[SOLVED] P0A60 Code: Drive Motor ‘a’ Phase V Current – Troubleshooting And Fix

The automobile fault code P0A60 indicates a problem with the Inverter With Converter Assembly. The most common symptom is the Engine Light being ON or the Service Engine Soon Warning Light. This fault code can be caused by a faulty Inverter With Converter Assembly, an open or shorted harness, or a poor electrical connection in the circuit.

To fix this issue, you should visually inspect the wiring harness and connectors for any damage. Look for broken, bent, pushed out, or corroded pins in the connectors.

The repair time for this fault code is estimated to be 1.0. It is important to address this issue promptly to prevent further damage to the vehicle’s electrical system.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

When the engine light is on or the service engine soon warning light is illuminated, it could be a sign of the p0a60 fault code.

  • The symptoms of the automobile fault code p0a60 include the Engine Light being ON or the Service Engine Soon Warning Light being illuminated.

The automobile fault code p0a60 can be caused by a faulty inverter with converter assembly, an open or shorted harness, or a poor electrical connection in the circuit.

  • The fault code p0a60 can be caused by a faulty Inverter With Converter Assembly, an open or shorted Inverter With Converter Assembly harness, or a poor electrical connection in the Inverter With Converter Assembly circuit.

To fix the automobile fault code p0a60, start by visually inspecting the wiring harness, connectors, and components for any damage or corrosion.

  • To fix the automobile fault code p0a60, start by checking the possible causes mentioned above.
  • Then, visually inspect the wiring harness and connectors related to the issue.
  • Look for any damaged components and check for broken, bent, pushed out, or corroded connector pins.
  • This fix typically takes around 1.0 hour to complete.

The factors influencing the cost of diagnosing and fixing the automobile fault code p0a60 include the estimated repair time of 1.0 hour. Auto repair shops typically charge between $75 and $150 per hour for their services. These factors contribute to the overall cost of resolving the fault code.

The P0A60 fault code refers to a malfunction in the sensor system of the drive motor ‘A’ phase V cu. The inverter in the vehicle converts the high-voltage direct current of the HV battery and the alternating current for the MG1MG2.

The HV control ECU controls the actuation of the power transistors in the inverter. The motor inverter current sensors detect the amperage that flows through the V and W phase cables between the inverter and MG1MG2.

The HV control ECU monitors the inverter current sensors to detect any malfunction in the sensor system.

If the P0A60 fault code is detected, it indicates a problem with the drive motor ‘A’ phase V cu, and further diagnosis and repair are required.

What are the possible causes for the automobile fault code p0a60?

If you see the engine light or service engine soon warning light on, the fault code P0A60 could be the culprit. This code is often caused by a faulty inverter with converter assembly, an open or shorted harness, or a poor electrical connection in the inverter with converter assembly circuit. To fix this issue, start by visually inspecting the wiring harness and connectors. Look for any signs of damage or corrosion, and check for broken, bent, pushed out, or corroded pins in the connectors.

How can I visually inspect the wiring harness and connectors to fix the fault code p0a60?

If you’re dealing with the fault code p0a60 and your engine light is on, it’s time to take a closer look at the wiring harness and connectors. The possible causes include a faulty inverter with converter assembly, an open or shorted harness, or a poor electrical connection. To fix the issue, visually inspect the wiring harness and connectors. Keep an eye out for any damaged components and check for broken, bent, pushed out, or corroded pins on the connectors. Don’t forget to check the “Possible Causes” listed above for a comprehensive solution.

What should I look for when checking for damaged components and connector’s pins to resolve the fault code p0a60?

When troubleshooting the fault code p0a60, start by visually inspecting the wiring harness and connectors related to the Inverter With Converter Assembly. Look for any signs of damage and check for broken, bent, pushed out, or corroded connector’s pins. These issues can cause a poor electrical connection and lead to the engine light being on. By checking and addressing these potential causes, you can resolve the fault code and ensure proper functioning of the vehicle.

p0a60 error fault code explained

To fix the P0A60 fault code, start by visually inspecting the wiring harness and connectors related to the Inverter With Converter Assembly.

Look for any damage or corrosion. Check for broken, bent, or pushed out pins on the connectors. Address any issues found to resolve the problem.

Scroll to Top