[SOLVED] P0984 Code: Fixing Shift Solenoid ‘e’ Control Circuit Range/Performance Issue

Are you wondering what the automobile fault code P0984 means?

Well, when you see the Engine Light ON or the Service Engine Soon Warning Light, it could be an indication of this fault code. The P0984 code is typically caused by a faulty Shift Solenoid ‘E’, an open or shorted Shift Solenoid ‘E’ harness, or a poor electrical connection in the Shift Solenoid ‘E’ circuit. To fix this issue, you should visually inspect the wiring harness and connectors, checking for any damage or corrosion.

It’s important to look out for broken, bent, pushed out, or corroded connector pins. The repair for this fault code usually takes around 1.0 hour.

So, if you encounter this fault code, make sure to address it promptly to avoid any further complications.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

When the engine light is on or the service engine soon warning light is illuminated, it could be a sign of the automobile fault code: p0984.

  • The symptoms of the automobile fault code P0984 include the Engine Light being ON or the Service Engine Soon Warning Light being illuminated.

The automobile fault code p0984 can be caused by a faulty Shift Solenoid ‘E’, an open or shorted Shift Solenoid ‘E’ harness, or a poor electrical connection in the Shift Solenoid ‘E’ circuit.

  • The fault code P0984 can be caused by the following: a faulty Shift Solenoid ‘E’, an open or shorted Shift Solenoid ‘E’ harness, and a poor electrical connection in the Shift Solenoid ‘E’ circuit.

To fix the automobile fault code p0984, start by visually inspecting the wiring harness, connectors, and components for any damage or corrosion.

  • To fix the automobile fault code p0984, start by checking the possible causes mentioned above.
  • Then, visually inspect the wiring harness and connectors related to the issue.
  • Look for any damaged components and check if there are any broken, bent, pushed out, or corroded pins in the connectors.
  • This fix is estimated to take approximately 1.0 hour.

The factors influencing the diagnosis and fixing cost of the automobile fault code p0984 are the estimated repair time and the hourly rate charged by auto repair shops. The estimated repair time for this fault code is 1.0 hour. Auto repair shops typically charge between $75 and $150 per hour for their services.

These factors will determine the overall cost of diagnosing and fixing the p0984 fault code.

The P0984 fault code refers to a problem with the control circuit range or performance of shift solenoid ‘E’.

The Engine Control Module (ECM) is responsible for commanding gear shifts by turning the shift solenoid valves on and off. When there is an open or short circuit in the shift solenoid valve circuit, the ECM detects the issue and triggers the engine light to illuminate. It also stores the Diagnostic Trouble Code (DTC) for reference.

In this case, the ECM activates the fail-safe function and turns the other shift solenoid valves that are in good condition on and off.

This fault code indicates a potential issue with the control circuit of shift solenoid ‘E’.

What are the possible causes for the automobile fault code p0984?

If you see the engine light or service engine soon warning light on, the fault code P0984 could be the culprit. This code is often caused by a faulty shift solenoid ‘E’, an open or shorted shift solenoid ‘E’ harness, or a poor electrical connection in the shift solenoid ‘E’ circuit. To fix this issue, start by visually inspecting the wiring harness and connectors. Look for any damaged components and check for broken, bent, pushed out, or corroded connector pins. Don’t forget to check the possible causes listed above for a comprehensive solution.

How can I visually inspect the wiring harness and connectors to fix the issue?

To fix the issue of the Engine Light being ON or the Service Engine Soon Warning Light, start by checking the possible causes mentioned above. Then, visually inspect the wiring harness and connectors related to the Shift Solenoid ‘E’. Look for any damaged components and check if there are any broken, bent, pushed out, or corroded pins in the connectors. This thorough inspection will help identify any issues with the wiring and connectors, allowing you to fix the problem effectively.

What should I look for when checking for damaged components or corroded connector pins?

When checking for damaged components or corroded connector pins, start by visually inspecting the related wiring harness and connectors. Look for any signs of damage such as broken, bent, pushed out, or corroded connector pins. These issues can cause a faulty shift solenoid ‘E’ and result in the engine light being on. By checking for these issues, you can identify and fix the problem effectively.

p0984 error fault code explained

If you’re seeing the Engine Light ON or Service Engine Soon Warning Light, the likely cause is a faulty Shift Solenoid ‘E’. To fix it, visually inspect the wiring harness and connectors, checking for any damage or corrosion. Look out for broken, bent, pushed out, or corroded connector pins.

Scroll to Top