[SOLVED] P0A75 Code – Generator Phase W Current: Causes And Fixes

The automobile fault code P0A75 indicates a problem with the Inverter With Converter Assembly.

The most common symptom is the Engine Light being ON or the Service Engine Soon Warning Light.

This fault code can be caused by a faulty Inverter With Converter Assembly, an open or shorted harness, or a poor electrical connection in the circuit. To fix this issue, you should visually inspect the wiring harness and connectors for any damage. Look for broken, bent, pushed out, or corroded pins in the connectors.

The repair time for this issue is estimated to be around 1.0. It is important to address this fault code promptly to prevent further damage to the vehicle.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

When the engine light is on or the service engine soon warning light is illuminated, it could be a sign of the p0a75 fault code.

  • The symptoms of the automobile fault code p0a75 include the Engine Light being ON or the Service Engine Soon Warning Light being illuminated.

The automobile fault code p0a75 can be caused by a faulty inverter with converter assembly, an open or shorted harness, or a poor electrical connection in the circuit.

  • The fault code p0a75 can be caused by a faulty Inverter With Converter Assembly, an open or shorted Inverter With Converter Assembly harness, or a poor electrical connection in the Inverter With Converter Assembly circuit.

To fix the automobile fault code p0a75, start by visually inspecting the wiring harness, connectors, and components for any damage or corrosion.

  • To fix the automobile fault code p0a75, first, check the possible causes mentioned above.
  • Then, visually inspect the wiring harness and connectors related to the issue.
  • Look for any damaged components and check for broken, bent, pushed out, or corroded pins in the connectors.
  • This fix is estimated to take approximately 1.0 hour.

The factors influencing the cost of diagnosing and fixing the automobile fault code p0a75 are the estimated repair time and the hourly rate charged by auto repair shops. The estimated repair time for this fault code is 1.0 hour.

Auto repair shops typically charge between $75 and $150 per hour for their services. These factors will determine the overall cost of diagnosing and fixing the p0a75 fault code.

The P0A75 fault code refers to a malfunction in the generator phase W circuit. The inverter in the vehicle converts the high-voltage direct current from the HV battery and the alternating current for the MG1MG2. The inverter contains a three-phase bridge circuit with power transistors for the MG1 and MG2, which convert the direct current and three-phase alternating current.

The HV control ECU controls the actuation of the power transistors in the inverter. The motor inverter current sensors detect the amperage flowing through the V and W phase cables between the inverter and MG1MG2. The HV control ECU monitors these current sensors to detect any malfunction in the sensor system.

If the P0A75 fault code is triggered, it indicates a problem specifically in the generator phase W circuit.

What are the possible causes for the automobile fault code p0a75?

If you see the engine light or service engine soon warning light on, the fault code P0A75 could be the culprit. This code is often caused by a faulty inverter with converter assembly, an open or shorted harness, or a poor electrical connection in the inverter with converter assembly circuit. To fix this issue, start by visually inspecting the wiring harness and connectors. Look for any signs of damage or corrosion, and check for broken, bent, pushed out, or corroded pins in the connectors.

How can I visually inspect the wiring harness and connectors to fix the fault code p0a75?

If you’re dealing with the fault code p0a75 and your engine light is on, it’s time to take a closer look at the wiring harness and connectors. The possible causes include a faulty inverter with converter assembly, an open or shorted harness, or a poor electrical connection. To fix the issue, visually inspect the wiring harness and connectors. Keep an eye out for any damaged components and check for broken, bent, pushed out, or corroded pins on the connectors. Don’t forget to check the “Possible Causes” listed above for a comprehensive solution.

What should I look for when checking for damaged components and connector’s pins to resolve the fault code p0a75?

When troubleshooting the fault code p0a75, start by visually inspecting the wiring harness and connectors. Look for any signs of damage or corrosion. Pay close attention to the inverter with converter assembly and check for any open or shorted circuits. Additionally, check the connector’s pins for any signs of being broken, bent, pushed out, or corroded. By thoroughly examining these components, you can identify and resolve the issue causing the engine light to be on.

p0a75 error fault code explained

To fix the P0A75 fault code, start by visually inspecting the wiring harness and connectors related to the Inverter With Converter Assembly. Look for any damage or corrosion. Check for broken, bent, pushed out, or corroded connector pins.

Address any issues found to resolve the problem.

Scroll to Top