[SOLVED] P0973 Code: Fix Low Shift Solenoid ‘a’ Control Circuit With Ease!

Are you experiencing trouble with your vehicle’s transmission? The fault code P0973 might be the culprit. This code indicates a problem with the Shift Solenoid ‘A’.

Symptoms of this issue can include erratic shifting, transmission slipping, or even a complete failure to shift gears. The cause of this fault code could be a faulty Shift Solenoid ‘A’, an open or shorted harness, or a poor electrical connection. To fix this problem, start by visually inspecting the wiring harness and connectors for any damage.

Look out for broken, bent, pushed out, or corroded pins on the connectors.

This repair is of moderate importance and difficulty, with an estimated repair time of 1.0. Don’t delay in addressing this issue, as it can lead to further damage to your transmission if left unresolved.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

Experiencing shifting issues, delayed engagement, or a complete loss of transmission function?

Check out the symptoms of fault code p0973 below.

  • The symptoms of the automobile fault code P0973 include: harsh or delayed shifting, transmission slipping, inability to shift gears, erratic or unpredictable shifting, transmission overheating, illuminated check engine light, reduced fuel efficiency, and decreased engine performance.

The automobile fault code p0973 can be caused by a faulty Shift Solenoid ‘A’, an open or shorted Shift Solenoid ‘A’ harness, or a poor electrical connection in the Shift Solenoid ‘A’ electrical circuit.

  • The fault code P0973 can be caused by the following: a faulty Shift Solenoid ‘A’, an open or shorted Shift Solenoid ‘A’ harness, and a poor electrical connection in the Shift Solenoid ‘A’ electrical circuit.

To fix the automobile fault code p0973, start by visually inspecting the wiring harness, connectors, and components for any damage or corrosion.

  • To fix the automobile fault code p0973, start by checking the possible causes mentioned above.
  • Then, visually inspect the wiring harness and connectors for any damage.
  • Look for broken, bent, pushed out, or corroded pins in the connectors.
  • This fix is estimated to take approximately 1.0 hour.

The factors influencing the diagnosis and fixing cost of the automobile fault code p0973 are the estimated repair time of 1.0 hour and the average hourly rate charged by auto repair shops, which ranges between $75 and $150.

When you see the Engine Light ON or the Service Engine Soon Warning Light, it could be an indication of a fault code called p0973. This fault code specifically relates to a problem with the shift solenoid A control circuit.

The shift solenoid is responsible for controlling the flow of transmission fluid, which is crucial for smooth gear shifting. When this circuit malfunctions, it can lead to issues with shifting gears, such as delayed or harsh shifting.

It is important to address this fault code promptly to ensure proper functioning of your vehicle’s transmission system.

What are the possible causes of fault code P0973 in an automobile?

The fault code P0973 in an automobile can be caused by a faulty Shift Solenoid ‘A’, an open or shorted Shift Solenoid ‘A’ harness, or a poor electrical connection in the Shift Solenoid ‘A’ electrical circuit. To fix this issue, visually inspect the wiring harness and connectors for any damage. Check for broken, bent, pushed out, or corroded pins in the connectors. Additionally, refer to the “Possible Causes” listed above for further troubleshooting.

How can I visually inspect the wiring harness and connectors related to Shift Solenoid ‘A’?

To visually inspect the wiring harness and connectors related to Shift Solenoid ‘A’, start by checking for any damaged components and looking for broken, bent, pushed out, or corroded connector pins. This can help identify any issues with the Shift Solenoid ‘A’ harness, such as an open or shorted circuit or poor electrical connection. Make sure to thoroughly examine the wiring harness and connectors to ensure they are in good condition.

What should I look for when checking for damaged components or corroded connector pins in relation to fault code P0973?

When checking for damaged components or corroded connector pins in relation to fault code P0973, it is important to visually inspect the related wiring harness and connectors. Look for any broken, bent, pushed out, or corroded connector pins. These issues can cause a poor electrical connection and lead to the faulty Shift Solenoid ‘A’ that triggers the code. To fix the problem, check the possible causes mentioned above and address any damaged components or corroded pins.

p0973 error fault code explained

If you’re experiencing issues with your vehicle’s shifting, the P0973 fault code may be the culprit. This code is typically caused by a faulty Shift Solenoid ‘A’, an open or shorted harness, or a poor electrical connection.

To fix the problem, visually inspect the wiring harness and connectors for any damage, and check for broken, bent, pushed out, or corroded pins on the connectors.

Scroll to Top