[SOLVED] P0980 Code: Fixing High Control Circuit In Shift Solenoid ‘c’

The automobile fault code P0980 indicates a problem with the Shift Solenoid ‘C’ in the transmission. This can cause the Engine Light to turn on or the Service Engine Soon Warning Light to illuminate. The possible causes include a faulty Shift Solenoid ‘C’, an open or shorted harness, or a poor electrical connection in the Shift Solenoid ‘C’ circuit.

To fix this issue, you should visually inspect the wiring harness and connectors for any damage. Look for broken, bent, pushed out, or corroded pins in the connectors. The repair time for this issue is estimated to be around 1.0 hour.

It is important to address this problem promptly to prevent further damage to the transmission.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

When the engine light is on or the service engine soon warning light is illuminated, it could be a sign of the p0980 fault code.

  • The symptoms of the automobile fault code P0980 include the Engine Light being ON or the Service Engine Soon Warning Light being illuminated.

The automobile fault code P0980 can be caused by a faulty Shift Solenoid ‘C’, an open or shorted Shift Solenoid ‘C’ harness, or a poor electrical connection in the Shift Solenoid ‘C’ circuit.

  • The fault code P0980 can be caused by the following: a faulty Shift Solenoid ‘C’, an open or shorted Shift Solenoid ‘C’ harness, and a poor electrical connection in the Shift Solenoid ‘C’ circuit.

To fix the automobile fault code p0980, start by visually inspecting the wiring harness, connectors, and components for any damage or corrosion.

  • To fix the automobile fault code P0980, start by checking the possible causes mentioned above.
  • Then, visually inspect the wiring harness and connectors related to the issue.
  • Look for any damaged components and check if there are any broken, bent, pushed out, or corroded pins in the connectors.
  • This fix is estimated to take approximately 1.0 hour.

The factors influencing the diagnosis and fixing cost of the automobile fault code P0980 are the estimated repair time of 1.0 hour and the average hourly rate charged by auto repair shops, which ranges between $75 and $150.

The P0980 fault code refers to a problem with the control circuit for shift solenoid ‘C’ in the vehicle’s transmission system.

The Engine Control Module (ECM) is responsible for commanding gear shifts by turning the shift solenoid valves on and off. When there is an open or short circuit in the shift solenoid ‘C’ control circuit, the ECM detects the issue and triggers the engine light to illuminate.

Additionally, the ECM activates the fail-safe function, which turns the other shift solenoid valves that are in good condition on and off. This fault code indicates a high voltage condition in the control circuit for shift solenoid ‘C’.

What are the possible causes of the automobile fault code P0980?

If you see the engine light or service engine soon warning light on, the fault code P0980 could be the culprit. This code is often caused by a faulty shift solenoid ‘C’, an open or shorted shift solenoid ‘C’ harness, or a poor electrical connection in the shift solenoid ‘C’ circuit. To fix this issue, start by visually inspecting the wiring harness and connectors. Look for any damaged components and check for broken, bent, pushed out, or corroded connector pins. Don’t forget to check the possible causes listed above for a comprehensive solution.

How can I visually inspect the wiring harness and connectors to fix the issue?

To fix the issue of the Engine Light being ON or the Service Engine Soon Warning Light, start by checking the possible causes, which include a faulty Shift Solenoid ‘C’, an open or shorted Shift Solenoid ‘C’ harness, or a poor electrical connection in the Shift Solenoid ‘C’ circuit. To visually inspect the wiring harness and connectors, look for any damaged components and check for broken, bent, pushed out, or corroded pins in the connectors. This thorough inspection will help identify any issues and guide you towards the appropriate fix.

What should I look for when checking for damaged components or corroded connector pins?

When troubleshooting a Engine Light ON or Service Engine Soon Warning Light, it’s important to check for damaged components and corroded connector pins. These issues can be the cause of a faulty Shift Solenoid ‘C’, an open or shorted Shift Solenoid ‘C’ harness, or a poor electrical connection in the Shift Solenoid ‘C’ circuit. To fix the problem, visually inspect the wiring harness and connectors, paying close attention to any signs of damage. Look for broken, bent, pushed out, or corroded pins on the connectors.

p0980 error fault code explained

If your engine light is on and you’re getting the P0980 fault code, it could be due to a faulty Shift Solenoid ‘C’, an open or shorted Shift Solenoid ‘C’ harness, or a poor electrical connection in the Shift Solenoid ‘C’ circuit.

To fix it, visually inspect the wiring harness and connectors, check for damaged components, and look for any broken, bent, pushed out, or corroded connector pins.

Scroll to Top