[SOLVED] P0A69 Code: Drive Motor ‘b’ Phase V Current – Causes And Fixes

The automobile fault code P0A69 indicates a problem with the Inverter With Converter Assembly. The most common symptom is the Engine Light being ON or the Service Engine Soon Warning Light.

This fault code can be caused by a faulty Inverter With Converter Assembly, an open or shorted harness, or a poor electrical connection in the circuit.

To fix this issue, you should visually inspect the wiring harness and connectors for any damage.

Look for broken, bent, pushed out, or corroded pins in the connectors. The repair time for this issue is estimated to be around 1.0. It is important to address this problem promptly to prevent further damage to the vehicle.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

When the engine light is on or the service engine soon warning light is illuminated, it could be a sign of the p0a69 fault code.

  • The symptoms of the automobile fault code p0a69 include the Engine Light being ON or the Service Engine Soon Warning Light being illuminated.

The automobile fault code p0a69 can be caused by a faulty inverter with converter assembly, an open or shorted harness, or a poor electrical connection in the circuit.

  • The fault code p0a69 can be caused by a faulty Inverter With Converter Assembly, an open or shorted Inverter With Converter Assembly harness, or a poor electrical connection in the Inverter With Converter Assembly circuit.

To fix the automobile fault code p0a69, start by visually inspecting the wiring harness, connectors, and components for any damage or corrosion.

  • To fix the automobile fault code p0a69, start by checking the possible causes mentioned above.
  • Then, visually inspect the wiring harness and connectors related to the issue.
  • Look for any damaged components and check for broken, bent, pushed out, or corroded connector pins.
  • This fix is estimated to take approximately 1.0 hour.

The factors influencing the cost of diagnosing and fixing the automobile fault code p0a69 are the estimated repair time of 1.0 hour and the typical hourly rate charged by auto repair shops, which ranges from $75 to $150.

The P0A69 fault code refers to a malfunction in the sensor system of the drive motor ‘B’ phase V cu. The inverter in the vehicle converts the high-voltage direct current of the HV battery and the alternating current for the MG1MG2.

The inverter contains a three-phase bridge circuit with power transistors for the MG1 and MG2, which convert the direct current and the three-phase alternating current. The HV control ECU controls the actuation of the power transistors in the inverter. The motor inverter current sensors detect the amperage that flows through the V and W phase cables between the inverter and MG1MG2.

The HV control ECU monitors these sensors to detect any malfunction in the sensor system.

If the HV control ECU detects a malfunction in the drive motor ‘B’ phase V cu sensor system, it will trigger the P0A69 fault code.

This fault code indicates that there is an issue with the sensor system of the drive motor ‘B’ phase V cu, and it requires attention and diagnosis by a qualified technician.

What are the possible causes for the automobile fault code p0a69?

If you see the engine light or service engine soon warning light on, the fault code P0A69 could be the culprit. This code is often caused by a faulty inverter with converter assembly, an open or shorted harness, or a poor electrical connection in the inverter with converter assembly circuit. To fix this issue, start by visually inspecting the wiring harness and connectors. Look for any signs of damage or corrosion, and check for broken, bent, pushed out, or corroded pins in the connectors.

How can I visually inspect the wiring harness and connectors to fix the fault code p0a69?

If you’re dealing with the fault code p0a69 and your engine light is on, it’s time to take a closer look at the wiring harness and connectors. The cause could be a faulty Inverter With Converter Assembly, an open or shorted harness, or a poor electrical connection in the circuit. To fix it, visually inspect the wiring harness and connectors for any signs of damage. Check for broken, bent, pushed out, or corroded pins on the connectors. Don’t forget to consider the possible causes mentioned earlier.

What should I look for when checking for damaged components and connector’s pins to resolve the fault code p0a69?

When resolving the fault code p0a69, start by checking for damaged components and connector’s pins. Visually inspect the related wiring harness and connectors, looking for any signs of damage such as broken, bent, pushed out, or corroded pins. This can help identify if the issue lies with a faulty inverter with converter assembly, an open or shorted harness, or a poor electrical connection in the inverter with converter assembly circuit. Take the time to thoroughly examine these areas to ensure a proper fix.

p0a69 error fault code explained

To fix the p0a69 fault code, start by visually inspecting the wiring harness and connectors related to the Inverter With Converter Assembly.

Look for any damage or corrosion. Check for broken, bent, or pushed out pins on the connectors.

Address any issues found to resolve the problem.

Scroll to Top