The automobile fault code P099F indicates a problem with the Shift Solenoid ‘H’ in the vehicle’s transmission system.
This can be identified by the Engine Light or Service Engine Soon Warning Light being illuminated. The cause of this fault code could be a faulty Shift Solenoid ‘H’, an open or shorted harness, or a poor electrical connection in the Shift Solenoid ‘H’ circuit. To fix this issue, it is recommended to visually inspect the wiring harness and connectors for any damage, and check for broken, bent, pushed out, or corroded pins in the connectors.
The repair time for this issue is estimated to be around 1.0 hour. It is important to address this fault code promptly to ensure proper functioning of the transmission system.
Repair Importance Level | 10.0 (Out of 10) |
Estimated Repair Time | Approximately 1.0 hour |
Repair Difficulty Level | 10.0 (Out of 10) |
I know how frustrating it is to see that warning light pop up again and again. You don’t need to spend money at the mechanic just to clear it. With this pocket-friendly automatic car scanner, you can do it yourself in seconds and and avoid the time and inconvenience of driving to a mechanic. Just plug it in, connect to your Android or iOS phone, and instantly see live data. Understand the fault code, clear it right away, and decide if it’s something urgent or if you’re good to drive. It even monitors your car and sends notifications to your phone, so you’re always in control. Simple, fast, and stress-free—today’s offer price!
P099F Fault Code Symptoms: Identifying The Telltale Signs Of Trouble
When the engine light is on or the service engine soon warning light is illuminated, it could be a sign of the p099f fault code.
- The symptoms of the automobile fault code p099f include the Engine Light being ON or the Service Engine Soon Warning Light being illuminated.
Unraveling The Mystery: What Causes Fault Code P099F?
The automobile fault code p099f can be caused by a faulty Shift Solenoid ‘H’, an open or shorted Shift Solenoid ‘H’ harness, or a poor electrical connection in the Shift Solenoid ‘H’ circuit.
- The fault code P099F can be caused by the following: a faulty Shift Solenoid ‘H’, an open or shorted Shift Solenoid ‘H’ harness, and a poor electrical connection in the Shift Solenoid ‘H’ circuit.
Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)
Fixing Code P099F: Simple Steps To Resolve The Issue
To fix the automobile fault code p099f, start by visually inspecting the wiring harness, connectors, and components for any damage or corrosion.
- To fix the automobile fault code p099f, start by checking the possible causes mentioned above.
- Then, visually inspect the wiring harness and connectors related to the issue.
- Look for any damaged components and check for broken, bent, pushed out, or corroded connector pins.
- This fix is estimated to take approximately 1.0 hour.
Cracking The Code: P099F – Cost And Complexity Unveiled!
The automobile fault code p099f diagnosis and fixing cost is influenced by the estimated repair time of 1.0 hour.
Auto repair shops typically charge between $75 and $150 per hour for their services.
P099F: Understanding The Transmission Fluid Pressure Sensor A Circuit Low
The P099F fault code refers to the Shift Solenoid ‘H’ Control Circuit being too high.
This code is set by the Transmission Control Module (TCM) when it detects that the Shift Solenoid is not operating within the factory specifications. The Shift Solenoid is responsible for controlling the flow of transmission fluid, which in turn determines the gear shifting in the vehicle.
When the TCM detects that the Shift Solenoid ‘H’ Control Circuit is too high, it means that there is an issue with the electrical circuit that controls the solenoid. This fault code indicates that there may be a problem with the wiring, connectors, or the solenoid itself. It is important to address this issue promptly, as it can lead to improper gear shifting and potential damage to the transmission if left unresolved.
A qualified technician should diagnose and repair the underlying cause of the P099F fault code to ensure the proper functioning of the transmission system.
FAQ
If you’re seeing the engine light on or the service engine soon warning light, the fault code P099F might be the culprit. This code is often caused by a faulty shift solenoid ‘H’, an open or shorted shift solenoid ‘H’ harness, or a poor electrical connection in the shift solenoid ‘H’ circuit. To fix this issue, start by visually inspecting the wiring harness and connectors. Look out for any damaged components and check for broken, bent, pushed out, or corroded connector pins. Don’t forget to check the possible causes mentioned above for a comprehensive solution.
To fix the issue of the Engine Light being ON or the Service Engine Soon Warning Light, start by visually inspecting the wiring harness and connectors. This can help identify the cause, which could be a faulty Shift Solenoid ‘H’, an open or shorted Shift Solenoid ‘H’ harness, or a poor electrical connection in the Shift Solenoid ‘H’ circuit. Check for any damaged components and look closely for broken, bent, pushed out, or corroded pins in the connectors. This thorough inspection can help pinpoint the problem and guide you towards the appropriate fix.
When troubleshooting a faulty shift solenoid ‘H’ that is causing the engine light to turn on, it’s important to visually inspect the wiring harness and connectors. Look for any damaged components and pay close attention to the connector pins. Check for any signs of corrosion, as well as broken, bent, or pushed out pins. These issues can often be the cause of poor electrical connections and can be easily identified during a thorough inspection.

Wrap Up
If your engine light is on and you’re getting the P099F fault code, it could be due to a faulty Shift Solenoid ‘H’, an open or shorted Shift Solenoid ‘H’ harness, or a poor electrical connection in the Shift Solenoid ‘H’ circuit.
To fix it, visually inspect the wiring harness and connectors, check for damaged components, and look for any broken, bent, pushed out, or corroded connector pins.