[SOLVED] P085D Code: Fixing Gear Shift Control Module ‘a’ Performance Issue

The automobile fault code P085D indicates a problem with the Gear Shift Control Module ‘B’. The most common symptom is the Engine Light being ON or the Service Engine Soon Warning Light.

The cause of this fault code can be a faulty module, an open or shorted harness, or a poor electrical connection in the module circuit.

To fix this issue, it is recommended to visually inspect the wiring harness and connectors for any damage.

Look out for broken, bent, pushed out, or corroded pins in the connectors.

The repair time for this fault code is estimated to be 1.0.

To interpret the fault code, check the “Possible Causes” mentioned above and perform the necessary inspections and repairs.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

When the engine light is on or the service engine soon warning light is illuminated, it could be a sign of the p085d fault code.

  • The symptoms of the automobile fault code p085d include the Engine Light being ON or the Service Engine Soon Warning Light being illuminated.

The automobile fault code p085d can be caused by a faulty Gear Shift Control Module ‘B’, an open or shorted harness, or a poor electrical connection in the circuit.

  • The fault code p085d can be caused by the following: a faulty Gear Shift Control Module ‘B’, an open or shorted harness in the Gear Shift Control Module ‘B’, and a poor electrical connection in the Gear Shift Control Module ‘B’ circuit.

To fix the p085d fault code, start by visually inspecting the wiring harness, connectors, and components for any damage or corrosion.

  • To fix the automobile fault code p085d, start by checking the possible causes mentioned above.
  • Then, visually inspect the wiring harness and connectors for any damage.
  • Look for broken, bent, pushed out, or corroded pins on the connectors.
  • This fix should take approximately 1.0 hour.

The automobile fault code p085d can be diagnosed and fixed within an estimated repair time of 1.0 hour. The cost of the repair will depend on the hourly rate charged by the auto repair shop, which typically ranges between $75 and $150 per hour.

The P085D fault code refers to a problem with the Gear Shift Control Module ‘A’ performance. This code is set by the Engine Control Module (ECM) when there is an issue with communication between the ECM and the Gear Shift Control Module.

The ECM monitors the Gear Shift Control Module and triggers the OBDII code when a problem is detected. It is important to address this fault code promptly to ensure proper functioning of the gear shift system in your automobile.

What are the possible causes for the engine light being on or the service engine soon warning light being illuminated with the fault code p085d?

If you see the engine light or service engine soon warning light illuminated with the fault code p085d, it could be due to a faulty Gear Shift Control Module ‘B’, an open or shorted harness, or a poor electrical connection in the Gear Shift Control Module ‘B’ circuit. To fix this issue, visually inspect the wiring harness and connectors, checking for any damage or broken, bent, pushed out, or corroded pins in the connectors. Make sure to address any issues found during the inspection.

How can I visually inspect the wiring harness and connectors related to the Gear Shift Control Module ‘B’ to fix the fault code p085d?

To fix the fault code p085d related to the Gear Shift Control Module ‘B’, start by visually inspecting the wiring harness and connectors. Look for any damaged components and check if there are any broken, bent, pushed out, or corroded pins in the connectors. This can help identify if the issue lies with a faulty module or if there is an open or shorted circuit. Don’t forget to check the “Possible Causes” mentioned above for further troubleshooting.

What should I look for when checking for damaged components and examining the connector’s pins to resolve the fault code p085d?

When resolving the fault code p085d, start by checking for the following: Engine Light ON (or Service Engine Soon Warning Light). The possible causes include a faulty Gear Shift Control Module ‘B’, an open or shorted harness for the Gear Shift Control Module ‘B’, or a poor electrical connection in the Gear Shift Control Module ‘B’ circuit. To fix this issue, visually inspect the related wiring harness and connectors. Look for any damaged components and examine the connector’s pins for any signs of being broken, bent, pushed out, or corroded.

p085d error fault code explained

If you see the Engine Light ON or Service Engine Soon Warning Light, it could be due to a faulty Gear Shift Control Module ‘B’. To fix it, visually inspect the wiring harness and connectors, checking for any damage or corrosion. Look out for broken or bent pins on the connectors.

Scroll to Top