The OBD code P025E indicates a problem with the Turbocharger Boost Pressure (TCBP) or Charge Air Cooler Temperature (CACT) sensor circuit.
Symptoms include the Engine Light being ON.
Causes may include sensor faults or wiring issues.
This issue should be addressed promptly to prevent potential engine performance issues.
A possible fix involves inspecting and repairing the sensor harness and connectors for any damage or poor connections.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 10.0 (Out of 10) |
I know how frustrating it is to see that warning light pop up again and again. You don’t need to spend money at the mechanic just to clear it. With this pocket-friendly automatic car scanner, you can do it yourself in seconds and and avoid the time and inconvenience of driving to a mechanic. Just plug it in, connect to your Android or iOS phone, and instantly see live data. Understand the fault code, clear it right away, and decide if it’s something urgent or if you’re good to drive. It even monitors your car and sends notifications to your phone, so you’re always in control. Simple, fast, and stress-free—today’s offer price!
Symptoms of the p025e OBD Code
The vehicle may experience a lack of power under heavy acceleration with fault code P025E.
- Symptoms: Engine Light ON.
- Possible lack of power during acceleration.
- Engine may run rough or misfire.
- Vehicle may have poor fuel economy.
Causes of the p025e OBD Code
Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)
P025E code typically indicates an issue with the fuel injection pump module control circuit.
- P025E can be caused by a faulty Turbocharger Boost Pressure (TCBP) Sensor.
- A faulty Charge Air Cooler Temperature (CACT) sensor.
- The TCBP Sensor harness being open or shorted.
- A poor electrical connection in the TCBP sensor circuit.
- The CACT Sensor harness being open or shorted.
- A poor electrical connection in the CACT sensor circuit.
Fixing Error Code p025e Step By Step
Repairing fault code P025E involves replacing the fuel pump module control circuit range/performance.
- To fix OBDII code P025E, first, review the possible causes related to this code.
- Visually inspect the wiring harness and connectors associated with the fuel pump module.
- Check for any damaged components and ensure the connector pins are not broken, bent, pushed out, or corroded.
- If no issues are found with the wiring and connectors, consider replacing the fuel pump module itself.
- After replacing the module, clear the fault codes and perform a test drive to verify that the issue has been resolved.
Cost Of Fixing p025e Fault Code
Diagnosing and repairing fault code P025E may involve inspecting and replacing the fuel pump module.
The cost to diagnose and fix OBD code P025E typically ranges from $75 to $150, with an estimated repair time of 1. 0 hour.
Costs depend on labor rates, shop fees, and the complexity of the repair needed.
Details of the p025e OBD Code
P025E code indicates a fuel injection pump module control circuit range/performance issue.
OBD code P025E means Fuel Injection Pump A Control Stuck Closed.
This code is triggered by the Engine Control Module (ECM) when it detects that the fuel injection pump A control is stuck in the closed position.
This can lead to issues with fuel delivery to the engine, affecting its performance and efficiency.
The fuel injection pump is a critical component responsible for delivering the right amount of fuel to the engine cylinders for combustion.
When this control is stuck closed, it can result in poor engine operation and potential drivability issues.
Mechanic’s Tech Notes
Detailed information on fault code P025E, including symptoms, causes, and solutions for effective troubleshooting.
To diagnose and fix OBDII code P025E, start by checking the Transmission Control Module (TCM) power and ground using a multimeter.
Verify TCM communication over the Controller Area Network (CAN) network with a scan tool.
If the TCM does not respond, reprogramming or reflashing may be necessary.
Visually inspect the wiring harness and connectors for any damage, and ensure connector pins are not broken, bent, pushed out, or corroded.
This thorough inspection can help identify and resolve the issue causing the P025E fault code.
FAQ
OBD code P025E indicates an issue with the Turbocharger Boost Pressure (TCBP) Sensor or Charge Air Cooler Temperature (CACT) sensor circuit. Check wiring and connectors for faults.
Common symptoms of OBD code P025E include Engine Light ON, caused by issues like faulty TCBP or CACT sensors, sensor harness faults, or poor electrical connections. Fix involves inspecting and repairing related components.
Diagnose and repair OBD code P025E by checking the Turbocharger Boost Pressure (TCBP) and Charge Air Cooler Temperature (CACT) sensors, their circuits, and related wiring for faults.
Wrap Up
If your vehicle displays OBDII code P025E along with rough idling or stalling, it may indicate a fault in the fuel pump module control circuit.
This could be caused by a damaged fuel pump module, faulty wiring connections, or a defective fuel pump driver module.
To address OBDII code P025E, start by inspecting the wiring harness for any visible damage or loose connections.
Test the fuel pump module and its connections for proper functionality.
If necessary, replace the fuel pump module or repair any damaged wiring to resolve the issue effectively.
