promptly to prevent further damage to the vehicle.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

When the engine light is on or the service engine soon warning light is illuminated, it could be a sign of the p0aa2 fault code.

  • The symptoms of the automobile fault code p0aa2 include the Engine Light being ON or the Service Engine Soon Warning Light being illuminated.

The automobile fault code p0aa2 can be caused by a faulty System Main Relay, an open or shorted System Main Relay harness, a poor electrical connection in the System Main Relay circuit, or a faulty HV control ECU.

  • The fault code p0aa2 can be caused by the following: a faulty System Main Relay, an open or shorted System Main Relay harness, a poor electrical connection in the System Main Relay circuit, and a faulty HV control ECU.

To fix the automobile fault code p0aa2, start by visually inspecting the wiring harness, connectors, and components for any damage or corrosion.

  • To fix the automobile fault code p0aa2, first, check the possible causes mentioned above.
  • Then, visually inspect the wiring harness and connectors related to the issue.
  • Look for any damaged components and check for broken, bent, pushed out, or corroded pins in the connectors.
  • This fix is estimated to take approximately 1.0 hour.

The factors influencing the cost of diagnosing and fixing the automobile fault code p0aa2 are the estimated repair time and the hourly rate charged by auto repair shops. The estimated repair time for this fault code is 1.0 hour. Auto repair shops typically charge between $75 and $150 per hour for their services.

These factors will determine the overall cost of diagnosing and fixing the p0aa2 fault code.

The P0AA2 fault code refers to a problem with the Hybrid Battery Positive Contactor Circuit.

This circuit is responsible for connecting and disconnecting the high-voltage power supply in the hybrid vehicle.

The circuit consists of three relays, with two on the positive side and one on the negative side. When connecting, SMR1 and SMR3 turn on initially, followed by SMR2. This process protects the circuit from high-voltage surge current.

To disconnect, SMR2 and SMR3 turn off in that order. The HV control ECU monitors the operation of the relays to ensure they have turned off properly. If there is a malfunction in this circuit, the P0AA2 fault code will be triggered.

This fault code indicates that the Hybrid Battery Positive Contactor Circuit is stuck in the open position, preventing the high-voltage power supply from connecting properly. It is important to address this issue promptly to ensure the safe and efficient operation of the hybrid vehicle.

What are the possible causes for the automobile fault code P0AA2?

If you see the engine light or service engine soon warning light on, the fault code P0AA2 could be the culprit. This code is often caused by a faulty system main relay, an open or shorted relay harness, a poor electrical connection in the relay circuit, or a faulty HV control ECU. To fix the issue, start by visually inspecting the wiring harness and connectors. Look for any damaged components and check for broken, bent, pushed out, or corroded connector pins. Don’t forget to check the possible causes mentioned above.

How can I visually inspect the wiring harness and connectors to fix the P0AA2 fault code?

If you’re dealing with the P0AA2 fault code and notice that your engine light is on, it’s time to take action. The most common causes of this code are a faulty System Main Relay, an open or shorted System Main Relay harness, a poor electrical connection in the System Main Relay circuit, or a faulty HV control ECU. To fix the issue, start by visually inspecting the wiring harness and connectors. Look for any signs of damage, such as broken, bent, pushed out, or corroded pins. This step is crucial in identifying and resolving the problem.

What should I look for when checking for damaged components and connector pins to resolve the P0AA2 fault code?

When resolving the P0AA2 fault code, start by checking for damaged components and connector pins. This can be done by visually inspecting the related wiring harness and connectors. Look for any signs of damage such as broken, bent, pushed out, or corroded connector pins. By doing so, you can identify any issues that may be causing the fault code and take the necessary steps to fix them.

p0aa2 error fault code explained

If you’re seeing the Engine Light ON or the Service Engine Soon Warning Light, it could be due to a faulty System Main Relay or issues with the relay’s harness and circuit. To fix it, visually inspect the wiring harness and connectors, checking for any damage or corrosion.

Look out for broken or bent pins too.

Scroll to Top